Load data for .30 PICRA + .308 | 180gr | Hornady SP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Hornady SP
Manufacturer SKU:	3070
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.240" \| 31.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.359" \| 9.1mm
Shank Seated Depth:	0.359" \| 9.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B2699_C311
Last updated:	2025-01-01

Load data for 46 loads in caliber .30 PICRA with .308 | 180gr | Hornady SP bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35520	87%	**19	100%
Accurate 4100	<<locked>>	72%	34824	86%	**01	93%
[Accurate No. 11 FS]*	<<locked>>	82%	35273	87%	**14	86%
Accurate TCM	<<locked>>	63%	36535	90%	**98	98%
Alliant 2400	<<locked>>	69%	34548	85%	**98	95%
Alliant BLUE DOT	<<locked>>	73%	36434	90%	**91	100%
Hodgdon H110	<<locked>>	77%	34809	86%	**24	90%
Hodgdon LilGun	<<locked>>	79%	36463	90%	**73	96%
Hodgdon TrailBoss	<<locked>>	94%	24439	60%	**4	100%
Maxam CSB 1	<<locked>>	65%	36114	89%	**7	100%
Ramshot Enforcer	<<locked>>	70%	36274	89%	**27	97%
ReloadSwiss RS 14	<<locked>>	95%	24134	59%	**3	100%
ReloadSwiss RS 30	<<locked>>	94%	35070	86%	**50	93%
SNPE Vectan A0	<<locked>>	64%	36361	90%	**30	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	35766	88%	**07	98%
SNPE Vectan BA7 1/2	<<locked>>	67%	35766	88%	**76	100%
[Somchem S265]*	<<locked>>	86%	35984	89%	**98	89%
Vihtavuori 3N38	<<locked>>	68%	35331	87%	**52	100%
Vihtavuori N105	<<locked>>	71%	34896	86%	**55	100%
Vihtavuori N110	<<locked>>	86%	34461	85%	**14	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	34577	85%	**6	100%
Vihtavuori N350	<<locked>>	63%	36085	89%	**86	100%
[Winchester 296]*	<<locked>>	77%	35128	86%	**47	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26136	64%	**01	100%
[Accurate 4100]*	<<locked>>	61%	24033	59%	**37	86%
[Accurate No. 11 FS]*	<<locked>>	72%	26339	65%	**79	80%
Accurate TCM	<<locked>>	61%	34243	84%	**71	98%
Alliant 2400	<<locked>>	61%	26861	66%	**79	91%
Alliant BLUE DOT	<<locked>>	61%	26005	64%	**37	97%
[Hodgdon H110]*	<<locked>>	62%	21611	53%	**07	80%
[Hodgdon LilGun]*	<<locked>>	61%	19116	47%	**1	85%
Hodgdon TrailBoss	<<locked>>	65%	14982	37%	**3	100%
Maxam CSB 1	<<locked>>	61%	33359	82%	**5	100%
Ramshot Enforcer	<<locked>>	61%	26556	65%	**86	92%
ReloadSwiss RS 14	<<locked>>	67%	14997	37%	**6	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	20378	50%	**4	81%
SNPE Vectan A0	<<locked>>	61%	33562	83%	**04	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	13866	34%	**3	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	30821	76%	**27	100%
[Somchem S265]*	<<locked>>	69%	22713	56%	**8	80%
Vihtavuori 3N38	<<locked>>	61%	28340	70%	**60	100%
Vihtavuori N105	<<locked>>	61%	25614	63%	**40	100%
[Vihtavuori N110]*	<<locked>>	61%	16418	40%	**9	83%
Vihtavuori N32C Tin Star	<<locked>>	61%	25005	62%	**4	100%
Vihtavuori N350	<<locked>>	60%	33127	82%	**53	100%
[Winchester 296]*	<<locked>>	68%	26092	64%	**02	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.