Load data for .30 PICRA + .308 | 175gr | Ferrobull Tripple Expand Jagd

Recommended Powder(s): SNPE Vectan BA6 1/2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 175gr \| Ferrobull Tripple Expand Jagd
Manufacturer SKU:	J-323-8mm-175
Bullet Weight:	175gr \| 11.3g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.232" \| 31.3mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.351" \| 8.9mm
Shank Seated Depth:	0.040" \| 1.0mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B9052_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 38 loads in caliber .30 PICRA with .308 | 175gr | Ferrobull Tripple Expand Jagd bullet and 19 powders such as SNPE Vectan BA6 1/2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	70%	36390	90%	**81	100%
Accurate 4100	<<locked>>	69%	35114	86%	**53	94%
[Accurate No. 11 FS]*	<<locked>>	78%	36027	89%	**83	88%
Alliant 2400	<<locked>>	66%	35781	88%	**66	96%
Alliant BLUE DOT	<<locked>>	69%	36361	90%	**47	100%
Hodgdon H110	<<locked>>	73%	35056	86%	**83	91%
Hodgdon LilGun	<<locked>>	74%	35215	87%	**06	97%
Hodgdon TrailBoss	<<locked>>	93%	25570	63%	**0	100%
Ramshot Enforcer	<<locked>>	66%	34882	86%	**53	97%
ReloadSwiss RS 14	<<locked>>	94%	25164	62%	**9	100%
ReloadSwiss RS 30	<<locked>>	89%	35172	87%	**12	94%
SNPE Vectan BA6 1/2 👍	<<locked>>	90%	35433	87%	**63	99%
SNPE Vectan BA7 1/2	<<locked>>	65%	36463	90%	**38	100%
Somchem S265	<<locked>>	82%	36274	89%	**53	90%
Vihtavuori 3N38	<<locked>>	65%	35737	88%	**11	100%
Vihtavuori N105	<<locked>>	67%	34664	85%	**07	100%
Vihtavuori N110	<<locked>>	82%	35186	87%	**70	97%
Vihtavuori N32C Tin Star	<<locked>>	78%	36492	90%	**8	100%
[Winchester 296]*	<<locked>>	73%	35636	88%	**02	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	28268	70%	**76	100%
[Accurate 4100]*	<<locked>>	61%	26919	66%	**25	89%
[Accurate No. 11 FS]*	<<locked>>	67%	25135	62%	**09	81%
Alliant 2400	<<locked>>	61%	30530	75%	**88	94%
Alliant BLUE DOT	<<locked>>	61%	28906	71%	**32	98%
[Hodgdon H110]*	<<locked>>	61%	23496	58%	**89	83%
[Hodgdon LilGun]*	<<locked>>	61%	22727	56%	**99	89%
Hodgdon TrailBoss	<<locked>>	60%	13996	34%	**9	100%
Ramshot Enforcer	<<locked>>	61%	29689	73%	**78	95%
ReloadSwiss RS 14	<<locked>>	61%	14054	35%	**6	100%
[ReloadSwiss RS 30]*	<<locked>>	69%	19856	49%	**24	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	15534	38%	**9	85%
SNPE Vectan BA7 1/2	<<locked>>	60%	32387	80%	**93	100%
[Somchem S265]*	<<locked>>	64%	22046	54%	**17	81%
Vihtavuori 3N38	<<locked>>	61%	31575	78%	**52	100%
Vihtavuori N105	<<locked>>	61%	28485	70%	**22	100%
[Vihtavuori N110]*	<<locked>>	61%	18565	46%	**1	86%
Vihtavuori N32C Tin Star	<<locked>>	61%	26020	64%	**0	100%
[Winchester 296]*	<<locked>>	62%	24874	61%	**29	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data