Load data for .30 PICRA + .308 | 150gr | Sierra HPBT MatchKing

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sierra HPBT MatchKing
Manufacturer SKU:	2190
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.110" \| 28.2mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.129" \| 54.1mm
Seated Depth:	0.272" \| 6.9mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5870_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:13 - 1:11

Load data for 54 loads in caliber .30 PICRA with .308 | 150gr | Sierra HPBT MatchKing bullet and 27 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	35172	87%	**66	100%
ADI APS 450	<<locked>>	64%	36477	90%	**50	100%
Accurate 4100	<<locked>>	74%	35592	88%	**52	91%
[Accurate No. 11 FS]*	<<locked>>	84%	36405	90%	**75	84%
Accurate No. 9	<<locked>>	62%	34737	86%	**22	95%
Accurate TCM	<<locked>>	62%	34954	86%	**22	96%
Alliant 2400	<<locked>>	70%	34592	85%	**42	93%
Alliant BLUE DOT	<<locked>>	73%	35636	88%	**19	98%
[Hodgdon H110]*	<<locked>>	78%	35259	87%	**78	87%
Hodgdon LilGun	<<locked>>	79%	34940	86%	**98	93%
Hodgdon TrailBoss	<<locked>>	97%	25353	62%	**8	100%
Lovex D037.2	<<locked>>	62%	35868	88%	**45	96%
Maxam CSB 1	<<locked>>	64%	34650	85%	**19	100%
Ramshot Enforcer	<<locked>>	70%	35491	87%	**55	94%
ReloadSwiss RS 14	<<locked>>	95%	23888	59%	**5	100%
ReloadSwiss RS 30	<<locked>>	95%	35346	87%	**94	90%
SNPE Vectan A0	<<locked>>	64%	35389	87%	**65	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	34679	85%	**39	96%
SNPE Vectan BA7 1/2	<<locked>>	67%	35549	88%	**20	100%
Shooters World Heavy Pistol	<<locked>>	62%	35868	88%	**45	96%
[Somchem S265]*	<<locked>>	87%	36172	89%	**42	87%
Vihtavuori 3N38	<<locked>>	69%	34896	86%	**89	100%
Vihtavuori N105	<<locked>>	72%	34360	85%	**06	100%
Vihtavuori N110	<<locked>>	89%	36230	89%	**85	94%
Vihtavuori N32C Tin Star	<<locked>>	77%	34389	85%	**24	100%
Vihtavuori N350	<<locked>>	63%	35273	87%	**24	100%
[Winchester 296]*	<<locked>>	78%	35505	87%	**88	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	25324	62%	**15	100%
ADI APS 450	<<locked>>	61%	34026	84%	**27	100%
[Accurate 4100]*	<<locked>>	61%	22974	57%	**32	82%
[Accurate No. 11 FS]*	<<locked>>	79%	30980	76%	**96	81%
Accurate No. 9	<<locked>>	61%	32938	81%	**93	95%
Accurate TCM	<<locked>>	61%	32938	81%	**89	96%
[Alliant 2400]*	<<locked>>	61%	26237	65%	**91	88%
Alliant BLUE DOT	<<locked>>	61%	25106	62%	**45	94%
[Hodgdon H110]*	<<locked>>	69%	25889	64%	**07	81%
[Hodgdon LilGun]*	<<locked>>	61%	18536	46%	**86	81%
Hodgdon TrailBoss	<<locked>>	62%	13750	34%	**2	100%
Lovex D037.2	<<locked>>	61%	33823	83%	**16	95%
Maxam CSB 1	<<locked>>	61%	32256	79%	**89	100%
[Ramshot Enforcer]*	<<locked>>	61%	25367	62%	**91	89%
ReloadSwiss RS 14	<<locked>>	61%	13082	32%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	80%	23322	57%	**71	81%
SNPE Vectan A0	<<locked>>	61%	33098	82%	**32	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	15185	37%	**5	81%
SNPE Vectan BA7 1/2	<<locked>>	60%	29356	72%	**45	100%
Shooters World Heavy Pistol	<<locked>>	61%	33823	83%	**16	95%
[Somchem S265]*	<<locked>>	76%	26876	66%	**81	81%
Vihtavuori 3N38	<<locked>>	61%	27340	67%	**75	98%
Vihtavuori N105	<<locked>>	61%	24613	61%	**52	99%
[Vihtavuori N110]*	<<locked>>	65%	17898	44%	**33	81%
Vihtavuori N32C Tin Star	<<locked>>	60%	24076	59%	**2	100%
Vihtavuori N350	<<locked>>	61%	33040	81%	**91	100%
[Winchester 296]*	<<locked>>	73%	30356	75%	**06	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.