top of page

Load data for .30 PICRA + .308 | 150gr | Speer Boat Tail Soft Point

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 150gr | Speer Boat Tail Soft Point

Load Specifications

Bullet:
.308 | 150gr | Speer Boat Tail Soft Point
Manufacturer SKU:
2022
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.100" | 27.9mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.111" | 53.6mm
Seated Depth:
0.280" | 7.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B6147_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber .30 PICRA with .308 | 150gr | Speer Boat Tail Soft Point bullet and 28 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
73%
35244
87%
**57
100%
ADI APS 450
<<locked>>
64%
36245
89%
**47
100%
Accurate 4100
<<locked>>
74%
35143
87%
**39
90%
[Accurate No. 11 FS]*
<<locked>>
84%
36085
89%
**65
83%
Accurate No. 9
<<locked>>
64%
36042
89%
**42
96%
Accurate TCM
<<locked>>
64%
35998
89%
**35
97%
Alliant 2400
<<locked>>
71%
35911
88%
**55
93%
Alliant BLUE DOT
<<locked>>
74%
35592
88%
**25
98%
[Hodgdon H110]*
<<locked>>
80%
36376
90%
**91
88%
Hodgdon LilGun
<<locked>>
81%
35955
89%
**14
94%
Hodgdon TrailBoss
<<locked>>
97%
25048
62%
**2
100%
Lovex D037.2
<<locked>>
62%
35099
86%
**22
95%
Maxam CSB 1
<<locked>>
64%
34447
85%
**09
100%
Ramshot Enforcer
<<locked>>
71%
35578
88%
**55
94%
ReloadSwiss RS 14
<<locked>>
95%
23583
58%
**8
100%
ReloadSwiss RS 30
<<locked>>
96%
35940
89%
**04
90%
Rottweil P 806
<<locked>>
63%
35607
88%
**80
100%
SNPE Vectan A0
<<locked>>
64%
35331
87%
**58
100%
SNPE Vectan BA6 1/2
<<locked>>
96%
34287
84%
**29
96%
SNPE Vectan BA7 1/2
<<locked>>
68%
35737
88%
**20
100%
Shooters World Heavy Pistol
<<locked>>
62%
35099
86%
**22
95%
[Somchem S265]*
<<locked>>
87%
35752
88%
**32
86%
Vihtavuori 3N38
<<locked>>
69%
34969
86%
**93
100%
Vihtavuori N105
<<locked>>
72%
34635
85%
**02
100%
Vihtavuori N110
<<locked>>
89%
35665
88%
**68
94%
Vihtavuori N32C Tin Star
<<locked>>
77%
34272
84%
**17
100%
Vihtavuori N350
<<locked>>
64%
35157
87%
**14
100%
[Winchester 296]*
<<locked>>
78%
34809
86%
**75
83%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
25280
62%
**09
100%
ADI APS 450
<<locked>>
61%
33707
83%
**14
100%
[Accurate 4100]*
<<locked>>
61%
22423
55%
**19
82%
[Accurate No. 11 FS]*
<<locked>>
79%
30545
75%
**83
80%
Accurate No. 9
<<locked>>
61%
32140
79%
**80
94%
Accurate TCM
<<locked>>
61%
32256
79%
**76
95%
[Alliant 2400]*
<<locked>>
61%
25469
63%
**78
88%
Alliant BLUE DOT
<<locked>>
61%
24860
61%
**42
94%
[Hodgdon H110]*
<<locked>>
70%
26731
66%
**27
82%
[Hodgdon LilGun]*
<<locked>>
63%
19131
47%
**96
81%
Hodgdon TrailBoss
<<locked>>
61%
13402
33%
**9
100%
Lovex D037.2
<<locked>>
61%
33040
81%
**89
94%
Maxam CSB 1
<<locked>>
61%
31981
79%
**79
100%
[Ramshot Enforcer]*
<<locked>>
61%
25440
63%
**88
89%
ReloadSwiss RS 14
<<locked>>
60%
12662
31%
**2
100%
[ReloadSwiss RS 30]*
<<locked>>
81%
23380
58%
**71
80%
Rottweil P 806
<<locked>>
61%
33866
83%
**57
100%
SNPE Vectan A0
<<locked>>
62%
32938
81%
**25
100%
[SNPE Vectan BA6 1/2]*
<<locked>>
67%
15693
39%
**1
81%
SNPE Vectan BA7 1/2
<<locked>>
61%
29370
72%
**42
100%
Shooters World Heavy Pistol
<<locked>>
61%
33040
81%
**89
94%
[Somchem S265]*
<<locked>>
76%
26397
65%
**75
80%
Vihtavuori 3N38
<<locked>>
61%
27209
67%
**75
98%
Vihtavuori N105
<<locked>>
61%
24410
60%
**48
99%
[Vihtavuori N110]*
<<locked>>
67%
18550
46%
**53
81%
Vihtavuori N32C Tin Star
<<locked>>
60%
23685
58%
**3
100%
Vihtavuori N350
<<locked>>
61%
32721
81%
**84
100%
[Winchester 296]*
<<locked>>
75%
31285
77%
**22
81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page