Load data for .30 PICRA + .308 | 165gr | H&N RN H

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 165gr \| H&N RN H
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.980" \| 24.9mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.129" \| 54.1mm
Seated Depth:	0.142" \| 3.6mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7409_C311
Last updated:	2025-01-01

Load data for 44 loads in caliber .30 PICRA with .308 | 165gr | H&N RN H bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	70%	34432	85%	**04	100%
ADI APS 450	<<locked>>	64%	36550	90%	**14	100%
Accurate 4100	<<locked>>	72%	34940	86%	**96	92%
[Accurate No. 11 FS]*	<<locked>>	81%	35505	87%	**16	86%
Alliant 2400	<<locked>>	69%	35433	87%	**02	95%
Alliant BLUE DOT	<<locked>>	72%	35998	89%	**80	99%
Hodgdon H110	<<locked>>	77%	35476	87%	**35	90%
Hodgdon LilGun	<<locked>>	77%	35201	87%	**45	95%
Hodgdon TrailBoss	<<locked>>	94%	23815	59%	**9	100%
Maxam CSB 1	<<locked>>	64%	35592	88%	**86	100%
Ramshot Enforcer	<<locked>>	69%	34824	86%	**96	96%
ReloadSwiss RS 14	<<locked>>	97%	23830	59%	**9	100%
ReloadSwiss RS 30	<<locked>>	93%	35766	88%	**65	93%
SNPE Vectan A0	<<locked>>	64%	36332	89%	**25	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	36361	90%	**19	98%
SNPE Vectan BA7 1/2	<<locked>>	65%	34722	86%	**68	100%
[Somchem S265]*	<<locked>>	85%	35505	87%	**86	88%
Vihtavuori 3N38	<<locked>>	68%	35665	88%	**57	100%
Vihtavuori N105	<<locked>>	71%	35375	87%	**66	100%
Vihtavuori N110	<<locked>>	86%	36172	89%	**29	96%
Vihtavuori N32C Tin Star	<<locked>>	79%	35549	88%	**01	100%
[Winchester 296]*	<<locked>>	77%	36158	89%	**52	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26571	65%	**93	100%
ADI APS 450	<<locked>>	61%	34127	84%	**1	100%
[Accurate 4100]*	<<locked>>	61%	23714	58%	**06	85%
[Accurate No. 11 FS]*	<<locked>>	73%	27340	67%	**81	80%
Alliant 2400	<<locked>>	61%	26774	66%	**65	90%
Alliant BLUE DOT	<<locked>>	61%	25309	62%	**15	96%
[Hodgdon H110]*	<<locked>>	65%	23308	57%	**25	81%
[Hodgdon LilGun]*	<<locked>>	61%	18420	45%	**33	82%
Hodgdon TrailBoss	<<locked>>	62%	12720	31%	**6	100%
Maxam CSB 1	<<locked>>	61%	33272	82%	**63	100%
Ramshot Enforcer	<<locked>>	61%	26281	65%	**58	91%
ReloadSwiss RS 14	<<locked>>	61%	11835	29%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	75%	20929	52%	**89	81%
SNPE Vectan A0	<<locked>>	61%	34011	84%	**99	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	14605	36%	**6	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	30690	76%	**12	100%
[Somchem S265]*	<<locked>>	71%	23569	58%	**93	80%
Vihtavuori 3N38	<<locked>>	61%	27876	69%	**45	99%
Vihtavuori N105	<<locked>>	61%	25208	62%	**19	100%
[Vihtavuori N110]*	<<locked>>	63%	16331	40%	**8	80%
Vihtavuori N32C Tin Star	<<locked>>	60%	23511	58%	**0	100%
[Winchester 296]*	<<locked>>	70%	27644	68%	**11	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data