Load data for .30 PICRA + .308 | 175gr | Sierra HPBT MatchKing

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 175gr \| Sierra HPBT MatchKing
Manufacturer SKU:	2275
Bullet Weight:	175gr \| 11.3g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.240" \| 31.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.359" \| 9.1mm
Shank Seated Depth:	0.174" \| 4.4mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5889_C311
Last updated:	2026-01-22
Recommended Twist Rate:	1:11 - 1:9

Load data for 44 loads in caliber .30 PICRA with .308 | 175gr | Sierra HPBT MatchKing bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36390	90%	**58	100%
ADI APS 450	<<locked>>	63%	36114	89%	**5	100%
Accurate 4100	<<locked>>	73%	35795	88%	**40	93%
[Accurate No. 11 FS]*	<<locked>>	81%	35984	89%	**50	86%
Alliant 2400	<<locked>>	69%	35650	88%	**34	95%
Alliant BLUE DOT	<<locked>>	72%	35766	88%	**14	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	75%	36260	89%	**4	100%
Hodgdon H110	<<locked>>	77%	36216	89%	**76	90%
Hodgdon LilGun	<<locked>>	78%	35824	88%	**93	96%
Maxam CSB 1	<<locked>>	65%	36492	90%	**24	100%
Ramshot Enforcer	<<locked>>	70%	36187	89%	**53	97%
ReloadSwiss RS 14	<<locked>>	96%	24714	61%	**6	100%
ReloadSwiss RS 30	<<locked>>	94%	36347	90%	**02	93%
SNPE Vectan A0	<<locked>>	64%	36492	90%	**56	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	36434	90%	**47	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35447	87%	**02	100%
[Somchem S265]*	<<locked>>	85%	35476	87%	**14	89%
Vihtavuori 3N38	<<locked>>	68%	35940	88%	**84	100%
Vihtavuori N105	<<locked>>	71%	35636	88%	**98	100%
Vihtavuori N110	<<locked>>	86%	35462	87%	**53	96%
Vihtavuori N32C Tin Star	<<locked>>	79%	36129	89%	**5	100%
[Winchester 296]*	<<locked>>	77%	35520	87%	**80	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26484	65%	**30	100%
ADI APS 450	<<locked>>	61%	34664	85%	**2	100%
[Accurate 4100]*	<<locked>>	61%	24468	60%	**66	87%
[Accurate No. 11 FS]*	<<locked>>	72%	25904	64%	**06	80%
Alliant 2400	<<locked>>	61%	27064	67%	**12	91%
Alliant BLUE DOT	<<locked>>	61%	25976	64%	**63	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	25904	64%	**9	100%
[Hodgdon H110]*	<<locked>>	62%	21930	54%	**37	81%
[Hodgdon LilGun]*	<<locked>>	61%	19377	48%	**17	85%
Maxam CSB 1	<<locked>>	62%	33881	83%	**7	100%
Ramshot Enforcer	<<locked>>	61%	26745	66%	**12	92%
ReloadSwiss RS 14	<<locked>>	90%	22800	56%	**7	100%
[ReloadSwiss RS 30]*	<<locked>>	73%	20015	49%	**07	80%
SNPE Vectan A0	<<locked>>	61%	33852	83%	**27	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14286	35%	**0	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	30951	76%	**53	100%
[Somchem S265]*	<<locked>>	69%	23061	57%	**17	80%
Vihtavuori 3N38	<<locked>>	60%	28326	70%	**86	100%
Vihtavuori N105	<<locked>>	61%	25585	63%	**66	100%
[Vihtavuori N110]*	<<locked>>	61%	16853	42%	**8	83%
Vihtavuori N32C Tin Star	<<locked>>	62%	25614	63%	**3	100%
[Winchester 296]*	<<locked>>	68%	26701	66%	**38	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data