Load data for .30 PICRA + .308 | 152gr | Remington SP Extended-Range

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 152gr \| Remington SP Extended-Range
Bullet Weight:	152gr \| 9.8g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.000" \| 25.4mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.169" \| 55.1mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5168_C311
Last updated:	2026-01-21

Load data for 44 loads in caliber .30 PICRA with .308 | 152gr | Remington SP Extended-Range bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	36492	90%	**80	100%
ADI APS 350	<<locked>>	62%	36230	89%	**37	100%
Accurate 4100	<<locked>>	72%	36289	89%	**68	92%
[Accurate No. 11 FS]*	<<locked>>	81%	36347	90%	**78	85%
Alliant 2400	<<locked>>	68%	36085	89%	**62	94%
Alliant BLUE DOT	<<locked>>	71%	36405	90%	**32	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	36274	89%	**06	100%
[Hodgdon H110]*	<<locked>>	76%	36274	89%	**81	88%
Hodgdon LilGun	<<locked>>	76%	35853	88%	**07	94%
Maxam CSB 1	<<locked>>	63%	35824	88%	**29	100%
Ramshot Enforcer	<<locked>>	69%	36550	90%	**78	95%
ReloadSwiss RS 14	<<locked>>	96%	25106	62%	**8	100%
ReloadSwiss RS 30	<<locked>>	92%	35694	88%	**11	91%
SNPE Vectan A0	<<locked>>	63%	36187	89%	**75	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	36289	89%	**68	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35810	88%	**27	100%
[Somchem S265]*	<<locked>>	84%	36434	90%	**45	87%
Vihtavuori 3N38	<<locked>>	67%	35911	88%	**12	100%
Vihtavuori N105	<<locked>>	70%	35839	88%	**12	100%
Vihtavuori N110	<<locked>>	85%	35781	88%	**78	95%
Vihtavuori N32C Tin Star	<<locked>>	78%	36187	89%	**47	100%
[Winchester 296]*	<<locked>>	75%	35940	88%	**91	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27108	67%	**45	100%
ADI APS 350	<<locked>>	61%	35041	86%	**17	100%
[Accurate 4100]*	<<locked>>	61%	25628	63%	**84	85%
[Accurate No. 11 FS]*	<<locked>>	74%	29472	73%	**63	80%
Alliant 2400	<<locked>>	61%	28674	71%	**43	91%
Alliant BLUE DOT	<<locked>>	61%	26948	66%	**88	96%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	26585	65%	**1	100%
[Hodgdon H110]*	<<locked>>	64%	24526	60%	**75	80%
[Hodgdon LilGun]*	<<locked>>	61%	20595	51%	**29	84%
Maxam CSB 1	<<locked>>	61%	33518	83%	**02	100%
Ramshot Enforcer	<<locked>>	61%	28326	70%	**40	91%
ReloadSwiss RS 14	<<locked>>	91%	23337	57%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	75%	21944	54%	**42	80%
SNPE Vectan A0	<<locked>>	61%	33968	84%	**45	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14765	36%	**5	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	31879	78%	**75	100%
[Somchem S265]*	<<locked>>	71%	25106	62%	**52	80%
Vihtavuori 3N38	<<locked>>	61%	29559	73%	**07	99%
Vihtavuori N105	<<locked>>	61%	27253	67%	**94	100%
[Vihtavuori N110]*	<<locked>>	61%	17593	43%	**20	81%
Vihtavuori N32C Tin Star	<<locked>>	63%	26194	64%	**5	100%
[Winchester 296]*	<<locked>>	69%	28935	71%	**86	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data