Load data for .30 PICRA + .308 | 150gr | Sierra SBT GameKing

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sierra SBT GameKing
Manufacturer SKU:	2125
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.096" \| 27.8mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.115" \| 53.7mm
Seated Depth:	0.272" \| 6.9mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5873_C311
Last updated:	2025-02-02
Recommended Twist Rate:	1:13 - 1:11

Load data for 56 loads in caliber .30 PICRA with .308 | 150gr | Sierra SBT GameKing bullet and 28 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	36216	89%	**73	100%
ADI APS 450	<<locked>>	64%	36289	89%	**50	100%
Accurate 4100	<<locked>>	74%	36143	89%	**62	91%
[Accurate No. 11 FS]*	<<locked>>	82%	35331	87%	**58	83%
Accurate No. 9	<<locked>>	63%	35389	87%	**32	96%
Accurate TCM	<<locked>>	63%	35636	88%	**32	97%
Alliant 2400	<<locked>>	71%	36187	89%	**65	94%
Alliant BLUE DOT	<<locked>>	74%	36376	90%	**32	99%
[Hodgdon H110]*	<<locked>>	78%	35752	88%	**85	88%
Hodgdon LilGun	<<locked>>	80%	36419	90%	**27	94%
Hodgdon TrailBoss	<<locked>>	96%	25135	62%	**8	100%
Lovex D037.2	<<locked>>	62%	35389	87%	**32	96%
Maxam CSB 1	<<locked>>	63%	34534	85%	**15	100%
Ramshot Enforcer	<<locked>>	71%	35897	88%	**62	94%
ReloadSwiss RS 14	<<locked>>	95%	23757	59%	**5	100%
ReloadSwiss RS 30	<<locked>>	95%	35056	86%	**98	90%
Rottweil P 806	<<locked>>	62%	36521	90%	**96	100%
SNPE Vectan A0	<<locked>>	64%	35230	87%	**61	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	34621	85%	**45	96%
SNPE Vectan BA7 1/2	<<locked>>	68%	36390	90%	**34	100%
Shooters World Heavy Pistol	<<locked>>	62%	35389	87%	**32	96%
[Somchem S265]*	<<locked>>	86%	36071	89%	**35	86%
Vihtavuori 3N38	<<locked>>	70%	35737	88%	**06	100%
Vihtavuori N105	<<locked>>	73%	36535	90%	**35	100%
Vihtavuori N110	<<locked>>	88%	36158	89%	**91	94%
Vihtavuori N32C Tin Star	<<locked>>	79%	35259	87%	**33	100%
Vihtavuori N350	<<locked>>	63%	35070	86%	**20	100%
[Winchester 296]*	<<locked>>	78%	36027	89%	**11	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	26063	64%	**25	100%
ADI APS 450	<<locked>>	61%	33721	83%	**24	100%
[Accurate 4100]*	<<locked>>	61%	23554	58%	**38	83%
[Accurate No. 11 FS]*	<<locked>>	77%	30226	74%	**83	80%
Accurate No. 9	<<locked>>	61%	33605	83%	**06	95%
Accurate TCM	<<locked>>	61%	33620	83%	**02	96%
[Alliant 2400]*	<<locked>>	61%	26063	64%	**91	88%
Alliant BLUE DOT	<<locked>>	61%	25730	63%	**65	95%
[Hodgdon H110]*	<<locked>>	68%	24831	61%	**94	80%
[Hodgdon LilGun]*	<<locked>>	61%	18637	46%	**83	81%
Hodgdon TrailBoss	<<locked>>	62%	13663	34%	**2	100%
Lovex D037.2	<<locked>>	61%	33605	83%	**06	95%
Maxam CSB 1	<<locked>>	60%	32126	79%	**86	100%
[Ramshot Enforcer]*	<<locked>>	61%	25846	64%	**94	89%
ReloadSwiss RS 14	<<locked>>	61%	13039	32%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	80%	23308	57%	**78	81%
Rottweil P 806	<<locked>>	61%	34389	85%	**70	100%
SNPE Vectan A0	<<locked>>	61%	32822	81%	**29	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	15171	37%	**8	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30211	74%	**52	100%
Shooters World Heavy Pistol	<<locked>>	61%	33605	83%	**06	95%
[Somchem S265]*	<<locked>>	75%	26614	66%	**81	81%
Vihtavuori 3N38	<<locked>>	61%	28021	69%	**94	99%
Vihtavuori N105	<<locked>>	61%	24424	60%	**52	100%
[Vihtavuori N110]*	<<locked>>	65%	17869	44%	**37	81%
Vihtavuori N32C Tin Star	<<locked>>	62%	24801	61%	**6	100%
Vihtavuori N350	<<locked>>	61%	32706	81%	**91	100%
[Winchester 296]*	<<locked>>	74%	30893	76%	**19	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.