Load data for .30 PICRA + .308 | 147gr | Winchester FMJ Match

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 147gr \| Winchester FMJ Match
Bullet Weight:	147gr \| 9.5g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.000" \| 25.4mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.169" \| 55.1mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6629_C311
Last updated:	2025-01-01

Load data for 44 loads in caliber .30 PICRA with .308 | 147gr | Winchester FMJ Match bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	35839	88%	**93	100%
Accurate 4100	<<locked>>	72%	35360	87%	**68	90%
[Accurate No. 11 FS]*	<<locked>>	81%	35331	87%	**75	83%
Alliant 2400	<<locked>>	69%	36274	89%	**85	94%
Alliant BLUE DOT	<<locked>>	72%	36521	90%	**58	99%
[Hodgdon H110]*	<<locked>>	77%	36260	89%	**14	88%
Hodgdon LilGun	<<locked>>	77%	35491	87%	**24	94%
Hodgdon TrailBoss	<<locked>>	93%	24424	60%	**8	100%
Maxam CSB 1	<<locked>>	63%	35389	87%	**52	100%
Ramshot Enforcer	<<locked>>	69%	35607	88%	**78	94%
ReloadSwiss RS 14	<<locked>>	96%	24801	61%	**1	100%
ReloadSwiss RS 30	<<locked>>	94%	36230	89%	**37	91%
SNPE Vectan A0	<<locked>>	63%	35708	88%	**88	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	36216	89%	**85	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35259	87%	**40	100%
[Somchem S265]*	<<locked>>	84%	35607	88%	**58	86%
Vihtavuori 3N38	<<locked>>	68%	36100	89%	**39	100%
Vihtavuori N105	<<locked>>	71%	36071	89%	**42	100%
Vihtavuori N110	<<locked>>	86%	36463	90%	**01	94%
Vihtavuori N32C Tin Star	<<locked>>	76%	34679	85%	**50	100%
Vihtavuori N350	<<locked>>	63%	36347	89%	**60	100%
[Winchester 296]*	<<locked>>	75%	34853	86%	**01	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26614	66%	**55	100%
[Accurate 4100]*	<<locked>>	61%	24976	61%	**84	84%
[Accurate No. 11 FS]*	<<locked>>	76%	30734	76%	**99	80%
[Alliant 2400]*	<<locked>>	61%	27992	69%	**43	89%
Alliant BLUE DOT	<<locked>>	61%	26397	65%	**91	95%
[Hodgdon H110]*	<<locked>>	67%	26194	64%	**37	81%
[Hodgdon LilGun]*	<<locked>>	61%	19914	49%	**25	82%
Hodgdon TrailBoss	<<locked>>	61%	13895	34%	**5	100%
Maxam CSB 1	<<locked>>	61%	33112	82%	**19	100%
Ramshot Enforcer	<<locked>>	61%	27572	68%	**40	90%
ReloadSwiss RS 14	<<locked>>	60%	13169	32%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	78%	23525	58%	**01	81%
SNPE Vectan A0	<<locked>>	61%	33504	82%	**58	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	15316	38%	**5	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	31372	77%	**94	100%
[Somchem S265]*	<<locked>>	72%	25875	64%	**88	80%
Vihtavuori 3N38	<<locked>>	61%	28964	71%	**24	99%
Vihtavuori N105	<<locked>>	61%	26571	65%	**98	100%
[Vihtavuori N110]*	<<locked>>	63%	17985	44%	**53	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	25092	62%	**8	100%
Vihtavuori N350	<<locked>>	61%	34185	84%	**30	100%
[Winchester 296]*	<<locked>>	72%	31792	78%	**48	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data