top of page

Load data for .30 PICRA + .308 | 181gr | RWS UNI Classic

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): none

.30 PICRA + .308 | 181gr | RWS UNI Classic

Load Specifications

Bullet:
.308 | 181gr | RWS UNI Classic
Manufacturer SKU:
2145499
Bullet Weight:
181gr | 11.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.250" | 31.7mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.172" | 55.2mm
Seated Depth:
0.369" | 9.4mm
Shank Seated Depth:
0.235" | 6.0mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B5436_C311
Recommended Twist Rate:
1:11 - 1:10

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 36 loads in caliber .30 PICRA with .308 | 181gr | RWS UNI Classic bullet and 18 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
71%
35824
88%
**32
100%
Accurate 4100
<<locked>>
71%
36274
89%
**27
94%
[Accurate No. 11 FS]*
<<locked>>
80%
36085
89%
**43
88%
Alliant 2400
<<locked>>
68%
36376
90%
**30
96%
Hodgdon H110
<<locked>>
75%
34882
86%
**43
91%
Hodgdon LilGun
<<locked>>
76%
35839
88%
**73
97%
Hodgdon TrailBoss
<<locked>>
92%
24671
61%
**7
100%
Ramshot Enforcer
<<locked>>
68%
35694
88%
**34
97%
ReloadSwiss RS 14
<<locked>>
93%
24236
60%
**7
100%
ReloadSwiss RS 30
<<locked>>
91%
34766
86%
**60
94%
SNPE Vectan BA6 1/2
<<locked>>
93%
36027
89%
**27
99%
SNPE Vectan BA7 1/2
<<locked>>
65%
36027
89%
**93
100%
[Somchem S265]*
<<locked>>
82%
35041
86%
**94
89%
Vihtavuori 3N38
<<locked>>
68%
36463
90%
**78
100%
Vihtavuori N105
<<locked>>
70%
36521
90%
**81
100%
Vihtavuori N110
<<locked>>
84%
34983
86%
**30
96%
Vihtavuori N32C Tin Star
<<locked>>
78%
36361
90%
**2
100%
[Winchester 296]*
<<locked>>
74%
35346
87%
**60
87%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
60%
26934
66%
**24
100%
[Accurate 4100]*
<<locked>>
61%
25773
63%
**70
88%
[Accurate No. 11 FS]*
<<locked>>
70%
25686
63%
**86
81%
Alliant 2400
<<locked>>
61%
28660
71%
**19
93%
[Hodgdon H110]*
<<locked>>
61%
22452
55%
**30
82%
[Hodgdon LilGun]*
<<locked>>
61%
20740
51%
**33
88%
Hodgdon TrailBoss
<<locked>>
66%
15534
38%
**9
100%
Ramshot Enforcer
<<locked>>
61%
28253
70%
**25
94%
ReloadSwiss RS 14
<<locked>>
62%
14054
35%
**3
100%
[ReloadSwiss RS 30]*
<<locked>>
69%
18724
46%
**1
80%
[SNPE Vectan BA6 1/2]*
<<locked>>
61%
14649
36%
**0
84%
SNPE Vectan BA7 1/2
<<locked>>
61%
31299
77%
**40
100%
[Somchem S265]*
<<locked>>
67%
22669
56%
**7
81%
Vihtavuori 3N38
<<locked>>
61%
30110
74%
**96
100%
Vihtavuori N105
<<locked>>
61%
27340
67%
**70
100%
[Vihtavuori N110]*
<<locked>>
61%
17477
43%
**2
85%
Vihtavuori N32C Tin Star
<<locked>>
61%
25135
62%
**7
100%
[Winchester 296]*
<<locked>>
65%
25164
62%
**96
80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page