Load data for .30 PICRA + .308 | 176gr | Hornady A-TIP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 176gr \| Hornady A-TIP
Manufacturer SKU:	30717
Bullet Weight:	176gr \| 11.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B2691_C311
Last updated:	2026-01-31
Recommended Twist Rate:	1:10 - 1:8

Load data for 74 loads in caliber .30 PICRA with .308 | 176gr | Hornady A-TIP bullet and 37 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	76%	36114	89%	**22	100%
ADI APS 350	<<locked>>	63%	35288	87%	**9	100%
ADI APS 450	<<locked>>	64%	35230	87%	**6	100%
ADI AS 30	<<locked>>	62%	35360	87%	**2	100%
Accurate 4100	<<locked>>	77%	36042	89%	**07	92%
[Accurate No. 11 FS]*	<<locked>>	86%	35969	89%	**14	85%
Accurate No. 9	<<locked>>	66%	36056	89%	**98	97%
Accurate Solo 1250	<<locked>>	64%	36361	90%	**4	100%
Accurate TCM	<<locked>>	65%	35955	89%	**84	98%
Alliant 2400	<<locked>>	73%	35926	88%	**11	95%
Alliant BE-86	<<locked>>	63%	36448	90%	**8	100%
Alliant BLUE DOT 👍	<<locked>>	76%	36405	90%	**84	99%
Alliant Herco	<<locked>>	75%	36434	90%	**56	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	77%	35882	88%	**8	100%
Hodgdon Clays	<<locked>>	63%	36158	89%	**9	100%
[Hodgdon H110]*	<<locked>>	82%	35998	89%	**37	89%
Hodgdon LilGun	<<locked>>	83%	36347	89%	**73	95%
Lovex D037.2	<<locked>>	65%	36056	89%	**98	97%
Maxam CSB 1	<<locked>>	67%	36216	89%	**1	100%
Maxam CSB 3	<<locked>>	63%	36129	89%	**1	100%
Ramshot Enforcer	<<locked>>	73%	35505	87%	**07	95%
ReloadSwiss RS 20	<<locked>>	64%	36492	90%	**43	100%
ReloadSwiss RS 24	<<locked>>	63%	35534	88%	**58	100%
ReloadSwiss RS 30	<<locked>>	96%	33228	82%	**24	91%
Rottweil P 806	<<locked>>	64%	35766	88%	**38	100%
SNPE Vectan A0	<<locked>>	67%	36419	90%	**27	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	32314	80%	**65	96%
SNPE Vectan BA7 1/2	<<locked>>	70%	36390	90%	**79	100%
Shooters World Heavy Pistol	<<locked>>	65%	36056	89%	**98	97%
Somchem MS200	<<locked>>	62%	35984	89%	**27	100%
[Somchem S265]*	<<locked>>	90%	36477	90%	**91	88%
Vihtavuori 3N38	<<locked>>	72%	36245	89%	**55	100%
Vihtavuori N105	<<locked>>	75%	35520	87%	**65	100%
Vihtavuori N110	<<locked>>	92%	36405	90%	**34	95%
Vihtavuori N32C Tin Star	<<locked>>	82%	36303	89%	**6	100%
Vihtavuori N350	<<locked>>	66%	36289	89%	**83	100%
[Winchester 296]*	<<locked>>	82%	36071	89%	**60	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	23946	59%	**1	100%
ADI APS 350	<<locked>>	60%	33605	83%	**6	100%
ADI APS 450	<<locked>>	62%	33678	83%	**9	100%
ADI AS 30	<<locked>>	60%	33736	83%	**9	100%
[Accurate 4100]*	<<locked>>	61%	21567	53%	**4	83%
[Accurate No. 11 FS]*	<<locked>>	79%	28500	70%	**09	80%
Accurate No. 9	<<locked>>	61%	30429	75%	**19	95%
Accurate Solo 1250	<<locked>>	61%	33025	81%	**1	100%
Accurate TCM	<<locked>>	61%	31328	77%	**22	96%
[Alliant 2400]*	<<locked>>	61%	24453	60%	**33	88%
Alliant BE-86	<<locked>>	60%	33692	83%	**1	100%
Alliant BLUE DOT	<<locked>>	60%	23366	58%	**4	95%
Alliant Herco	<<locked>>	61%	26208	65%	**5	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	60%	24062	59%	**3	100%
Hodgdon Clays	<<locked>>	60%	34389	85%	**9	100%
[Hodgdon H110]*	<<locked>>	68%	22785	56%	**30	80%
[Hodgdon LilGun]*	<<locked>>	61%	16650	41%	**5	80%
Lovex D037.2	<<locked>>	61%	31473	77%	**35	95%
Maxam CSB 1	<<locked>>	61%	31546	78%	**2	100%
Maxam CSB 3	<<locked>>	61%	34360	85%	**8	100%
[Ramshot Enforcer]*	<<locked>>	61%	23409	58%	**27	89%
ReloadSwiss RS 20	<<locked>>	61%	33417	82%	**07	100%
ReloadSwiss RS 24	<<locked>>	61%	32953	81%	**32	100%
[ReloadSwiss RS 30]*	<<locked>>	79%	21045	52%	**04	80%
Rottweil P 806	<<locked>>	61%	32111	79%	**96	100%
SNPE Vectan A0	<<locked>>	62%	32068	79%	**1	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	14286	35%	**0	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	28616	70%	**4	100%
Shooters World Heavy Pistol	<<locked>>	61%	31473	77%	**35	95%
Somchem MS200	<<locked>>	61%	34563	85%	**10	100%
[Somchem S265]*	<<locked>>	76%	25164	62%	**27	81%
Vihtavuori 3N38	<<locked>>	60%	25396	63%	**14	98%
Vihtavuori N105	<<locked>>	62%	23061	57%	**04	100%
[Vihtavuori N110]*	<<locked>>	64%	16128	40%	**6	81%
Vihtavuori N32C Tin Star	<<locked>>	69%	28123	69%	**3	100%
Vihtavuori N350	<<locked>>	62%	31952	79%	**37	100%
[Winchester 296]*	<<locked>>	74%	27905	69%	**32	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data