Load data for .30 PICRA + .308 | 165gr | RWS Kegelspitz

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 165gr \| RWS Kegelspitz
Manufacturer SKU:	2146371
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.102" \| 28.0mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.221" \| 5.6mm
Shank Seated Depth:	0.221" \| 5.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5427_C311
Last updated:	2025-01-01

Load data for 40 loads in caliber .30 PICRA with .308 | 165gr | RWS Kegelspitz bullet and 20 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	70%	34577	85%	**81	100%
Accurate 4100	<<locked>>	71%	35157	87%	**83	92%
[Accurate No. 11 FS]*	<<locked>>	81%	36274	89%	**02	86%
Alliant 2400	<<locked>>	68%	34911	86%	**73	95%
Alliant BLUE DOT	<<locked>>	72%	36448	90%	**73	99%
[Hodgdon H110]*	<<locked>>	76%	35955	89%	**16	89%
Hodgdon LilGun	<<locked>>	77%	36013	89%	**52	96%
Hodgdon TrailBoss	<<locked>>	97%	25976	64%	**6	100%
Maxam CSB 1	<<locked>>	63%	35708	88%	**66	100%
Ramshot Enforcer	<<locked>>	68%	34867	86%	**76	95%
ReloadSwiss RS 14	<<locked>>	95%	24555	60%	**2	100%
ReloadSwiss RS 30	<<locked>>	93%	36274	89%	**45	93%
SNPE Vectan BA6 1/2	<<locked>>	93%	35462	87%	**83	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	36027	89%	**61	100%
[Somchem S265]*	<<locked>>	83%	34940	86%	**53	88%
Vihtavuori 3N38	<<locked>>	68%	35810	88%	**30	100%
Vihtavuori N105	<<locked>>	69%	34679	85%	**30	100%
Vihtavuori N110	<<locked>>	85%	35331	87%	**06	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	35114	86%	**4	100%
[Winchester 296]*	<<locked>>	75%	35462	87%	**22	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	26585	65%	**76	100%
[Accurate 4100]*	<<locked>>	61%	25440	63%	**19	86%
[Accurate No. 11 FS]*	<<locked>>	73%	27891	69%	**78	81%
Alliant 2400	<<locked>>	61%	27789	68%	**61	91%
Alliant BLUE DOT	<<locked>>	61%	27340	67%	**32	97%
[Hodgdon H110]*	<<locked>>	62%	22568	56%	**86	80%
[Hodgdon LilGun]*	<<locked>>	61%	20233	50%	**66	85%
Hodgdon TrailBoss	<<locked>>	62%	14156	35%	**6	100%
Maxam CSB 1	<<locked>>	61%	33373	82%	**40	100%
Ramshot Enforcer	<<locked>>	61%	27978	69%	**71	92%
ReloadSwiss RS 14	<<locked>>	61%	13547	33%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	21234	52%	**76	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14533	36%	**2	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	31720	78%	**12	100%
[Somchem S265]*	<<locked>>	70%	24323	60%	**79	81%
Vihtavuori 3N38	<<locked>>	61%	29820	73%	**55	100%
Vihtavuori N105	<<locked>>	61%	26397	65%	**19	100%
[Vihtavuori N110]*	<<locked>>	61%	17245	42%	**1	82%
Vihtavuori N32C Tin Star	<<locked>>	60%	24627	61%	**0	100%
[Winchester 296]*	<<locked>>	68%	27369	67%	**91	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data