Load data for .30 PICRA + .308 | 190gr | Hornady BTSP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 190gr \| Hornady BTSP
Manufacturer SKU:	3085
Bullet Weight:	190gr \| 12.3g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B2702_C311
Last updated:	2026-01-20
Recommended Twist Rate:	1:10 - 1:8

Load data for 48 loads in caliber .30 PICRA with .308 | 190gr | Hornady BTSP bullet and 24 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	35331	87%	**63	100%
Accurate 4100	<<locked>>	75%	36187	89%	**61	93%
[Accurate No. 11 FS]*	<<locked>>	84%	35404	87%	**68	86%
Accurate No. 9	<<locked>>	64%	35998	89%	**45	98%
Accurate Solo 1250	<<locked>>	63%	36114	89%	**8	100%
Accurate TCM	<<locked>>	64%	35824	88%	**38	98%
Alliant 2400	<<locked>>	72%	35868	88%	**58	96%
Alliant BLUE DOT	<<locked>>	74%	36158	89%	**35	100%
Hodgdon H110	<<locked>>	79%	35476	87%	**84	90%
Hodgdon LilGun	<<locked>>	81%	35737	88%	**17	96%
Lovex D037.2	<<locked>>	63%	35998	89%	**45	98%
Maxam CSB 1	<<locked>>	66%	36085	89%	**5	100%
Ramshot Enforcer	<<locked>>	72%	35984	89%	**71	97%
ReloadSwiss RS 30	<<locked>>	97%	36172	89%	**17	94%
SNPE Vectan A0	<<locked>>	64%	34940	86%	**5	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	33750	83%	**35	98%
SNPE Vectan BA7 1/2	<<locked>>	68%	35447	87%	**27	100%
Shooters World Heavy Pistol	<<locked>>	63%	35998	89%	**45	98%
[Somchem S265]*	<<locked>>	87%	35592	88%	**35	89%
Vihtavuori 3N38	<<locked>>	70%	35766	88%	**99	100%
Vihtavuori N105	<<locked>>	73%	35070	86%	**12	100%
Vihtavuori N110	<<locked>>	89%	35447	87%	**81	96%
Vihtavuori N350	<<locked>>	64%	35244	87%	**24	100%
[Winchester 296]*	<<locked>>	79%	35679	88%	**07	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	25309	62%	**8	100%
[Accurate 4100]*	<<locked>>	61%	22234	55%	**8	85%
[Accurate No. 11 FS]*	<<locked>>	74%	26005	64%	**33	80%
Accurate No. 9	<<locked>>	61%	32474	80%	**99	97%
Accurate Solo 1250	<<locked>>	61%	34447	85%	**2	100%
Accurate TCM	<<locked>>	61%	32039	79%	**89	97%
Alliant 2400	<<locked>>	61%	25962	64%	**24	91%
Alliant BLUE DOT	<<locked>>	61%	24743	61%	**4	96%
[Hodgdon H110]*	<<locked>>	63%	21016	52%	**1	80%
[Hodgdon LilGun]*	<<locked>>	61%	18014	44%	**2	84%
Lovex D037.2	<<locked>>	61%	33562	83%	**12	97%
Maxam CSB 1	<<locked>>	64%	34447	85%	**8	100%
Ramshot Enforcer	<<locked>>	61%	25237	62%	**14	92%
[ReloadSwiss RS 30]*	<<locked>>	75%	19696	48%	**8	80%
SNPE Vectan A0	<<locked>>	61%	31894	79%	**5	100%
SNPE Vectan BA6 1/2	<<locked>>	76%	20204	50%	**8	90%
SNPE Vectan BA7 1/2	<<locked>>	60%	28834	71%	**5	100%
Shooters World Heavy Pistol	<<locked>>	61%	33562	83%	**12	97%
[Somchem S265]*	<<locked>>	70%	22684	56%	**5	81%
Vihtavuori 3N38	<<locked>>	61%	27093	67%	**7	100%
Vihtavuori N105	<<locked>>	61%	23728	58%	**1	100%
[Vihtavuori N110]*	<<locked>>	69%	19624	48%	**5	87%
Vihtavuori N350	<<locked>>	61%	32271	79%	**4	100%
[Winchester 296]*	<<locked>>	69%	25498	63%	**53	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data