Load data for .30 PICRA + .308 | 165gr | Barnes X BT

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 165gr \| Barnes X BT
Manufacturer SKU:	30827
Bullet Weight:	165gr \| 10.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.300" \| 33.0mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.419" \| 10.6mm
Shank Seated Depth:	0.294" \| 7.5mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B616_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:10 - 1:9

Load data for 46 loads in caliber .30 PICRA with .308 | 165gr | Barnes X BT bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36260	89%	**61	100%
Accurate 4100	<<locked>>	72%	35085	86%	**34	91%
[Accurate No. 11 FS]*	<<locked>>	82%	35592	88%	**43	84%
Accurate No. 9	<<locked>>	63%	36550	90%	**30	96%
Accurate TCM	<<locked>>	62%	36419	90%	**24	97%
Alliant 2400	<<locked>>	69%	35650	88%	**40	94%
Alliant BLUE DOT	<<locked>>	71%	34563	85%	**98	99%
[Hodgdon H110]*	<<locked>>	76%	35041	86%	**53	88%
Hodgdon LilGun	<<locked>>	79%	35839	88%	**99	95%
Hodgdon TrailBoss	<<locked>>	96%	26165	64%	**3	100%
Maxam CSB 1	<<locked>>	65%	36361	90%	**30	100%
Ramshot Enforcer	<<locked>>	69%	35462	87%	**43	95%
ReloadSwiss RS 14	<<locked>>	97%	26165	64%	**6	100%
ReloadSwiss RS 30	<<locked>>	95%	36230	89%	**96	91%
SNPE Vectan A0	<<locked>>	64%	36448	90%	**63	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	35679	88%	**43	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35128	87%	**06	100%
[Somchem S265]*	<<locked>>	83%	34969	86%	**01	86%
Vihtavuori 3N38	<<locked>>	68%	35810	88%	**88	100%
Vihtavuori N105	<<locked>>	71%	35331	87%	**94	100%
Vihtavuori N110	<<locked>>	87%	35621	88%	**60	95%
Vihtavuori N32C Tin Star	<<locked>>	77%	35447	87%	**8	100%
[Winchester 296]*	<<locked>>	76%	34809	86%	**73	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27050	67%	**40	100%
[Accurate 4100]*	<<locked>>	61%	24976	62%	**63	85%
[Accurate No. 11 FS]*	<<locked>>	76%	29965	74%	**65	81%
Accurate No. 9	<<locked>>	61%	34635	85%	**04	96%
Accurate TCM	<<locked>>	61%	34113	84%	**94	97%
Alliant 2400	<<locked>>	61%	28123	69%	**15	90%
Alliant BLUE DOT	<<locked>>	61%	26760	66%	**73	96%
[Hodgdon H110]*	<<locked>>	63%	24076	59%	**66	80%
[Hodgdon LilGun]*	<<locked>>	61%	21190	52%	**53	86%
Hodgdon TrailBoss	<<locked>>	60%	14823	36%	**9	100%
Maxam CSB 1	<<locked>>	61%	33504	82%	**4	100%
Ramshot Enforcer	<<locked>>	61%	28340	70%	**29	92%
ReloadSwiss RS 14	<<locked>>	62%	14910	37%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	22118	54%	**47	81%
SNPE Vectan A0	<<locked>>	61%	33837	83%	**33	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	16157	40%	**6	84%
SNPE Vectan BA7 1/2	<<locked>>	60%	30618	75%	**50	100%
[Somchem S265]*	<<locked>>	70%	25106	62%	**47	80%
Vihtavuori 3N38	<<locked>>	61%	29153	72%	**96	99%
Vihtavuori N105	<<locked>>	61%	26339	65%	**73	100%
[Vihtavuori N110]*	<<locked>>	61%	18260	45%	**1	83%
Vihtavuori N32C Tin Star	<<locked>>	61%	25570	63%	**7	100%
[Winchester 296]*	<<locked>>	70%	29733	73%	**91	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data