Load data for .30 PICRA + .308 | 190gr | AERO SUB,- smax:23.90

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 190gr \| AERO SUB,- smax:23.90
Bullet Weight:	190gr \| 12.3g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.591" \| 40.4mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.710" \| 18.0mm
Shank Seated Depth:	0.710" \| 18.0mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B71_C311
Last updated:	2026-01-20

Load data for 56 loads in caliber .30 PICRA with .308 | 190gr | AERO SUB,- smax:23.90 bullet and 28 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	82%	35012	86%	**7	100%
[Accurate 4100]*	<<locked>>	85%	34882	86%	**70	89%
[Accurate No. 11 FS]*	<<locked>>	95%	35926	88%	**83	82%
Accurate No. 7	<<locked>>	64%	35114	86%	**56	99%
Accurate No. 9	<<locked>>	73%	35389	87%	**63	95%
Accurate TCM	<<locked>>	73%	36230	89%	**63	96%
Alliant 2400	<<locked>>	83%	36114	89%	**86	93%
Alliant BLUE DOT	<<locked>>	85%	36477	90%	**66	98%
Alliant POWER PISTOL	<<locked>>	68%	35433	87%	**33	100%
Alliant UNIQUE	<<locked>>	69%	36361	90%	**5	100%
[Hodgdon H110]*	<<locked>>	92%	35505	87%	**12	87%
Hodgdon LilGun	<<locked>>	95%	36187	89%	**55	94%
Lovex D037.1	<<locked>>	64%	35114	86%	**56	99%
Lovex D037.2	<<locked>>	72%	35389	87%	**63	95%
Ramshot Enforcer	<<locked>>	83%	35926	88%	**99	94%
ReloadSwiss RS 24	<<locked>>	70%	35520	87%	**43	100%
Rottweil P 806	<<locked>>	74%	36535	90%	**47	100%
SNPE Vectan BA7 1/2	<<locked>>	76%	34998	86%	**8	100%
SNPE Vectan SP 2	<<locked>>	63%	35621	88%	**27	100%
Shooters World Heavy Pistol	<<locked>>	72%	35389	87%	**63	95%
Shooters World Major Pistol	<<locked>>	64%	35114	86%	**56	99%
[Somchem S265]*	<<locked>>	96%	32532	80%	**14	83%
Vihtavuori 3N37	<<locked>>	70%	36114	89%	**4	100%
Vihtavuori 3N38	<<locked>>	79%	35027	86%	**30	100%
Vihtavuori N105	<<locked>>	85%	34780	86%	**50	100%
Vihtavuori N110	<<locked>>	96%	29312	72%	**33	91%
Vihtavuori N350	<<locked>>	72%	34998	86%	**5	100%
[Winchester 296]*	<<locked>>	92%	35346	87%	**29	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	27833	69%	**9	100%
[Accurate 4100]*	<<locked>>	73%	23569	58%	**5	82%
[Accurate No. 11 FS]*	<<locked>>	92%	32547	80%	**43	80%
Accurate No. 7	<<locked>>	61%	31372	77%	**17	98%
Accurate No. 9	<<locked>>	62%	24874	61%	**2	90%
Accurate TCM	<<locked>>	63%	25309	62%	**2	91%
[Alliant 2400]*	<<locked>>	68%	23235	57%	**9	86%
Alliant BLUE DOT	<<locked>>	72%	25454	63%	**2	94%
Alliant POWER PISTOL	<<locked>>	60%	28021	69%	**5	100%
Alliant UNIQUE	<<locked>>	67%	34069	84%	**2	100%
[Hodgdon H110]*	<<locked>>	82%	25237	62%	**1	80%
[Hodgdon LilGun]*	<<locked>>	77%	20030	49%	**5	83%
Lovex D037.1	<<locked>>	61%	31372	77%	**17	98%
Lovex D037.2	<<locked>>	62%	24874	61%	**2	90%
[Ramshot Enforcer]*	<<locked>>	69%	22698	56%	**5	87%
ReloadSwiss RS 24	<<locked>>	62%	27079	67%	**5	98%
Rottweil P 806	<<locked>>	62%	24598	61%	**9	100%
SNPE Vectan BA7 1/2	<<locked>>	71%	31502	78%	**5	100%
SNPE Vectan SP 2	<<locked>>	61%	33634	83%	**10	100%
Shooters World Heavy Pistol	<<locked>>	62%	24874	61%	**2	90%
Shooters World Major Pistol	<<locked>>	61%	31372	77%	**17	98%
[Somchem S265]*	<<locked>>	90%	28239	70%	**5	80%
Vihtavuori 3N37	<<locked>>	64%	30110	74%	**2	100%
Vihtavuori 3N38	<<locked>>	70%	26513	65%	**2	98%
Vihtavuori N105	<<locked>>	73%	24091	59%	**5	100%
[Vihtavuori N110]*	<<locked>>	87%	22379	55%	**8	86%
Vihtavuori N350	<<locked>>	68%	30980	76%	**5	100%
[Winchester 296]*	<<locked>>	89%	32256	79%	**89	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data