Load data for .30 PICRA + .308 | 200gr | Rhino Solid Shank

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 200gr \| Rhino Solid Shank
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5238_C311
Last updated:	2026-01-31

Load data for 46 loads in caliber .30 PICRA with .308 | 200gr | Rhino Solid Shank bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35404	87%	**40	100%
ADI APS 450	<<locked>>	63%	36216	89%	**6	100%
Accurate 4100	<<locked>>	73%	36289	89%	**38	95%
[Accurate No. 11 FS]*	<<locked>>	82%	36172	89%	**48	88%
Accurate Solo 1250	<<locked>>	62%	36390	90%	**8	100%
Alliant 2400	<<locked>>	69%	35911	88%	**38	97%
Alliant BLUE DOT	<<locked>>	72%	36216	89%	**09	100%
Alliant Herco	<<locked>>	70%	35346	87%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	35505	87%	**6	100%
Hodgdon H110	<<locked>>	77%	35433	87%	**61	92%
Hodgdon LilGun	<<locked>>	78%	36463	90%	**01	98%
Maxam CSB 1	<<locked>>	64%	36260	89%	**5	100%
Ramshot Enforcer	<<locked>>	69%	36042	89%	**45	98%
ReloadSwiss RS 30	<<locked>>	93%	35723	88%	**88	95%
SNPE Vectan A0	<<locked>>	62%	35157	87%	**5	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	95%	36143	89%	**35	99%
SNPE Vectan BA7 1/2	<<locked>>	66%	35462	87%	**01	100%
Somchem S265	<<locked>>	85%	36376	90%	**25	91%
Vihtavuori 3N38	<<locked>>	68%	35940	89%	**76	100%
Vihtavuori N105	<<locked>>	71%	35607	88%	**86	100%
Vihtavuori N110	<<locked>>	86%	35781	88%	**55	97%
Vihtavuori N32C Tin Star	<<locked>>	78%	35810	88%	**3	100%
[Winchester 296]*	<<locked>>	77%	35810	88%	**78	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26585	65%	**8	100%
ADI APS 450	<<locked>>	61%	34606	85%	**3	100%
[Accurate 4100]*	<<locked>>	61%	24294	60%	**4	88%
[Accurate No. 11 FS]*	<<locked>>	70%	24671	61%	**1	81%
Accurate Solo 1250	<<locked>>	60%	34737	86%	**5	100%
Alliant 2400	<<locked>>	61%	27282	67%	**14	93%
Alliant BLUE DOT	<<locked>>	61%	26165	64%	**8	98%
Alliant Herco	<<locked>>	61%	27717	68%	**9	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	65%	28979	71%	**0	100%
[Hodgdon H110]*	<<locked>>	61%	21509	53%	**8	82%
[Hodgdon LilGun]*	<<locked>>	61%	20030	49%	**8	88%
Maxam CSB 1	<<locked>>	61%	33301	82%	**6	100%
Ramshot Enforcer	<<locked>>	61%	27441	68%	**27	94%
[ReloadSwiss RS 30]*	<<locked>>	69%	18014	44%	**6	80%
SNPE Vectan A0	<<locked>>	61%	33707	83%	**8	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	16085	40%	**7	87%
SNPE Vectan BA7 1/2	<<locked>>	62%	31531	78%	**1	100%
[Somchem S265]*	<<locked>>	65%	20726	51%	**2	80%
Vihtavuori 3N38	<<locked>>	60%	28529	70%	**1	100%
Vihtavuori N105	<<locked>>	60%	25686	63%	**8	100%
[Vihtavuori N110]*	<<locked>>	61%	16636	41%	**6	85%
Vihtavuori N32C Tin Star	<<locked>>	74%	33185	82%	**0	100%
[Winchester 296]*	<<locked>>	64%	23598	58%	**01	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data