Load data for .30 PICRA + .308 | 180gr | Rhino Solid Shank

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Rhino Solid Shank
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5237_C311
Last updated:	2026-02-02

Load data for 44 loads in caliber .30 PICRA with .308 | 180gr | Rhino Solid Shank bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35824	88%	**29	100%
ADI APS 450	<<locked>>	63%	36289	89%	**2	100%
Accurate 4100	<<locked>>	72%	35694	88%	**20	94%
[Accurate No. 11 FS]*	<<locked>>	81%	36550	90%	**37	87%
Alliant 2400	<<locked>>	69%	36521	90%	**24	96%
Alliant BLUE DOT	<<locked>>	72%	36521	90%	**01	100%
Alliant Herco	<<locked>>	71%	36405	90%	**63	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	73%	35462	87%	**1	100%
Hodgdon H110	<<locked>>	77%	36216	89%	**50	91%
Hodgdon LilGun	<<locked>>	77%	35955	89%	**76	97%
Maxam CSB 1	<<locked>>	63%	35665	88%	**7	100%
Ramshot Enforcer	<<locked>>	69%	35810	88%	**20	97%
ReloadSwiss RS 14	<<locked>>	96%	24947	61%	**3	100%
ReloadSwiss RS 30	<<locked>>	93%	36477	90%	**76	94%
SNPE Vectan BA6 1/2	<<locked>>	95%	36245	89%	**27	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35897	88%	**89	100%
[Somchem S265]*	<<locked>>	85%	36376	90%	**07	89%
Vihtavuori 3N38	<<locked>>	68%	36506	90%	**71	100%
Vihtavuori N105	<<locked>>	70%	35288	87%	**68	100%
Vihtavuori N110	<<locked>>	86%	36506	90%	**47	97%
Vihtavuori N32C Tin Star	<<locked>>	79%	36390	90%	**5	100%
[Winchester 296]*	<<locked>>	76%	35563	88%	**63	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26963	66%	**17	100%
ADI APS 450	<<locked>>	61%	34824	86%	**5	100%
[Accurate 4100]*	<<locked>>	61%	25121	62%	**53	87%
[Accurate No. 11 FS]*	<<locked>>	71%	25831	64%	**79	80%
Alliant 2400	<<locked>>	61%	27731	68%	**96	92%
Alliant BLUE DOT	<<locked>>	61%	26527	65%	**53	97%
Alliant Herco	<<locked>>	61%	28282	70%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	26266	65%	**9	100%
[Hodgdon H110]*	<<locked>>	61%	21959	54%	**17	81%
[Hodgdon LilGun]*	<<locked>>	61%	19899	49%	**10	86%
Maxam CSB 1	<<locked>>	62%	34330	85%	**4	100%
Ramshot Enforcer	<<locked>>	61%	27470	68%	**06	93%
ReloadSwiss RS 14	<<locked>>	93%	23989	59%	**0	100%
[ReloadSwiss RS 30]*	<<locked>>	71%	19290	48%	**4	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14649	36%	**3	84%
SNPE Vectan BA7 1/2	<<locked>>	61%	31328	77%	**37	100%
[Somchem S265]*	<<locked>>	67%	22104	54%	**1	80%
Vihtavuori 3N38	<<locked>>	61%	28935	71%	**73	100%
Vihtavuori N105	<<locked>>	61%	26252	65%	**56	100%
[Vihtavuori N110]*	<<locked>>	61%	17361	43%	**5	84%
Vihtavuori N32C Tin Star	<<locked>>	64%	26890	66%	**3	100%
[Winchester 296]*	<<locked>>	66%	25947	64%	**02	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data