Load data for .30 PICRA + .308 | 168gr | Sierra HPBT MatchKing

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 168gr \| Sierra HPBT MatchKing
Manufacturer SKU:	2200
Bullet Weight:	168gr \| 10.9g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.215" \| 30.9mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.334" \| 8.5mm
Shank Seated Depth:	0.184" \| 4.7mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5885_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 46 loads in caliber .30 PICRA with .308 | 168gr | Sierra HPBT MatchKing bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	34606	85%	**68	100%
Accurate 4100	<<locked>>	73%	36477	90%	**76	93%
[Accurate No. 11 FS]*	<<locked>>	82%	36172	89%	**86	86%
Accurate No. 9	<<locked>>	62%	35708	88%	**50	97%
Alliant 2400	<<locked>>	69%	34737	86%	**50	94%
Alliant BLUE DOT	<<locked>>	72%	36071	89%	**40	99%
[Hodgdon H110]*	<<locked>>	77%	35520	87%	**96	89%
Hodgdon LilGun	<<locked>>	78%	35389	87%	**16	95%
Hodgdon TrailBoss	<<locked>>	93%	24105	59%	**6	100%
Maxam CSB 1	<<locked>>	63%	35070	86%	**40	100%
Ramshot Enforcer	<<locked>>	70%	35853	88%	**73	96%
ReloadSwiss RS 14	<<locked>>	96%	24729	61%	**6	100%
ReloadSwiss RS 30	<<locked>>	93%	34838	86%	**12	92%
SNPE Vectan A0	<<locked>>	64%	36158	89%	**83	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	35969	89%	**73	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	34809	86%	**25	100%
[Somchem S265]*	<<locked>>	85%	35143	87%	**40	88%
Vihtavuori 3N38	<<locked>>	68%	35056	86%	**07	100%
Vihtavuori N105	<<locked>>	72%	35940	88%	**27	100%
Vihtavuori N110	<<locked>>	86%	35215	87%	**86	95%
Vihtavuori N32C Tin Star	<<locked>>	79%	35839	88%	**1	100%
Vihtavuori N350	<<locked>>	64%	36550	90%	**45	100%
[Winchester 296]*	<<locked>>	77%	36114	89%	**12	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26150	64%	**47	100%
[Accurate 4100]*	<<locked>>	61%	24395	60%	**93	86%
[Accurate No. 11 FS]*	<<locked>>	75%	28906	71%	**78	81%
Accurate No. 9	<<locked>>	61%	33663	83%	**27	96%
Alliant 2400	<<locked>>	61%	27398	67%	**38	91%
Alliant BLUE DOT	<<locked>>	61%	26382	65%	**96	96%
[Hodgdon H110]*	<<locked>>	64%	22858	56%	**79	80%
[Hodgdon LilGun]*	<<locked>>	61%	19160	47%	**37	84%
Hodgdon TrailBoss	<<locked>>	61%	13634	34%	**3	100%
Maxam CSB 1	<<locked>>	60%	32401	80%	**07	100%
Ramshot Enforcer	<<locked>>	61%	26687	66%	**38	92%
ReloadSwiss RS 14	<<locked>>	60%	13024	32%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	75%	21089	52%	**56	81%
SNPE Vectan A0	<<locked>>	61%	33634	83%	**56	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	13924	34%	**3	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	30501	75%	**76	100%
[Somchem S265]*	<<locked>>	71%	24294	60%	**63	81%
Vihtavuori 3N38	<<locked>>	61%	28761	71%	**19	100%
Vihtavuori N105	<<locked>>	60%	25222	62%	**86	100%
[Vihtavuori N110]*	<<locked>>	61%	16447	41%	**8	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24656	61%	**3	100%
Vihtavuori N350	<<locked>>	61%	34040	84%	**19	100%
[Winchester 296]*	<<locked>>	69%	27267	67%	**78	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data