Load data for .30 PICRA + .308 | 170gr | Speer FN

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 170gr \| Speer FN
Manufacturer SKU:	2041
Bullet Weight:	170gr \| 11.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.140" \| 29.0mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.259" \| 6.6mm
Shank Seated Depth:	0.259" \| 6.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6163_C311
Last updated:	2025-01-01

Load data for 42 loads in caliber .30 PICRA with .308 | 170gr | Speer FN bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35650	88%	**75	100%
Accurate 4100	<<locked>>	71%	35143	87%	**57	93%
[Accurate No. 11 FS]*	<<locked>>	80%	34447	85%	**60	85%
Alliant 2400	<<locked>>	68%	35505	87%	**57	95%
Alliant BLUE DOT	<<locked>>	71%	35824	88%	**40	99%
[Hodgdon H110]*	<<locked>>	76%	35302	87%	**80	89%
Hodgdon LilGun	<<locked>>	77%	35940	88%	**19	96%
Hodgdon TrailBoss	<<locked>>	92%	24381	60%	**3	100%
Maxam CSB 1	<<locked>>	64%	36535	90%	**50	100%
Ramshot Enforcer	<<locked>>	68%	34548	85%	**53	96%
ReloadSwiss RS 14	<<locked>>	96%	24932	61%	**6	100%
ReloadSwiss RS 30	<<locked>>	92%	35433	87%	**09	93%
SNPE Vectan A0	<<locked>>	63%	36187	89%	**79	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	36492	90%	**80	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35984	89%	**35	100%
[Somchem S265]*	<<locked>>	84%	35636	88%	**37	88%
Vihtavuori 3N38	<<locked>>	68%	36056	89%	**14	100%
Vihtavuori N105	<<locked>>	70%	34853	86%	**14	100%
Vihtavuori N110	<<locked>>	86%	35984	89%	**86	96%
Vihtavuori N32C Tin Star	<<locked>>	78%	35984	89%	**8	100%
[Winchester 296]*	<<locked>>	76%	35694	88%	**09	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27238	67%	**66	100%
[Accurate 4100]*	<<locked>>	61%	25034	62%	**93	86%
[Accurate No. 11 FS]*	<<locked>>	73%	27760	68%	**55	81%
Alliant 2400	<<locked>>	61%	28152	69%	**42	92%
Alliant BLUE DOT	<<locked>>	61%	26397	65%	**89	97%
[Hodgdon H110]*	<<locked>>	63%	23076	57%	**73	81%
[Hodgdon LilGun]*	<<locked>>	61%	19972	49%	**40	85%
Hodgdon TrailBoss	<<locked>>	62%	14069	35%	**9	100%
Maxam CSB 1	<<locked>>	61%	33939	84%	**20	100%
Ramshot Enforcer	<<locked>>	61%	27659	68%	**45	92%
ReloadSwiss RS 14	<<locked>>	60%	13373	33%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	73%	20407	50%	**37	80%
SNPE Vectan A0	<<locked>>	61%	33692	83%	**53	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14489	36%	**3	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	31473	78%	**79	100%
[Somchem S265]*	<<locked>>	69%	23380	58%	**40	80%
Vihtavuori 3N38	<<locked>>	62%	29747	73%	**32	100%
Vihtavuori N105	<<locked>>	61%	26281	65%	**93	100%
[Vihtavuori N110]*	<<locked>>	61%	17274	43%	**5	83%
Vihtavuori N32C Tin Star	<<locked>>	61%	24831	61%	**3	100%
[Winchester 296]*	<<locked>>	68%	27282	67%	**68	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data