Load data for .30 PICRA + .308 | 170gr | Lapua Naturalis

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 170gr \| Lapua Naturalis
Manufacturer SKU:	NPL7105 \| N558
Bullet Weight:	170gr \| 11.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3100_C311
Last updated:	2025-02-02

Load data for 0 loads in caliber .30 PICRA with .308 | 170gr | Lapua Naturalis bullet and 0 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	36042	89%	**61	100%
ADI APS 450	<<locked>>	63%	36506	90%	**1	100%
Accurate 4100	<<locked>>	72%	35969	89%	**53	93%
[Accurate No. 11 FS]*	<<locked>>	81%	35824	88%	**60	86%
Alliant 2400	<<locked>>	69%	35810	88%	**47	95%
Alliant BLUE DOT	<<locked>>	71%	35781	88%	**20	99%
Alliant Herco	<<locked>>	70%	35505	87%	**79	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	35940	88%	**01	100%
[Hodgdon H110]*	<<locked>>	76%	35694	88%	**73	89%
Hodgdon LilGun	<<locked>>	78%	36274	89%	**16	96%
Hodgdon TrailBoss	<<locked>>	95%	25947	64%	**0	100%
Maxam CSB 1	<<locked>>	64%	35955	89%	**30	100%
Ramshot Enforcer	<<locked>>	69%	36521	90%	**60	96%
ReloadSwiss RS 14	<<locked>>	96%	25657	63%	**3	100%
ReloadSwiss RS 30	<<locked>>	93%	35752	88%	**99	92%
SNPE Vectan BA6 1/2	<<locked>>	95%	36390	90%	**60	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	36347	90%	**22	100%
[Somchem S265]*	<<locked>>	84%	35926	88%	**30	88%
Vihtavuori 3N38	<<locked>>	68%	35679	88%	**91	100%
Vihtavuori N105	<<locked>>	70%	35694	88%	**04	100%
Vihtavuori N110	<<locked>>	86%	35781	88%	**70	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	35679	88%	**2	100%
[Winchester 296]*	<<locked>>	76%	36042	89%	**89	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27354	67%	**50	100%
ADI APS 450	<<locked>>	62%	35201	87%	**8	100%
[Accurate 4100]*	<<locked>>	61%	25773	63%	**89	87%
[Accurate No. 11 FS]*	<<locked>>	73%	27949	69%	**38	81%
Alliant 2400	<<locked>>	61%	28514	70%	**35	92%
Alliant BLUE DOT	<<locked>>	61%	26919	66%	**83	97%
Alliant Herco	<<locked>>	62%	28848	71%	**01	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	26861	66%	**6	100%
[Hodgdon H110]*	<<locked>>	61%	22104	54%	**43	80%
[Hodgdon LilGun]*	<<locked>>	61%	20726	51%	**50	86%
Hodgdon TrailBoss	<<locked>>	90%	23859	59%	**3	100%
Maxam CSB 1	<<locked>>	61%	33330	82%	**7	100%
Ramshot Enforcer	<<locked>>	61%	28108	69%	**35	92%
ReloadSwiss RS 14	<<locked>>	88%	22756	56%	**0	100%
[ReloadSwiss RS 30]*	<<locked>>	72%	20479	50%	**20	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	60%	15040	37%	**6	83%
SNPE Vectan BA7 1/2	<<locked>>	61%	31589	78%	**66	100%
[Somchem S265]*	<<locked>>	68%	23641	58%	**30	80%
Vihtavuori 3N38	<<locked>>	61%	29327	72%	**06	100%
Vihtavuori N105	<<locked>>	61%	27006	66%	**89	100%
[Vihtavuori N110]*	<<locked>>	61%	17782	44%	**1	84%
Vihtavuori N32C Tin Star	<<locked>>	61%	25440	63%	**3	100%
[Winchester 296]*	<<locked>>	67%	27035	67%	**52	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data