top of page

Load data for .30 PICRA + .308 | 165gr | Speer Grand Slam

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 165gr | Speer Grand Slam

Load Specifications

Bullet:
.308 | 165gr | Speer Grand Slam
Manufacturer SKU:
2038
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.080" | 27.4mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.172" | 55.2mm
Seated Depth:
0.199" | 5.1mm
Shank Seated Depth:
0.199" | 5.1mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B6156_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 40 loads in caliber .30 PICRA with .308 | 165gr | Speer Grand Slam bullet and 20 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
71%
35897
88%
**07
100%
Accurate 4100
<<locked>>
70%
35157
87%
**76
92%
[Accurate No. 11 FS]*
<<locked>>
80%
35853
88%
**99
86%
Alliant 2400
<<locked>>
68%
35911
88%
**93
95%
Alliant BLUE DOT
<<locked>>
69%
34635
85%
**47
99%
[Hodgdon H110]*
<<locked>>
75%
34853
86%
**06
89%
Hodgdon LilGun
<<locked>>
75%
34969
86%
**29
95%
Hodgdon TrailBoss
<<locked>>
95%
25454
63%
**3
100%
Maxam CSB 1
<<locked>>
63%
36114
89%
**73
100%
Ramshot Enforcer
<<locked>>
67%
34969
86%
**83
96%
ReloadSwiss RS 14
<<locked>>
95%
24947
61%
**2
100%
ReloadSwiss RS 30
<<locked>>
91%
34925
86%
**39
92%
SNPE Vectan BA6 1/2
<<locked>>
93%
35244
87%
**83
98%
SNPE Vectan BA7 1/2
<<locked>>
66%
36085
89%
**68
100%
[Somchem S265]*
<<locked>>
83%
35447
87%
**70
88%
Vihtavuori 3N38
<<locked>>
67%
36085
89%
**43
100%
Vihtavuori N105
<<locked>>
69%
34592
85%
**30
100%
Vihtavuori N110
<<locked>>
84%
34940
86%
**93
95%
Vihtavuori N32C Tin Star
<<locked>>
77%
35389
87%
**8
100%
[Winchester 296]*
<<locked>>
75%
35288
87%
**19
85%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
62%
27746
68%
**93
100%
[Accurate 4100]*
<<locked>>
61%
25454
63%
**25
87%
[Accurate No. 11 FS]*
<<locked>>
72%
27688
68%
**78
81%
Alliant 2400
<<locked>>
61%
28892
71%
**81
92%
Alliant BLUE DOT
<<locked>>
61%
27383
67%
**35
97%
[Hodgdon H110]*
<<locked>>
62%
23134
57%
**02
81%
[Hodgdon LilGun]*
<<locked>>
61%
21103
52%
**93
86%
Hodgdon TrailBoss
<<locked>>
61%
13967
34%
**2
100%
Maxam CSB 1
<<locked>>
61%
33823
83%
**47
100%
Ramshot Enforcer
<<locked>>
61%
28021
69%
**78
92%
ReloadSwiss RS 14
<<locked>>
62%
13938
34%
**2
100%
[ReloadSwiss RS 30]*
<<locked>>
72%
20697
51%
**60
80%
[SNPE Vectan BA6 1/2]*
<<locked>>
61%
14721
36%
**9
82%
SNPE Vectan BA7 1/2
<<locked>>
61%
31879
78%
**19
100%
[Somchem S265]*
<<locked>>
69%
23830
59%
**73
80%
Vihtavuori 3N38
<<locked>>
61%
29878
74%
**58
100%
Vihtavuori N105
<<locked>>
61%
26556
65%
**25
100%
[Vihtavuori N110]*
<<locked>>
61%
17477
43%
**4
83%
Vihtavuori N32C Tin Star
<<locked>>
61%
25077
62%
**0
100%
[Winchester 296]*
<<locked>>
67%
27354
67%
**94
80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page