top of page

Load data for .30 PICRA + .308 | 165gr | Hornady InterBond

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 165gr | Hornady InterBond

Load Specifications

Bullet:
.308 | 165gr | Hornady InterBond
Manufacturer SKU:
30459
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.300" | 33.0mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.172" | 55.2mm
Seated Depth:
0.419" | 10.6mm
Shank Seated Depth:
0.219" | 5.6mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B2681_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .30 PICRA with .308 | 165gr | Hornady InterBond bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
75%
36172
89%
**81
100%
Accurate 4100
<<locked>>
76%
35969
89%
**70
92%
[Accurate No. 11 FS]*
<<locked>>
85%
36129
89%
**80
85%
Accurate No. 9
<<locked>>
65%
35752
88%
**53
96%
Accurate Solo 1250
<<locked>>
64%
36129
89%
**50
100%
Accurate TCM
<<locked>>
64%
35549
88%
**40
97%
Alliant 2400
<<locked>>
71%
34258
84%
**47
94%
Alliant BLUE DOT
<<locked>>
73%
34345
85%
**20
99%
[Hodgdon H110]*
<<locked>>
81%
36289
89%
**96
88%
Hodgdon LilGun
<<locked>>
82%
35462
87%
**19
95%
Hodgdon TrailBoss
<<locked>>
96%
24337
60%
**6
100%
Lovex D037.2
<<locked>>
63%
34635
85%
**30
96%
Maxam CSB 1
<<locked>>
64%
34592
85%
**30
100%
Ramshot Enforcer
<<locked>>
73%
35853
88%
**80
95%
ReloadSwiss RS 14
<<locked>>
94%
22916
56%
**0
100%
ReloadSwiss RS 24
<<locked>>
63%
36245
89%
**27
100%
ReloadSwiss RS 30
<<locked>>
97%
34882
86%
**06
91%
Rottweil P 806
<<locked>>
63%
34476
85%
**78
100%
SNPE Vectan A0
<<locked>>
64%
34548
85%
**60
100%
SNPE Vectan BA6 1/2
<<locked>>
97%
33286
82%
**37
96%
SNPE Vectan BA7 1/2
<<locked>>
69%
36376
90%
**38
100%
Shooters World Heavy Pistol
<<locked>>
63%
34635
85%
**30
96%
[Somchem S265]*
<<locked>>
88%
35998
89%
**40
87%
Vihtavuori 3N38
<<locked>>
71%
35520
87%
**14
100%
Vihtavuori N105
<<locked>>
74%
34751
86%
**17
100%
Vihtavuori N110
<<locked>>
91%
36289
89%
**93
95%
Vihtavuori N32C Tin Star
<<locked>>
80%
35926
88%
**5
100%
Vihtavuori N350
<<locked>>
63%
34055
84%
**19
100%
[Winchester 296]*
<<locked>>
79%
34490
85%
**96
84%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
24743
61%
**27
100%
[Accurate 4100]*
<<locked>>
61%
21625
53%
**33
82%
[Accurate No. 11 FS]*
<<locked>>
80%
29965
74%
**91
81%
Accurate No. 9
<<locked>>
61%
31531
78%
**91
95%
Accurate Solo 1250
<<locked>>
61%
33185
82%
**20
100%
Accurate TCM
<<locked>>
61%
31270
77%
**75
96%
[Alliant 2400]*
<<locked>>
61%
24889
61%
**93
88%
Alliant BLUE DOT
<<locked>>
61%
24424
60%
**63
95%
[Hodgdon H110]*
<<locked>>
68%
24004
59%
**99
80%
[Hodgdon LilGun]*
<<locked>>
61%
17434
43%
**7
81%
Hodgdon TrailBoss
<<locked>>
61%
13126
32%
**3
100%
Lovex D037.2
<<locked>>
61%
32634
80%
**04
95%
Maxam CSB 1
<<locked>>
61%
31676
78%
**4
100%
[Ramshot Enforcer]*
<<locked>>
61%
24511
60%
**93
89%
ReloadSwiss RS 14
<<locked>>
60%
12517
31%
**6
100%
ReloadSwiss RS 24
<<locked>>
61%
33953
84%
**01
100%
[ReloadSwiss RS 30]*
<<locked>>
81%
22843
56%
**86
81%
Rottweil P 806
<<locked>>
61%
32503
80%
**58
100%
SNPE Vectan A0
<<locked>>
61%
31763
78%
**33
100%
[SNPE Vectan BA6 1/2]*
<<locked>>
66%
14605
36%
**9
81%
SNPE Vectan BA7 1/2
<<locked>>
61%
29138
72%
**53
100%
Shooters World Heavy Pistol
<<locked>>
61%
32634
80%
**04
95%
[Somchem S265]*
<<locked>>
76%
25541
63%
**86
81%
Vihtavuori 3N38
<<locked>>
61%
26556
65%
**83
99%
Vihtavuori N105
<<locked>>
61%
23380
58%
**56
100%
[Vihtavuori N110]*
<<locked>>
66%
17158
42%
**8
81%
Vihtavuori N32C Tin Star
<<locked>>
61%
23743
58%
**7
100%
Vihtavuori N350
<<locked>>
60%
31328
77%
**86
100%
[Winchester 296]*
<<locked>>
74%
28616
70%
**01
80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page