top of page

Load data for .30 PICRA + .308 | 200gr | Barnes TSX S

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 200gr | Barnes TSX S

Load Specifications

Bullet:
.308 | 200gr | Barnes TSX S
Manufacturer SKU:
30356
Bullet Weight:
200gr | 13.0g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.497" | 38.0mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.172" | 55.2mm
Seated Depth:
0.616" | 15.6mm
Shank Seated Depth:
0.616" | 15.6mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B641_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .30 PICRA with .308 | 200gr | Barnes TSX S bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
77%
35012
86%
**1
100%
ADI APS 450
<<locked>>
66%
36521
90%
**4
100%
Accurate 4100
<<locked>>
79%
36201
89%
**86
92%
[Accurate No. 11 FS]*
<<locked>>
87%
34243
84%
**76
85%
Accurate No. 9
<<locked>>
66%
34490
85%
**56
97%
Accurate TCM
<<locked>>
67%
35259
87%
**56
98%
Alliant 2400
<<locked>>
75%
35520
87%
**79
95%
Alliant BLUE DOT 👍
<<locked>>
78%
36056
89%
**56
99%
[Hodgdon H110]*
<<locked>>
83%
33794
83%
**93
89%
Hodgdon LilGun
<<locked>>
87%
36303
89%
**58
96%
Hodgdon TrailBoss
<<locked>>
94%
22727
56%
**2
100%
Lovex D037.2
<<locked>>
65%
34490
85%
**56
97%
Maxam CSB 1
<<locked>>
65%
33127
82%
**3
100%
Ramshot Enforcer
<<locked>>
76%
36463
90%
**02
96%
ReloadSwiss RS 14
<<locked>>
92%
21451
53%
**9
100%
ReloadSwiss RS 20
<<locked>>
65%
36158
89%
**5
100%
ReloadSwiss RS 24
<<locked>>
63%
33837
83%
**24
100%
[ReloadSwiss RS 30]*
<<locked>>
95%
29631
73%
**47
89%
Rottweil P 806
<<locked>>
66%
35375
87%
**20
100%
SNPE Vectan A0
<<locked>>
66%
34490
85%
**6
100%
SNPE Vectan BA6 1/2
<<locked>>
97%
30110
74%
**24
96%
SNPE Vectan BA7 1/2
<<locked>>
69%
33330
82%
**8
100%
Shooters World Heavy Pistol
<<locked>>
65%
34490
85%
**56
97%
[Somchem S265]*
<<locked>>
92%
36201
89%
**63
88%
Vihtavuori 3N38
<<locked>>
71%
33315
82%
**07
100%
Vihtavuori N105
<<locked>>
78%
35346
87%
**47
100%
Vihtavuori N110
<<locked>>
95%
36289
89%
**15
96%
Vihtavuori N32C Tin Star
<<locked>>
82%
35868
88%
**1
100%
Vihtavuori N350
<<locked>>
65%
34055
84%
**8
100%
[Winchester 296]*
<<locked>>
83%
33721
83%
**02
85%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
23308
57%
**6
100%
ADI APS 450
<<locked>>
61%
32634
80%
**8
100%
[Accurate 4100]*
<<locked>>
62%
20233
50%
**6
82%
[Accurate No. 11 FS]*
<<locked>>
82%
29109
72%
**10
81%
Accurate No. 9
<<locked>>
61%
28906
71%
**4
94%
Accurate TCM
<<locked>>
62%
29588
73%
**8
96%
[Alliant 2400]*
<<locked>>
61%
23018
57%
**9
88%
Alliant BLUE DOT
<<locked>>
62%
22931
56%
**6
95%
[Hodgdon H110]*
<<locked>>
70%
22785
56%
**5
81%
[Hodgdon LilGun]*
<<locked>>
61%
15534
38%
**7
80%
Hodgdon TrailBoss
<<locked>>
86%
20204
50%
**9
100%
Lovex D037.2
<<locked>>
61%
28906
71%
**4
94%
Maxam CSB 1
<<locked>>
60%
29544
73%
**0
100%
[Ramshot Enforcer]*
<<locked>>
61%
21872
54%
**2
88%
ReloadSwiss RS 14
<<locked>>
85%
18855
46%
**6
100%
ReloadSwiss RS 20
<<locked>>
61%
32634
80%
**2
100%
ReloadSwiss RS 24
<<locked>>
61%
30922
76%
**1
100%
[ReloadSwiss RS 30]*
<<locked>>
83%
21596
53%
**5
82%
Rottweil P 806
<<locked>>
61%
29965
74%
**5
100%
SNPE Vectan A0
<<locked>>
62%
30850
76%
**3
100%
[SNPE Vectan BA6 1/2]*
<<locked>>
65%
13111
32%
**2
80%
SNPE Vectan BA7 1/2
<<locked>>
61%
27383
67%
**6
100%
Shooters World Heavy Pistol
<<locked>>
61%
28906
71%
**4
94%
[Somchem S265]*
<<locked>>
78%
24845
61%
**9
81%
Vihtavuori 3N38
<<locked>>
62%
25019
62%
**6
99%
Vihtavuori N105
<<locked>>
61%
20914
52%
**3
99%
[Vihtavuori N110]*
<<locked>>
67%
16172
40%
**0
82%
Vihtavuori N32C Tin Star
<<locked>>
61%
22902
56%
**9
100%
Vihtavuori N350
<<locked>>
62%
30487
75%
**2
100%
[Winchester 296]*
<<locked>>
75%
26600
65%
**10
80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page