Load data for .30 PICRA + .308 | 150gr | Sellier & Bellot SPCE

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sellier & Bellot SPCE
Manufacturer SKU:	2936
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7223_C311
Last updated:	2026-02-08

Load data for 52 loads in caliber .30 PICRA with .308 | 150gr | Sellier & Bellot SPCE bullet and 26 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36289	89%	**80	100%
ADI APS 450	<<locked>>	63%	35781	88%	**47	100%
ADI AS 30	<<locked>>	62%	36477	90%	**79	100%
Accurate 4100	<<locked>>	73%	35650	88%	**62	91%
[Accurate No. 11 FS]*	<<locked>>	82%	36158	89%	**71	84%
Accurate TCM	<<locked>>	63%	36419	90%	**42	97%
Alliant 2400	<<locked>>	70%	36172	89%	**65	94%
Alliant BLUE DOT 👍	<<locked>>	73%	36347	90%	**42	99%
Alliant Herco	<<locked>>	71%	35607	88%	**94	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	75%	36230	89%	**09	100%
[Hodgdon H110]*	<<locked>>	77%	35853	88%	**88	88%
Hodgdon LilGun	<<locked>>	78%	35897	88%	**17	94%
Hodgdon TrailBoss	<<locked>>	95%	25005	62%	**8	100%
Maxam CSB 1	<<locked>>	65%	36260	89%	**42	100%
Ramshot Enforcer	<<locked>>	70%	35810	88%	**68	95%
ReloadSwiss RS 14	<<locked>>	95%	24424	60%	**5	100%
ReloadSwiss RS 30	<<locked>>	94%	35984	89%	**11	91%
SNPE Vectan A0	<<locked>>	64%	35737	88%	**71	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	35911	88%	**68	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35650	88%	**24	100%
[Somchem S265]*	<<locked>>	85%	36245	89%	**48	87%
Vihtavuori 3N38	<<locked>>	69%	35868	88%	**06	100%
Vihtavuori N105	<<locked>>	71%	35723	88%	**22	100%
Vihtavuori N110	<<locked>>	87%	35766	88%	**78	94%
Vihtavuori N32C Tin Star	<<locked>>	78%	35679	88%	**43	100%
[Winchester 296]*	<<locked>>	77%	36201	89%	**01	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26556	65%	**42	100%
ADI APS 450	<<locked>>	61%	34534	85%	**37	100%
ADI AS 30	<<locked>>	60%	35070	86%	**63	100%
[Accurate 4100]*	<<locked>>	61%	24381	60%	**55	83%
[Accurate No. 11 FS]*	<<locked>>	77%	30530	75%	**86	81%
Accurate TCM	<<locked>>	61%	34664	85%	**16	96%
[Alliant 2400]*	<<locked>>	61%	26948	66%	**14	89%
Alliant BLUE DOT	<<locked>>	61%	25802	64%	**68	95%
Alliant Herco	<<locked>>	61%	27760	68%	**86	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	26107	64%	**4	100%
[Hodgdon H110]*	<<locked>>	66%	25019	62%	**98	81%
[Hodgdon LilGun]*	<<locked>>	61%	19131	47%	**02	82%
Hodgdon TrailBoss	<<locked>>	76%	18159	45%	**3	100%
Maxam CSB 1	<<locked>>	61%	32909	81%	**96	100%
Ramshot Enforcer	<<locked>>	61%	26847	66%	**11	90%
ReloadSwiss RS 14	<<locked>>	74%	17318	43%	**0	100%
[ReloadSwiss RS 30]*	<<locked>>	78%	23003	57%	**68	80%
SNPE Vectan A0	<<locked>>	61%	33373	82%	**42	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	14939	37%	**5	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30705	76%	**65	100%
[Somchem S265]*	<<locked>>	74%	26440	65%	**75	80%
Vihtavuori 3N38	<<locked>>	61%	28297	70%	**91	99%
Vihtavuori N105	<<locked>>	61%	25672	63%	**71	100%
[Vihtavuori N110]*	<<locked>>	62%	17143	42%	**20	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	24671	61%	**6	100%
[Winchester 296]*	<<locked>>	72%	30501	75%	**09	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data