Load data for .30 PICRA + .308 | 180gr | Hornady InterLock RN

Recommended Powder(s): SNPE Vectan BA6 1/2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Hornady InterLock RN
Manufacturer SKU:	3075
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.068" \| 27.1mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.095" \| 53.2mm
Seated Depth:	0.264" \| 6.7mm
Shank Seated Depth:	0.264" \| 6.7mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B2698_C311
Last updated:	2025-01-01

Load data for 38 loads in caliber .30 PICRA with .308 | 180gr | Hornady InterLock RN bullet and 19 powders such as SNPE Vectan BA6 1/2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35795	88%	**35	100%
Accurate 4100	<<locked>>	71%	35839	88%	**20	94%
[Accurate No. 11 FS]*	<<locked>>	79%	35665	88%	**34	87%
Alliant 2400	<<locked>>	67%	35128	87%	**17	96%
Alliant BLUE DOT	<<locked>>	69%	35317	87%	**94	100%
Hodgdon H110	<<locked>>	75%	36492	90%	**63	91%
Hodgdon LilGun	<<locked>>	76%	36332	89%	**83	97%
Hodgdon TrailBoss	<<locked>>	93%	24947	61%	**3	100%
Ramshot Enforcer	<<locked>>	66%	34534	85%	**07	96%
ReloadSwiss RS 14	<<locked>>	96%	25599	63%	**6	100%
ReloadSwiss RS 30	<<locked>>	91%	35331	87%	**73	94%
SNPE Vectan BA6 1/2 👍	<<locked>>	93%	36506	90%	**37	99%
SNPE Vectan BA7 1/2	<<locked>>	65%	36042	89%	**96	100%
Somchem S265	<<locked>>	83%	36492	90%	**14	90%
Vihtavuori 3N38	<<locked>>	65%	34229	84%	**52	100%
Vihtavuori N105	<<locked>>	70%	36477	90%	**88	100%
Vihtavuori N110	<<locked>>	84%	35955	89%	**40	97%
Vihtavuori N32C Tin Star	<<locked>>	75%	34200	84%	**2	100%
[Winchester 296]*	<<locked>>	74%	34925	86%	**60	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	27253	67%	**30	100%
[Accurate 4100]*	<<locked>>	61%	25498	63%	**66	88%
[Accurate No. 11 FS]*	<<locked>>	69%	25556	63%	**83	81%
Alliant 2400	<<locked>>	61%	29385	72%	**35	93%
Alliant BLUE DOT	<<locked>>	61%	27383	67%	**76	98%
[Hodgdon H110]*	<<locked>>	61%	22408	55%	**27	82%
[Hodgdon LilGun]*	<<locked>>	61%	21263	52%	**37	88%
Hodgdon TrailBoss	<<locked>>	62%	14388	35%	**3	100%
Ramshot Enforcer	<<locked>>	61%	29008	71%	**29	94%
ReloadSwiss RS 14	<<locked>>	61%	13721	34%	**6	100%
[ReloadSwiss RS 30]*	<<locked>>	69%	19160	47%	**8	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	15156	37%	**3	85%
SNPE Vectan BA7 1/2	<<locked>>	60%	31546	78%	**47	100%
[Somchem S265]*	<<locked>>	66%	22669	56%	**01	81%
Vihtavuori 3N38	<<locked>>	61%	30052	74%	**93	100%
Vihtavuori N105	<<locked>>	61%	27717	68%	**73	100%
[Vihtavuori N110]*	<<locked>>	62%	18217	45%	**5	85%
Vihtavuori N32C Tin Star	<<locked>>	61%	25498	63%	**4	100%
[Winchester 296]*	<<locked>>	64%	25063	62%	**99	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data