Load data for .30 PICRA + .308 | 180gr | Norma Semi Soft Point

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Norma Semi Soft Point
Manufacturer SKU:	67625
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3871_C311
Last updated:	2026-03-24
Recommended Twist Rate:	1:12 - 1:10

Load data for 42 loads in caliber .30 PICRA with .308 | 180gr | Norma Semi Soft Point bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35462	87%	**32	100%
ADI APS 450	<<locked>>	63%	36303	89%	**5	100%
Accurate 4100	<<locked>>	71%	35955	89%	**24	94%
[Accurate No. 11 FS]*	<<locked>>	80%	35708	88%	**40	87%
Alliant 2400	<<locked>>	68%	36085	89%	**27	96%
Alliant BLUE DOT	<<locked>>	71%	35955	89%	**98	100%
Alliant Herco	<<locked>>	71%	36100	89%	**66	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	36506	90%	**4	100%
Hodgdon H110	<<locked>>	76%	36347	90%	**57	91%
Hodgdon LilGun	<<locked>>	77%	36303	89%	**86	97%
Ramshot Enforcer	<<locked>>	68%	36477	90%	**43	97%
ReloadSwiss RS 14	<<locked>>	95%	25092	62%	**0	100%
ReloadSwiss RS 30	<<locked>>	92%	36463	90%	**86	94%
SNPE Vectan BA6 1/2	<<locked>>	94%	36448	90%	**30	98%
SNPE Vectan BA7 1/2	<<locked>>	65%	35694	88%	**93	100%
Somchem S265	<<locked>>	83%	35520	87%	**07	90%
Vihtavuori 3N38	<<locked>>	67%	36245	89%	**78	100%
Vihtavuori N105	<<locked>>	70%	36216	89%	**81	100%
Vihtavuori N110	<<locked>>	85%	36013	89%	**43	97%
Vihtavuori N32C Tin Star	<<locked>>	78%	36245	89%	**8	100%
[Winchester 296]*	<<locked>>	75%	35781	88%	**73	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	27804	68%	**33	100%
ADI APS 450	<<locked>>	61%	34940	86%	**2	100%
[Accurate 4100]*	<<locked>>	61%	25382	63%	**73	88%
[Accurate No. 11 FS]*	<<locked>>	69%	25440	63%	**83	80%
Alliant 2400	<<locked>>	61%	28282	70%	**15	93%
Alliant BLUE DOT	<<locked>>	61%	27108	67%	**66	98%
Alliant Herco	<<locked>>	61%	28384	70%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	60%	26237	65%	**6	100%
[Hodgdon H110]*	<<locked>>	61%	22220	55%	**27	81%
[Hodgdon LilGun]*	<<locked>>	61%	21147	52%	**37	88%
Ramshot Enforcer	<<locked>>	61%	28007	69%	**12	93%
ReloadSwiss RS 14	<<locked>>	90%	23163	57%	**0	100%
[ReloadSwiss RS 30]*	<<locked>>	69%	19174	47%	**8	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14997	37%	**0	84%
SNPE Vectan BA7 1/2	<<locked>>	62%	32169	79%	**53	100%
[Somchem S265]*	<<locked>>	66%	21799	54%	**4	80%
Vihtavuori 3N38	<<locked>>	61%	29733	73%	**93	100%
Vihtavuori N105	<<locked>>	61%	27311	67%	**70	100%
[Vihtavuori N110]*	<<locked>>	61%	17318	43%	**8	84%
Vihtavuori N32C Tin Star	<<locked>>	64%	27093	67%	**0	100%
[Winchester 296]*	<<locked>>	64%	25077	62%	**93	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data