Load data for .30 PICRA + .308 | 165gr | Nosler CT FailSafe

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 165gr \| Nosler CT FailSafe
Manufacturer SKU:	53175
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.240" \| 31.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.359" \| 9.1mm
Shank Seated Depth:	0.359" \| 9.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4094_C311
Last updated:	2025-01-01

Load data for 46 loads in caliber .30 PICRA with .308 | 165gr | Nosler CT FailSafe bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35244	87%	**65	100%
Accurate 4100	<<locked>>	72%	34795	86%	**47	91%
[Accurate No. 11 FS]*	<<locked>>	82%	34925	86%	**50	84%
Accurate TCM	<<locked>>	63%	36274	89%	**40	97%
Alliant 2400	<<locked>>	69%	34534	85%	**40	94%
Alliant BLUE DOT	<<locked>>	73%	36274	89%	**37	99%
[Hodgdon H110]*	<<locked>>	77%	34722	86%	**66	88%
Hodgdon LilGun	<<locked>>	79%	36013	89%	**29	95%
Hodgdon TrailBoss	<<locked>>	94%	25034	62%	**3	100%
Maxam CSB 1	<<locked>>	65%	36230	89%	**37	100%
Ramshot Enforcer	<<locked>>	70%	36230	89%	**73	96%
ReloadSwiss RS 14	<<locked>>	95%	24656	61%	**6	100%
ReloadSwiss RS 30	<<locked>>	94%	34766	86%	**99	91%
SNPE Vectan A0	<<locked>>	64%	36085	89%	**73	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	35317	87%	**60	97%
SNPE Vectan BA7 1/2	<<locked>>	67%	35331	87%	**22	100%
[Somchem S265]*	<<locked>>	86%	36100	89%	**40	87%
Vihtavuori 3N38	<<locked>>	68%	34954	86%	**98	100%
Vihtavuori N105	<<locked>>	71%	34780	86%	**04	100%
Vihtavuori N110	<<locked>>	88%	36434	90%	**86	95%
Vihtavuori N32C Tin Star	<<locked>>	77%	34896	86%	**2	100%
Vihtavuori N350	<<locked>>	63%	35621	88%	**32	100%
[Winchester 296]*	<<locked>>	77%	34911	86%	**89	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26252	65%	**40	100%
[Accurate 4100]*	<<locked>>	61%	24685	61%	**79	85%
[Accurate No. 11 FS]*	<<locked>>	76%	29298	72%	**75	81%
Accurate TCM	<<locked>>	61%	34243	84%	**17	97%
Alliant 2400	<<locked>>	61%	27137	67%	**25	90%
Alliant BLUE DOT	<<locked>>	61%	26266	65%	**83	96%
[Hodgdon H110]*	<<locked>>	64%	23728	58%	**79	80%
[Hodgdon LilGun]*	<<locked>>	61%	19783	49%	**37	84%
Hodgdon TrailBoss	<<locked>>	60%	13953	34%	**3	100%
Maxam CSB 1	<<locked>>	61%	33272	82%	**10	100%
Ramshot Enforcer	<<locked>>	61%	26774	66%	**22	91%
ReloadSwiss RS 14	<<locked>>	61%	14069	35%	**6	100%
[ReloadSwiss RS 30]*	<<locked>>	76%	21959	54%	**63	81%
SNPE Vectan A0	<<locked>>	61%	33431	82%	**43	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14707	36%	**3	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	30806	76%	**66	100%
[Somchem S265]*	<<locked>>	71%	24903	61%	**56	80%
Vihtavuori 3N38	<<locked>>	61%	28819	71%	**09	99%
Vihtavuori N105	<<locked>>	61%	25962	64%	**83	100%
[Vihtavuori N110]*	<<locked>>	61%	17202	42%	**2	82%
Vihtavuori N32C Tin Star	<<locked>>	61%	25454	63%	**3	100%
Vihtavuori N350	<<locked>>	60%	33315	82%	**02	100%
[Winchester 296]*	<<locked>>	71%	29631	73%	**01	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data