Load data for .30 PICRA + .308 | 150gr | Hornady BTSP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Hornady BTSP
Manufacturer SKU:	3033
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.044" \| 26.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.073" \| 52.6mm
Seated Depth:	0.262" \| 6.7mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B2666_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:14 - 1:11

Load data for 56 loads in caliber .30 PICRA with .308 | 150gr | Hornady BTSP bullet and 28 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	34809	86%	**57	100%
ADI APS 450	<<locked>>	64%	35824	88%	**43	100%
Accurate 4100	<<locked>>	74%	35389	87%	**39	90%
[Accurate No. 11 FS]*	<<locked>>	84%	36419	90%	**65	83%
Accurate No. 9	<<locked>>	63%	34780	86%	**22	95%
Accurate TCM	<<locked>>	63%	34737	86%	**16	96%
Alliant 2400	<<locked>>	72%	36521	90%	**62	94%
Alliant BLUE DOT	<<locked>>	73%	35331	87%	**12	98%
[Hodgdon H110]*	<<locked>>	79%	34998	86%	**65	87%
Hodgdon LilGun	<<locked>>	80%	35737	88%	**11	94%
Hodgdon TrailBoss	<<locked>>	96%	24874	61%	**9	100%
Lovex D037.2	<<locked>>	63%	35679	88%	**29	96%
Maxam CSB 1	<<locked>>	63%	34142	84%	**06	100%
Ramshot Enforcer	<<locked>>	71%	35186	87%	**52	94%
ReloadSwiss RS 14	<<locked>>	97%	24381	60%	**8	100%
ReloadSwiss RS 30	<<locked>>	96%	35273	87%	**98	90%
Rottweil P 806	<<locked>>	63%	36347	90%	**89	100%
SNPE Vectan A0	<<locked>>	64%	34809	86%	**52	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	34722	86%	**45	96%
SNPE Vectan BA7 1/2	<<locked>>	68%	36419	90%	**30	100%
Shooters World Heavy Pistol	<<locked>>	63%	35679	88%	**29	96%
[Somchem S265]*	<<locked>>	87%	36129	89%	**32	86%
Vihtavuori 3N38	<<locked>>	69%	34679	85%	**83	100%
Vihtavuori N105	<<locked>>	74%	36347	90%	**22	100%
Vihtavuori N110	<<locked>>	89%	36230	89%	**75	94%
Vihtavuori N32C Tin Star	<<locked>>	78%	35027	86%	**24	100%
Vihtavuori N350	<<locked>>	63%	34954	86%	**14	100%
[Winchester 296]*	<<locked>>	78%	35462	87%	**94	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	24976	61%	**09	100%
ADI APS 450	<<locked>>	60%	33330	82%	**10	100%
[Accurate 4100]*	<<locked>>	61%	22945	57%	**22	82%
[Accurate No. 11 FS]*	<<locked>>	79%	31111	77%	**89	80%
Accurate No. 9	<<locked>>	61%	32938	81%	**93	95%
Accurate TCM	<<locked>>	61%	32909	81%	**86	96%
[Alliant 2400]*	<<locked>>	61%	25947	64%	**81	88%
Alliant BLUE DOT	<<locked>>	61%	24801	61%	**42	94%
[Hodgdon H110]*	<<locked>>	69%	25715	63%	**07	81%
[Hodgdon LilGun]*	<<locked>>	62%	19014	47%	**93	81%
Hodgdon TrailBoss	<<locked>>	61%	13329	33%	**9	100%
Lovex D037.2	<<locked>>	61%	33866	83%	**02	95%
Maxam CSB 1	<<locked>>	60%	31691	78%	**76	100%
[Ramshot Enforcer]*	<<locked>>	61%	25150	62%	**84	89%
ReloadSwiss RS 14	<<locked>>	62%	13256	33%	**8	100%
[ReloadSwiss RS 30]*	<<locked>>	80%	23279	57%	**71	80%
Rottweil P 806	<<locked>>	61%	34403	85%	**66	100%
SNPE Vectan A0	<<locked>>	61%	32489	80%	**25	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	65%	15055	37%	**8	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30081	74%	**45	100%
Shooters World Heavy Pistol	<<locked>>	61%	33866	83%	**02	95%
[Somchem S265]*	<<locked>>	76%	26701	66%	**78	80%
Vihtavuori 3N38	<<locked>>	61%	26992	66%	**61	98%
Vihtavuori N105	<<locked>>	61%	24178	60%	**45	99%
[Vihtavuori N110]*	<<locked>>	65%	17724	44%	**27	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	24511	60%	**6	100%
Vihtavuori N350	<<locked>>	61%	32518	80%	**84	100%
[Winchester 296]*	<<locked>>	75%	31720	78%	**25	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.