Load data for .30 PICRA + .308 | 150gr | Ferrobull Entox Sport

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Ferrobull Entox Sport
Manufacturer SKU:	S-30-150
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.209" \| 30.7mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.328" \| 8.3mm
Shank Seated Depth:	0.030" \| 0.8mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B9051_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:9

Load data for 46 loads in caliber .30 PICRA with .308 | 150gr | Ferrobull Entox Sport bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35781	88%	**86	100%
ADI APS 450	<<locked>>	64%	36332	89%	**70	100%
Accurate 4100	<<locked>>	72%	35085	86%	**65	91%
[Accurate No. 11 FS]*	<<locked>>	81%	35534	87%	**88	84%
Alliant 2400	<<locked>>	69%	35679	88%	**71	94%
Alliant BLUE DOT	<<locked>>	71%	34824	86%	**39	99%
[Hodgdon H110]*	<<locked>>	77%	36201	89%	**11	89%
Hodgdon LilGun	<<locked>>	78%	35215	87%	**17	94%
Hodgdon TrailBoss	<<locked>>	94%	24540	60%	**2	100%
Maxam CSB 1	<<locked>>	64%	35810	88%	**45	100%
Ramshot Enforcer	<<locked>>	69%	35288	87%	**71	95%
ReloadSwiss RS 14	<<locked>>	94%	24120	59%	**1	100%
ReloadSwiss RS 30	<<locked>>	93%	35433	87%	**17	91%
SNPE Vectan A0	<<locked>>	64%	36390	90%	**88	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	36114	89%	**75	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35012	86%	**27	100%
[Somchem S265]*	<<locked>>	85%	36376	90%	**65	87%
Vihtavuori 3N38	<<locked>>	69%	36274	89%	**29	100%
Vihtavuori N105	<<locked>>	71%	35070	86%	**22	100%
Vihtavuori N110	<<locked>>	87%	36332	89%	**04	95%
Vihtavuori N32C Tin Star	<<locked>>	78%	35215	87%	**47	100%
Vihtavuori N350	<<locked>>	63%	36071	89%	**47	100%
[Winchester 296]*	<<locked>>	76%	34679	85%	**94	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26194	65%	**45	100%
ADI APS 450	<<locked>>	61%	34011	84%	**40	100%
[Accurate 4100]*	<<locked>>	61%	24410	60%	**75	84%
[Accurate No. 11 FS]*	<<locked>>	75%	28950	71%	**73	80%
[Alliant 2400]*	<<locked>>	61%	27253	67%	**27	89%
Alliant BLUE DOT	<<locked>>	61%	26252	65%	**88	95%
[Hodgdon H110]*	<<locked>>	66%	24511	60%	**94	80%
[Hodgdon LilGun]*	<<locked>>	61%	19493	48%	**19	82%
Hodgdon TrailBoss	<<locked>>	61%	13692	34%	**8	100%
Maxam CSB 1	<<locked>>	61%	33562	83%	**19	100%
Ramshot Enforcer	<<locked>>	61%	26905	66%	**30	90%
ReloadSwiss RS 14	<<locked>>	62%	13721	34%	**8	100%
[ReloadSwiss RS 30]*	<<locked>>	77%	22640	56%	**78	81%
SNPE Vectan A0	<<locked>>	62%	34229	84%	**65	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	14779	36%	**1	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	31111	77%	**81	100%
[Somchem S265]*	<<locked>>	73%	25918	64%	**81	81%
Vihtavuori 3N38	<<locked>>	61%	28776	71%	**17	99%
Vihtavuori N105	<<locked>>	61%	25338	62%	**81	100%
[Vihtavuori N110]*	<<locked>>	62%	17361	43%	**37	81%
Vihtavuori N32C Tin Star	<<locked>>	62%	25280	62%	**5	100%
Vihtavuori N350	<<locked>>	61%	33823	83%	**14	100%
[Winchester 296]*	<<locked>>	71%	29892	74%	**19	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.