Load data for .30 PICRA + .308 | 150gr | Hornady SP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Hornady SP
Manufacturer SKU:	3031
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.047" \| 26.6mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.166" \| 4.2mm
Shank Seated Depth:	0.166" \| 4.2mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B2671_C311
Last updated:	2025-01-01

Load data for 46 loads in caliber .30 PICRA with .308 | 150gr | Hornady SP bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35940	89%	**80	100%
Accurate 4100	<<locked>>	73%	36347	90%	**68	91%
[Accurate No. 11 FS]*	<<locked>>	81%	34824	86%	**48	83%
Accurate TCM	<<locked>>	62%	35926	88%	**39	97%
Alliant 2400	<<locked>>	69%	35694	88%	**62	94%
Alliant BLUE DOT	<<locked>>	71%	35012	86%	**19	98%
[Hodgdon H110]*	<<locked>>	78%	36492	90%	**94	88%
Hodgdon LilGun	<<locked>>	78%	35505	87%	**14	94%
Hodgdon TrailBoss	<<locked>>	94%	24772	61%	**8	100%
Maxam CSB 1	<<locked>>	64%	36100	89%	**35	100%
Ramshot Enforcer	<<locked>>	69%	35259	87%	**65	95%
ReloadSwiss RS 14	<<locked>>	97%	25048	62%	**8	100%
ReloadSwiss RS 30	<<locked>>	94%	35665	88%	**11	91%
SNPE Vectan A0	<<locked>>	63%	35418	87%	**65	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	36318	89%	**68	97%
SNPE Vectan BA7 1/2	<<locked>>	67%	36289	89%	**34	100%
[Somchem S265]*	<<locked>>	85%	36448	90%	**45	87%
Vihtavuori 3N38	<<locked>>	67%	34635	85%	**96	100%
Vihtavuori N105	<<locked>>	71%	35244	87%	**19	100%
Vihtavuori N110	<<locked>>	87%	36289	89%	**81	94%
Vihtavuori N32C Tin Star	<<locked>>	79%	36521	90%	**50	100%
Vihtavuori N350	<<locked>>	63%	36245	89%	**34	100%
[Winchester 296]*	<<locked>>	76%	34969	86%	**91	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26411	65%	**35	100%
[Accurate 4100]*	<<locked>>	61%	23975	59%	**48	83%
[Accurate No. 11 FS]*	<<locked>>	76%	30008	74%	**80	80%
Accurate TCM	<<locked>>	61%	34214	84%	**12	96%
[Alliant 2400]*	<<locked>>	61%	27398	67%	**24	89%
Alliant BLUE DOT	<<locked>>	61%	26513	65%	**75	95%
[Hodgdon H110]*	<<locked>>	66%	24526	60%	**88	80%
[Hodgdon LilGun]*	<<locked>>	61%	19493	48%	**02	82%
Hodgdon TrailBoss	<<locked>>	61%	13764	34%	**2	100%
Maxam CSB 1	<<locked>>	62%	33692	83%	**09	100%
Ramshot Enforcer	<<locked>>	61%	27079	67%	**14	90%
ReloadSwiss RS 14	<<locked>>	60%	13111	32%	**8	100%
[ReloadSwiss RS 30]*	<<locked>>	77%	22785	56%	**65	80%
SNPE Vectan A0	<<locked>>	61%	33112	82%	**42	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	14881	37%	**5	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30269	75%	**58	100%
[Somchem S265]*	<<locked>>	73%	26136	64%	**68	80%
Vihtavuori 3N38	<<locked>>	61%	28906	71%	**04	99%
Vihtavuori N105	<<locked>>	61%	25643	63%	**71	100%
[Vihtavuori N110]*	<<locked>>	63%	17492	43%	**27	80%
Vihtavuori N32C Tin Star	<<locked>>	60%	24482	60%	**6	100%
Vihtavuori N350	<<locked>>	61%	34142	84%	**11	100%
[Winchester 296]*	<<locked>>	72%	30153	74%	**02	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.