Load data for .30 PICRA + .308 | 167gr | Lapua Scenar

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 167gr \| Lapua Scenar
Manufacturer SKU:	4PL7069 \| GB422
Bullet Weight:	167gr \| 10.8g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.240" \| 31.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.359" \| 9.1mm
Shank Seated Depth:	0.182" \| 4.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3151_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:9

Load data for 54 loads in caliber .30 PICRA with .308 | 167gr | Lapua Scenar bullet and 27 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	36085	89%	**84	100%
ADI APS 450	<<locked>>	64%	36390	90%	**1	100%
Accurate 4100	<<locked>>	74%	35273	87%	**63	92%
[Accurate No. 11 FS]*	<<locked>>	83%	35172	87%	**70	85%
Accurate No. 9	<<locked>>	63%	35433	87%	**50	97%
Accurate TCM	<<locked>>	63%	35563	88%	**43	98%
Alliant 2400	<<locked>>	70%	35302	87%	**60	95%
Alliant BLUE DOT	<<locked>>	73%	35447	87%	**30	99%
[Hodgdon H110]*	<<locked>>	79%	35708	88%	**93	89%
Hodgdon LilGun	<<locked>>	80%	36158	89%	**32	95%
Hodgdon TrailBoss	<<locked>>	94%	24163	60%	**0	100%
Lovex D037.2	<<locked>>	62%	35433	87%	**50	97%
Maxam CSB 1	<<locked>>	64%	35273	87%	**37	100%
Ramshot Enforcer	<<locked>>	70%	34519	85%	**57	95%
ReloadSwiss RS 14	<<locked>>	95%	23772	59%	**3	100%
ReloadSwiss RS 30	<<locked>>	95%	35056	86%	**06	92%
SNPE Vectan A0	<<locked>>	64%	35143	87%	**70	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	33910	83%	**43	97%
SNPE Vectan BA7 1/2	<<locked>>	68%	36477	90%	**45	100%
Shooters World Heavy Pistol	<<locked>>	62%	35433	87%	**50	97%
[Somchem S265]*	<<locked>>	87%	36318	89%	**53	88%
Vihtavuori 3N38	<<locked>>	68%	34418	85%	**98	100%
Vihtavuori N105	<<locked>>	72%	35215	87%	**17	100%
Vihtavuori N110	<<locked>>	88%	35056	86%	**83	95%
Vihtavuori N32C Tin Star	<<locked>>	80%	36332	89%	**1	100%
Vihtavuori N350	<<locked>>	64%	35752	88%	**38	100%
[Winchester 296]*	<<locked>>	79%	35955	89%	**19	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	25266	62%	**37	100%
ADI APS 450	<<locked>>	60%	33518	83%	**2	100%
[Accurate 4100]*	<<locked>>	61%	23366	58%	**63	84%
[Accurate No. 11 FS]*	<<locked>>	77%	29646	73%	**88	81%
Accurate No. 9	<<locked>>	61%	33330	82%	**14	96%
Accurate TCM	<<locked>>	61%	33417	82%	**07	97%
[Alliant 2400]*	<<locked>>	61%	25976	64%	**12	89%
Alliant BLUE DOT	<<locked>>	62%	25657	63%	**86	96%
[Hodgdon H110]*	<<locked>>	67%	24047	59%	**96	81%
[Hodgdon LilGun]*	<<locked>>	61%	18159	45%	**14	82%
Hodgdon TrailBoss	<<locked>>	61%	13373	33%	**6	100%
Lovex D037.2	<<locked>>	61%	33330	82%	**14	96%
Maxam CSB 1	<<locked>>	61%	32474	80%	**10	100%
Ramshot Enforcer	<<locked>>	61%	25498	63%	**09	90%
ReloadSwiss RS 14	<<locked>>	62%	13460	33%	**6	100%
[ReloadSwiss RS 30]*	<<locked>>	78%	22002	54%	**73	81%
SNPE Vectan A0	<<locked>>	61%	32474	80%	**40	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	14431	36%	**3	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	29617	73%	**63	100%
Shooters World Heavy Pistol	<<locked>>	61%	33330	82%	**14	96%
[Somchem S265]*	<<locked>>	73%	24584	61%	**70	80%
Vihtavuori 3N38	<<locked>>	61%	27949	69%	**09	99%
Vihtavuori N105	<<locked>>	60%	24294	60%	**73	100%
[Vihtavuori N110]*	<<locked>>	61%	16027	39%	**8	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24700	61%	**0	100%
Vihtavuori N350	<<locked>>	61%	32996	81%	**06	100%
[Winchester 296]*	<<locked>>	72%	28543	70%	**94	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.