Load data for .30 PICRA + .308 | 150gr | Nosler Partition SP

Recommended Powder(s): Alliant BLUE DOT

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Nosler Partition SP
Manufacturer SKU:	16329
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.100" \| 27.9mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.219" \| 5.6mm
Shank Seated Depth:	0.219" \| 5.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4088_C311
Last updated:	2025-01-01

Load data for 52 loads in caliber .30 PICRA with .308 | 150gr | Nosler Partition SP bullet and 26 powders such as Alliant BLUE DOT. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	36143	89%	**70	100%
ADI APS 450	<<locked>>	64%	36216	89%	**50	100%
Accurate 4100	<<locked>>	74%	36013	89%	**58	91%
[Accurate No. 11 FS]*	<<locked>>	82%	35201	87%	**55	83%
Accurate No. 9	<<locked>>	63%	35505	87%	**35	96%
Accurate TCM	<<locked>>	63%	35737	88%	**32	97%
Alliant 2400	<<locked>>	70%	35375	87%	**42	93%
Alliant BLUE DOT 👍	<<locked>>	74%	36492	90%	**35	99%
[Hodgdon H110]*	<<locked>>	78%	35607	88%	**78	87%
Hodgdon LilGun	<<locked>>	80%	36274	89%	**24	94%
Hodgdon TrailBoss	<<locked>>	96%	25193	62%	**5	100%
Maxam CSB 1	<<locked>>	63%	34461	85%	**15	100%
Ramshot Enforcer	<<locked>>	71%	35998	89%	**62	94%
ReloadSwiss RS 14	<<locked>>	95%	23815	59%	**2	100%
ReloadSwiss RS 30	<<locked>>	95%	36158	89%	**04	90%
Rottweil P 806	<<locked>>	62%	36390	90%	**83	100%
SNPE Vectan A0	<<locked>>	64%	35172	87%	**61	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	34505	85%	**45	96%
SNPE Vectan BA7 1/2	<<locked>>	68%	36303	89%	**34	100%
[Somchem S265]*	<<locked>>	86%	35940	89%	**32	86%
Vihtavuori 3N38	<<locked>>	69%	35650	88%	**02	100%
Vihtavuori N105	<<locked>>	71%	34229	84%	**96	100%
Vihtavuori N110	<<locked>>	88%	36027	89%	**71	94%
Vihtavuori N32C Tin Star	<<locked>>	78%	35215	87%	**33	100%
Vihtavuori N350	<<locked>>	63%	34983	86%	**17	100%
[Winchester 296]*	<<locked>>	78%	35897	88%	**88	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	25991	64%	**22	100%
ADI APS 450	<<locked>>	61%	33678	83%	**24	100%
[Accurate 4100]*	<<locked>>	61%	23467	58%	**38	83%
[Accurate No. 11 FS]*	<<locked>>	79%	31546	78%	**89	81%
Accurate No. 9	<<locked>>	61%	33504	83%	**02	95%
Accurate TCM	<<locked>>	61%	33533	83%	**99	96%
[Alliant 2400]*	<<locked>>	61%	26687	66%	**01	88%
Alliant BLUE DOT	<<locked>>	61%	25657	63%	**61	95%
[Hodgdon H110]*	<<locked>>	69%	26324	65%	**17	81%
[Hodgdon LilGun]*	<<locked>>	61%	18565	46%	**79	80%
Hodgdon TrailBoss	<<locked>>	62%	13764	34%	**8	100%
Maxam CSB 1	<<locked>>	60%	32068	79%	**86	100%
[Ramshot Enforcer]*	<<locked>>	61%	25759	63%	**91	89%
ReloadSwiss RS 14	<<locked>>	61%	12995	32%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	80%	23859	59%	**84	81%
Rottweil P 806	<<locked>>	61%	34287	84%	**60	100%
SNPE Vectan A0	<<locked>>	61%	32750	81%	**29	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	15214	37%	**1	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30153	74%	**52	100%
[Somchem S265]*	<<locked>>	75%	26513	65%	**78	80%
Vihtavuori 3N38	<<locked>>	61%	27949	69%	**81	99%
Vihtavuori N105	<<locked>>	61%	24352	60%	**48	99%
[Vihtavuori N110]*	<<locked>>	65%	17927	44%	**37	81%
Vihtavuori N32C Tin Star	<<locked>>	62%	24845	61%	**2	100%
Vihtavuori N350	<<locked>>	61%	32619	80%	**91	100%
[Winchester 296]*	<<locked>>	74%	30777	76%	**12	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data