Load data for .30 PICRA + .308 | 150gr | CutEdge Maximus

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| CutEdge Maximus
Manufacturer SKU:	Maximus
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.248" \| 31.7mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.367" \| 9.3mm
Shank Seated Depth:	0.131" \| 3.3mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B8479_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:11 - 1:9

Load data for 64 loads in caliber .30 PICRA with .308 | 150gr | CutEdge Maximus bullet and 32 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	77%	36274	89%	**63	100%
ADI APS 450	<<locked>>	65%	35984	89%	**30	100%
Accurate 4100	<<locked>>	77%	35273	87%	**42	90%
Accurate No. 9	<<locked>>	66%	36260	89%	**35	96%
Accurate Solo 1250	<<locked>>	64%	35389	87%	**19	100%
Accurate TCM	<<locked>>	66%	36143	89%	**25	96%
Alliant 2400	<<locked>>	74%	35940	88%	**45	93%
Alliant BLUE DOT	<<locked>>	76%	35781	88%	**22	98%
[Hodgdon H110]*	<<locked>>	82%	34795	86%	**65	86%
Hodgdon LilGun	<<locked>>	83%	35143	87%	**07	93%
Hodgdon TrailBoss	<<locked>>	95%	23032	57%	**2	100%
Lovex D037.2	<<locked>>	65%	35099	86%	**25	95%
Maxam CSB 1	<<locked>>	68%	36535	90%	**29	100%
Ramshot Enforcer	<<locked>>	73%	34737	86%	**35	93%
ReloadSwiss RS 14	<<locked>>	93%	21582	53%	**6	100%
ReloadSwiss RS 20	<<locked>>	64%	36129	89%	**75	100%
ReloadSwiss RS 24	<<locked>>	63%	34867	86%	**93	99%
[ReloadSwiss RS 30]*	<<locked>>	96%	32721	81%	**45	88%
Rottweil P 806	<<locked>>	65%	35012	86%	**70	100%
SNPE Vectan A0	<<locked>>	67%	36216	89%	**61	100%
SNPE Vectan BA6 1/2	<<locked>>	97%	31647	78%	**96	94%
SNPE Vectan BA7 1/2	<<locked>>	68%	34418	85%	**01	100%
Shooters World Heavy Pistol	<<locked>>	65%	35099	86%	**25	95%
[Somchem S265]*	<<locked>>	90%	36071	89%	**29	86%
Vihtavuori 3N37	<<locked>>	64%	36172	89%	**30	100%
Vihtavuori 3N38	<<locked>>	72%	34969	86%	**86	100%
Vihtavuori N105 👍	<<locked>>	77%	36274	89%	**19	100%
Vihtavuori N110	<<locked>>	91%	34693	85%	**62	93%
Vihtavuori N32C Tin Star	<<locked>>	82%	36303	89%	**30	100%
Vihtavuori N340	<<locked>>	63%	36448	90%	**68	100%
Vihtavuori N350	<<locked>>	66%	35969	89%	**24	100%
[Winchester 296]*	<<locked>>	82%	35172	87%	**78	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	23540	58%	**76	100%
ADI APS 450	<<locked>>	61%	33156	82%	**01	100%
[Accurate 4100]*	<<locked>>	63%	21886	54%	**06	81%
Accurate No. 9	<<locked>>	61%	30284	75%	**47	93%
Accurate Solo 1250	<<locked>>	61%	32779	81%	**86	100%
Accurate TCM	<<locked>>	61%	30139	74%	**37	94%
[Alliant 2400]*	<<locked>>	61%	23235	57%	**32	85%
Alliant BLUE DOT	<<locked>>	61%	22495	55%	**93	92%
[Hodgdon H110]*	<<locked>>	73%	26179	64%	**14	80%
[Hodgdon LilGun]*	<<locked>>	66%	18811	46%	**96	80%
Hodgdon TrailBoss	<<locked>>	62%	12734	31%	**9	100%
Lovex D037.2	<<locked>>	61%	31227	77%	**60	93%
Maxam CSB 1	<<locked>>	62%	31183	77%	**66	100%
[Ramshot Enforcer]*	<<locked>>	61%	22423	55%	**29	86%
ReloadSwiss RS 14	<<locked>>	61%	11966	29%	**2	100%
ReloadSwiss RS 20	<<locked>>	61%	33359	82%	**42	100%
ReloadSwiss RS 24	<<locked>>	61%	32401	80%	**63	99%
[ReloadSwiss RS 30]*	<<locked>>	86%	24627	61%	**91	81%
Rottweil P 806	<<locked>>	61%	31009	76%	**17	100%
SNPE Vectan A0	<<locked>>	61%	30980	76%	**99	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	72%	16331	40%	**4	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	27789	68%	**12	100%
Shooters World Heavy Pistol	<<locked>>	61%	31227	77%	**60	93%
[Somchem S265]*	<<locked>>	80%	27499	68%	**84	80%
Vihtavuori 3N37	<<locked>>	61%	33663	83%	**04	100%
Vihtavuori 3N38	<<locked>>	60%	24700	61%	**25	97%
Vihtavuori N105	<<locked>>	61%	21495	53%	**96	98%
[Vihtavuori N110]*	<<locked>>	70%	18115	45%	**43	80%
Vihtavuori N32C Tin Star	<<locked>>	60%	22568	56%	**9	100%
Vihtavuori N340	<<locked>>	61%	33721	83%	**38	100%
Vihtavuori N350	<<locked>>	61%	31009	76%	**65	100%
[Winchester 296]*	<<locked>>	78%	31009	76%	**16	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.