Load data for .30 PICRA + .308 | 180gr | Speer TBBC

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Speer TBBC
Manufacturer SKU:	1765
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6172_C311
Last updated:	2026-01-25

Load data for 50 loads in caliber .30 PICRA with .308 | 180gr | Speer TBBC bullet and 25 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	35868	88%	**19	100%
ADI APS 450	<<locked>>	62%	35230	87%	**9	100%
Accurate 4100	<<locked>>	74%	36100	89%	**07	93%
[Accurate No. 11 FS]*	<<locked>>	83%	36347	90%	**20	86%
Accurate Solo 1250	<<locked>>	63%	36434	90%	**4	100%
Accurate TCM	<<locked>>	63%	36158	89%	**88	98%
Alliant 2400	<<locked>>	70%	35375	87%	**94	95%
Alliant BLUE DOT	<<locked>>	73%	35766	88%	**75	99%
Alliant Herco	<<locked>>	72%	36187	89%	**47	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	35273	87%	**1	100%
Hodgdon H110	<<locked>>	78%	35955	89%	**34	90%
Hodgdon LilGun	<<locked>>	80%	36303	89%	**70	96%
Maxam CSB 1	<<locked>>	65%	36332	89%	**1	100%
Ramshot Enforcer	<<locked>>	70%	35969	89%	**14	96%
ReloadSwiss RS 30	<<locked>>	95%	35998	89%	**63	93%
SNPE Vectan A0	<<locked>>	65%	36376	90%	**27	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	35737	88%	**01	98%
SNPE Vectan BA7 1/2	<<locked>>	67%	36100	89%	**76	100%
[Somchem S265]*	<<locked>>	86%	36129	89%	**84	89%
Vihtavuori 3N38	<<locked>>	69%	35795	88%	**52	100%
Vihtavuori N105	<<locked>>	72%	35375	87%	**55	100%
Vihtavuori N110	<<locked>>	87%	35694	88%	**24	96%
Vihtavuori N32C Tin Star	<<locked>>	79%	36013	89%	**6	100%
Vihtavuori N350	<<locked>>	64%	36303	89%	**76	100%
[Winchester 296]*	<<locked>>	78%	36245	89%	**60	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26440	65%	**01	100%
ADI APS 450	<<locked>>	61%	33736	83%	**2	100%
[Accurate 4100]*	<<locked>>	61%	23830	59%	**20	86%
[Accurate No. 11 FS]*	<<locked>>	74%	26963	66%	**83	80%
Accurate Solo 1250	<<locked>>	61%	35012	86%	**1	100%
Accurate TCM	<<locked>>	61%	33968	84%	**55	98%
Alliant 2400	<<locked>>	61%	27166	67%	**79	91%
Alliant BLUE DOT	<<locked>>	61%	25454	63%	**24	96%
Alliant Herco	<<locked>>	61%	27833	69%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	25556	63%	**0	100%
[Hodgdon H110]*	<<locked>>	63%	21567	53%	**04	80%
[Hodgdon LilGun]*	<<locked>>	61%	18884	46%	**1	85%
Maxam CSB 1	<<locked>>	62%	33286	82%	**1	100%
Ramshot Enforcer	<<locked>>	61%	26266	65%	**66	92%
[ReloadSwiss RS 30]*	<<locked>>	74%	20291	50%	**1	80%
SNPE Vectan A0	<<locked>>	62%	33605	83%	**7	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	14620	36%	**3	83%
SNPE Vectan BA7 1/2	<<locked>>	61%	29994	74%	**10	100%
[Somchem S265]*	<<locked>>	70%	23163	57%	**8	80%
Vihtavuori 3N38	<<locked>>	61%	27731	68%	**47	100%
Vihtavuori N105	<<locked>>	61%	24758	61%	**20	100%
[Vihtavuori N110]*	<<locked>>	61%	16114	40%	**6	82%
Vihtavuori N32C Tin Star	<<locked>>	67%	28413	70%	**7	100%
Vihtavuori N350	<<locked>>	61%	33446	82%	**50	100%
[Winchester 296]*	<<locked>>	69%	26760	66%	**09	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data