Load data for .30 PICRA + .308 | 180gr | Nosler Partition PP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Nosler Partition PP
Manufacturer SKU:	25396
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.180" \| 30.0mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.299" \| 7.6mm
Shank Seated Depth:	0.299" \| 7.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4113_C311
Last updated:	2025-01-01

Load data for 42 loads in caliber .30 PICRA with .308 | 180gr | Nosler Partition PP bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	36187	89%	**32	100%
Accurate 4100	<<locked>>	71%	35621	88%	**20	93%
[Accurate No. 11 FS]*	<<locked>>	80%	35781	88%	**30	87%
Alliant 2400	<<locked>>	68%	35969	89%	**24	96%
Alliant BLUE DOT	<<locked>>	70%	34548	85%	**75	99%
Hodgdon H110	<<locked>>	76%	36434	90%	**60	91%
Hodgdon LilGun	<<locked>>	76%	35157	87%	**66	96%
Hodgdon TrailBoss	<<locked>>	93%	24961	61%	**0	100%
Maxam CSB 1	<<locked>>	64%	36332	89%	**07	100%
Ramshot Enforcer	<<locked>>	68%	35157	87%	**14	97%
ReloadSwiss RS 14	<<locked>>	97%	25498	63%	**0	100%
ReloadSwiss RS 30	<<locked>>	92%	35331	87%	**66	93%
SNPE Vectan A0	<<locked>>	63%	36100	89%	**40	100%
SNPE Vectan BA6 1/2	<<locked>>	92%	34258	84%	**01	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	36405	90%	**93	100%
[Somchem S265]*	<<locked>>	82%	34519	85%	**84	89%
Vihtavuori 3N38	<<locked>>	67%	35868	88%	**68	100%
Vihtavuori N105	<<locked>>	70%	35766	88%	**78	100%
Vihtavuori N110	<<locked>>	84%	34447	85%	**24	96%
Vihtavuori N32C Tin Star	<<locked>>	76%	34418	85%	**6	100%
[Winchester 296]*	<<locked>>	75%	34766	86%	**53	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27325	67%	**24	100%
[Accurate 4100]*	<<locked>>	61%	25266	62%	**60	87%
[Accurate No. 11 FS]*	<<locked>>	71%	26977	66%	**99	81%
Alliant 2400	<<locked>>	61%	28007	69%	**06	92%
Alliant BLUE DOT	<<locked>>	61%	26687	66%	**63	97%
[Hodgdon H110]*	<<locked>>	61%	22017	54%	**20	81%
[Hodgdon LilGun]*	<<locked>>	61%	20204	50%	**20	87%
Hodgdon TrailBoss	<<locked>>	67%	15693	39%	**2	100%
Maxam CSB 1	<<locked>>	61%	33736	83%	**8	100%
Ramshot Enforcer	<<locked>>	61%	27673	68%	**02	93%
ReloadSwiss RS 14	<<locked>>	60%	13460	33%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	72%	20030	49%	**1	81%
SNPE Vectan A0	<<locked>>	60%	33620	83%	**14	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14736	36%	**3	84%
SNPE Vectan BA7 1/2	<<locked>>	61%	31749	78%	**43	100%
[Somchem S265]*	<<locked>>	67%	22365	55%	**1	81%
Vihtavuori 3N38	<<locked>>	61%	29269	72%	**79	100%
Vihtavuori N105	<<locked>>	61%	26716	66%	**63	100%
[Vihtavuori N110]*	<<locked>>	60%	17100	42%	**9	84%
Vihtavuori N32C Tin Star	<<locked>>	61%	25469	63%	**7	100%
[Winchester 296]*	<<locked>>	66%	26121	64%	**15	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data