Load data for .30 PICRA + .308 | 150gr | Nosler CT FailSafe

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Nosler CT FailSafe
Manufacturer SKU:	53170
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.120" \| 28.4mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.239" \| 6.1mm
Shank Seated Depth:	0.239" \| 6.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4084_C311
Last updated:	2025-01-01

Load data for 46 loads in caliber .30 PICRA with .308 | 150gr | Nosler CT FailSafe bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35041	86%	**47	100%
Accurate 4100	<<locked>>	72%	35563	88%	**39	91%
[Accurate No. 11 FS]*	<<locked>>	82%	36419	90%	**65	84%
Accurate TCM	<<locked>>	62%	36506	90%	**35	97%
Alliant 2400	<<locked>>	70%	36448	90%	**52	94%
Alliant BLUE DOT	<<locked>>	72%	35969	89%	**19	99%
[Hodgdon H110]*	<<locked>>	77%	35578	88%	**68	87%
Hodgdon LilGun	<<locked>>	78%	35157	87%	**91	94%
Hodgdon TrailBoss	<<locked>>	96%	25860	64%	**2	100%
Maxam CSB 1	<<locked>>	64%	36303	89%	**22	100%
Ramshot Enforcer	<<locked>>	69%	35476	87%	**48	94%
ReloadSwiss RS 14	<<locked>>	96%	25527	63%	**2	100%
ReloadSwiss RS 30	<<locked>>	93%	35563	88%	**91	90%
SNPE Vectan A0	<<locked>>	63%	35708	88%	**55	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	34548	85%	**29	96%
SNPE Vectan BA7 1/2	<<locked>>	66%	35302	87%	**07	100%
[Somchem S265]*	<<locked>>	85%	36477	90%	**29	87%
Vihtavuori 3N38	<<locked>>	68%	35230	87%	**86	100%
Vihtavuori N105	<<locked>>	72%	36187	89%	**06	100%
Vihtavuori N110	<<locked>>	87%	36347	90%	**71	94%
Vihtavuori N32C Tin Star	<<locked>>	78%	35969	89%	**27	100%
Vihtavuori N350	<<locked>>	63%	36056	89%	**20	100%
[Winchester 296]*	<<locked>>	77%	35853	88%	**81	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	27021	67%	**29	100%
[Accurate 4100]*	<<locked>>	61%	24918	61%	**58	84%
[Accurate No. 11 FS]*	<<locked>>	77%	31546	78%	**80	81%
Accurate TCM	<<locked>>	61%	34621	85%	**06	96%
[Alliant 2400]*	<<locked>>	61%	27949	69%	**11	89%
Alliant BLUE DOT	<<locked>>	61%	27021	67%	**71	95%
[Hodgdon H110]*	<<locked>>	66%	25556	63%	**81	80%
[Hodgdon LilGun]*	<<locked>>	61%	20508	50%	**12	83%
Hodgdon TrailBoss	<<locked>>	60%	14286	35%	**2	100%
Maxam CSB 1	<<locked>>	62%	33794	83%	**93	100%
Ramshot Enforcer	<<locked>>	61%	27253	67%	**07	90%
ReloadSwiss RS 14	<<locked>>	62%	14446	36%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	78%	23873	59%	**65	81%
SNPE Vectan A0	<<locked>>	61%	33344	82%	**29	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	15084	37%	**2	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	31169	77%	**52	100%
[Somchem S265]*	<<locked>>	74%	27354	67%	**75	81%
Vihtavuori 3N38	<<locked>>	61%	29428	72%	**98	99%
Vihtavuori N105	<<locked>>	61%	26121	64%	**65	100%
[Vihtavuori N110]*	<<locked>>	61%	17680	44%	**14	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	25585	63%	**9	100%
Vihtavuori N350	<<locked>>	61%	33953	84%	**94	100%
[Winchester 296]*	<<locked>>	72%	31183	77%	**06	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data