Load data for .30 PICRA + .308 | 168gr | Berger Classic Hybrid Hunter

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 168gr \| Berger Classic Hybrid Hunter
Manufacturer SKU:	30570
Bullet Weight:	168gr \| 10.9g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.228" \| 31.2mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.128" \| 54.0mm
Seated Depth:	0.391" \| 9.9mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B1071_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:10

Load data for 46 loads in caliber .30 PICRA with .308 | 168gr | Berger Classic Hybrid Hunter bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	34737	86%	**71	100%
Accurate 4100	<<locked>>	73%	35723	88%	**76	93%
[Accurate No. 11 FS]*	<<locked>>	82%	35259	87%	**73	85%
Accurate No. 9	<<locked>>	63%	36100	89%	**57	97%
Accurate TCM	<<locked>>	62%	35868	88%	**47	98%
Alliant 2400	<<locked>>	69%	34911	86%	**57	95%
Alliant BLUE DOT	<<locked>>	72%	34940	86%	**30	99%
Hodgdon H110	<<locked>>	78%	35781	88%	**06	90%
Hodgdon LilGun	<<locked>>	78%	35650	88%	**25	96%
Hodgdon TrailBoss	<<locked>>	93%	24221	60%	**6	100%
Maxam CSB 1	<<locked>>	64%	35186	87%	**40	100%
Ramshot Enforcer	<<locked>>	70%	36042	89%	**83	96%
ReloadSwiss RS 14	<<locked>>	97%	24860	61%	**9	100%
ReloadSwiss RS 30	<<locked>>	94%	35056	86%	**22	92%
SNPE Vectan A0	<<locked>>	64%	36448	90%	**86	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	36172	89%	**80	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35070	86%	**32	100%
[Somchem S265]*	<<locked>>	85%	35404	87%	**47	88%
Vihtavuori 3N38	<<locked>>	67%	34200	84%	**01	100%
Vihtavuori N105	<<locked>>	72%	36100	89%	**30	100%
Vihtavuori N110	<<locked>>	87%	35462	87%	**93	96%
Vihtavuori N32C Tin Star	<<locked>>	79%	36158	89%	**5	100%
[Winchester 296]*	<<locked>>	78%	36361	90%	**22	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26107	64%	**56	100%
[Accurate 4100]*	<<locked>>	61%	23801	59%	**83	85%
[Accurate No. 11 FS]*	<<locked>>	75%	28282	70%	**75	81%
Accurate No. 9	<<locked>>	61%	34026	84%	**37	97%
Accurate TCM	<<locked>>	61%	33794	83%	**24	97%
Alliant 2400	<<locked>>	61%	27369	67%	**42	91%
Alliant BLUE DOT	<<locked>>	61%	25599	63%	**89	96%
[Hodgdon H110]*	<<locked>>	64%	23047	57%	**86	81%
[Hodgdon LilGun]*	<<locked>>	61%	19305	48%	**43	84%
Hodgdon TrailBoss	<<locked>>	61%	13764	34%	**6	100%
Maxam CSB 1	<<locked>>	61%	32648	80%	**10	100%
Ramshot Enforcer	<<locked>>	61%	26861	66%	**48	92%
ReloadSwiss RS 14	<<locked>>	60%	13039	32%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	75%	21205	52%	**63	81%
SNPE Vectan A0	<<locked>>	61%	33866	83%	**60	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14025	35%	**6	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	30589	75%	**79	100%
[Somchem S265]*	<<locked>>	71%	24308	60%	**70	81%
Vihtavuori 3N38	<<locked>>	60%	27905	69%	**06	99%
Vihtavuori N105	<<locked>>	61%	25164	62%	**89	100%
[Vihtavuori N110]*	<<locked>>	61%	16433	40%	**2	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24714	61%	**7	100%
[Winchester 296]*	<<locked>>	69%	27456	68%	**88	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.