Load data for .30 PICRA + .308 | 150gr | Nosler Expansion Tip RN

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Nosler Expansion Tip RN
Manufacturer SKU:	59451
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.165" \| 29.6mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.284" \| 7.2mm
Shank Seated Depth:	0.182" \| 4.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4086_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 54 loads in caliber .30 PICRA with .308 | 150gr | Nosler Expansion Tip RN bullet and 27 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	35563	88%	**53	100%
ADI APS 450	<<locked>>	64%	35853	88%	**33	100%
Accurate 4100	<<locked>>	74%	36187	89%	**45	91%
[Accurate No. 11 FS]*	<<locked>>	83%	35244	87%	**48	83%
Accurate No. 9	<<locked>>	62%	34809	86%	**09	95%
Accurate TCM	<<locked>>	62%	34679	85%	**02	96%
Alliant 2400	<<locked>>	70%	34635	85%	**29	93%
Alliant BLUE DOT	<<locked>>	74%	36492	90%	**19	98%
[Hodgdon H110]*	<<locked>>	79%	35911	88%	**65	87%
Hodgdon LilGun	<<locked>>	80%	35288	87%	**94	93%
Hodgdon TrailBoss	<<locked>>	93%	24221	60%	**9	100%
Lovex D037.2	<<locked>>	63%	35766	88%	**29	96%
Maxam CSB 1	<<locked>>	63%	34490	85%	**06	100%
Ramshot Enforcer	<<locked>>	71%	35795	88%	**52	94%
ReloadSwiss RS 14	<<locked>>	96%	24743	61%	**5	100%
ReloadSwiss RS 30	<<locked>>	95%	35070	86%	**85	90%
SNPE Vectan A0	<<locked>>	64%	35172	87%	**45	100%
SNPE Vectan BA6 1/2	<<locked>>	97%	35302	87%	**35	96%
SNPE Vectan BA7 1/2	<<locked>>	68%	35868	88%	**14	100%
Shooters World Heavy Pistol	<<locked>>	63%	35766	88%	**29	96%
[Somchem S265]*	<<locked>>	85%	34998	86%	**06	85%
Vihtavuori 3N38	<<locked>>	70%	35766	88%	**86	100%
Vihtavuori N105	<<locked>>	72%	35230	87%	**02	100%
Vihtavuori N110	<<locked>>	87%	34650	85%	**55	93%
Vihtavuori N32C Tin Star	<<locked>>	79%	35607	88%	**20	100%
Vihtavuori N350	<<locked>>	63%	35578	88%	**14	100%
[Winchester 296]*	<<locked>>	79%	36100	89%	**88	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	25454	63%	**09	100%
ADI APS 450	<<locked>>	60%	33286	82%	**04	100%
[Accurate 4100]*	<<locked>>	61%	23395	58%	**25	82%
[Accurate No. 11 FS]*	<<locked>>	79%	31575	78%	**93	81%
Accurate No. 9	<<locked>>	61%	32909	81%	**89	95%
Accurate TCM	<<locked>>	61%	32793	81%	**80	96%
[Alliant 2400]*	<<locked>>	61%	26136	64%	**78	88%
Alliant BLUE DOT	<<locked>>	61%	25440	63%	**45	94%
[Hodgdon H110]*	<<locked>>	69%	26295	65%	**01	81%
[Hodgdon LilGun]*	<<locked>>	61%	18927	47%	**86	81%
Hodgdon TrailBoss	<<locked>>	62%	14185	35%	**5	100%
Lovex D037.2	<<locked>>	61%	33866	83%	**99	95%
Maxam CSB 1	<<locked>>	60%	31952	79%	**73	100%
[Ramshot Enforcer]*	<<locked>>	61%	25556	63%	**78	89%
ReloadSwiss RS 14	<<locked>>	61%	13445	33%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	81%	24178	60%	**78	81%
SNPE Vectan A0	<<locked>>	61%	32895	81%	**22	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	15519	38%	**8	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	29472	73%	**32	100%
Shooters World Heavy Pistol	<<locked>>	61%	33866	83%	**99	95%
[Somchem S265]*	<<locked>>	76%	27282	67%	**78	81%
Vihtavuori 3N38	<<locked>>	61%	27673	68%	**71	99%
Vihtavuori N105	<<locked>>	61%	24961	61%	**48	100%
[Vihtavuori N110]*	<<locked>>	65%	18028	44%	**33	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24860	61%	**2	100%
Vihtavuori N350	<<locked>>	61%	33025	81%	**84	100%
[Winchester 296]*	<<locked>>	74%	31125	77%	**09	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data