Load data for .30 PICRA + .308 | 146gr | Norma FMJ Spitz

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 146gr \| Norma FMJ Spitz
Manufacturer SKU:	67651
Bullet Weight:	146gr \| 9.5g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.110" \| 28.2mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.098" \| 53.3mm
Seated Depth:	0.303" \| 7.7mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3859_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 58 loads in caliber .30 PICRA with .308 | 146gr | Norma FMJ Spitz bullet and 29 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	34563	85%	**60	100%
ADI APS 450	<<locked>>	64%	35853	88%	**50	100%
[Accurate 4100]*	<<locked>>	75%	34606	85%	**39	89%
[Accurate No. 11 FS]*	<<locked>>	85%	35694	88%	**68	82%
Accurate No. 9	<<locked>>	65%	35491	87%	**42	95%
Accurate Solo 1250	<<locked>>	63%	35360	87%	**38	100%
Accurate TCM	<<locked>>	65%	35868	88%	**39	96%
Alliant 2400	<<locked>>	72%	35346	87%	**65	93%
Alliant BLUE DOT	<<locked>>	76%	36361	90%	**45	98%
[Hodgdon H110]*	<<locked>>	80%	35128	86%	**78	86%
Hodgdon LilGun	<<locked>>	83%	36521	90%	**44	94%
Hodgdon TrailBoss	<<locked>>	97%	24482	60%	**5	100%
Lovex D037.2	<<locked>>	64%	35491	87%	**42	95%
Maxam CSB 1	<<locked>>	67%	36390	90%	**48	100%
Ramshot Enforcer	<<locked>>	73%	36114	89%	**78	94%
ReloadSwiss RS 14	<<locked>>	92%	22133	54%	**5	100%
ReloadSwiss RS 24	<<locked>>	63%	35534	88%	**22	99%
[ReloadSwiss RS 30]*	<<locked>>	97%	34722	85%	**01	89%
Rottweil P 806	<<locked>>	64%	36274	89%	**06	100%
SNPE Vectan A0	<<locked>>	66%	35998	89%	**75	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	32097	79%	**19	94%
SNPE Vectan BA7 1/2	<<locked>>	68%	35143	87%	**27	100%
Shooters World Heavy Pistol	<<locked>>	64%	35491	87%	**42	95%
[Somchem S265]*	<<locked>>	88%	35505	87%	**35	85%
Vihtavuori 3N38	<<locked>>	70%	34606	85%	**02	100%
Vihtavuori N105	<<locked>>	74%	34925	86%	**22	100%
Vihtavuori N110	<<locked>>	90%	35215	87%	**85	93%
Vihtavuori N32C Tin Star	<<locked>>	79%	35143	87%	**33	100%
Vihtavuori N350	<<locked>>	64%	34577	85%	**27	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	24540	60%	**12	100%
ADI APS 450	<<locked>>	61%	33156	82%	**20	100%
[Accurate 4100]*	<<locked>>	61%	22002	54%	**15	80%
[Accurate No. 11 FS]*	<<locked>>	82%	32053	79%	**16	80%
Accurate No. 9	<<locked>>	61%	31763	78%	**89	94%
Accurate Solo 1250	<<locked>>	60%	32851	81%	**09	100%
Accurate TCM	<<locked>>	61%	31676	78%	**83	95%
[Alliant 2400]*	<<locked>>	61%	25048	62%	**75	86%
Alliant BLUE DOT	<<locked>>	60%	23670	58%	**25	93%
[Hodgdon H110]*	<<locked>>	72%	26716	66%	**37	80%
[Hodgdon LilGun]*	<<locked>>	66%	20334	50%	**42	82%
Hodgdon TrailBoss	<<locked>>	60%	12865	32%	**5	100%
Lovex D037.2	<<locked>>	61%	31763	78%	**89	94%
Maxam CSB 1	<<locked>>	61%	31357	77%	**86	100%
[Ramshot Enforcer]*	<<locked>>	61%	24047	59%	**68	87%
ReloadSwiss RS 14	<<locked>>	61%	12792	32%	**8	100%
ReloadSwiss RS 24	<<locked>>	61%	33243	82%	**96	99%
[ReloadSwiss RS 30]*	<<locked>>	85%	25092	62%	**17	81%
Rottweil P 806	<<locked>>	61%	32126	79%	**57	100%
SNPE Vectan A0	<<locked>>	60%	31053	76%	**19	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	70%	16331	40%	**1	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	28703	71%	**42	100%
Shooters World Heavy Pistol	<<locked>>	61%	31763	78%	**89	94%
[Somchem S265]*	<<locked>>	80%	28761	71%	**20	81%
Vihtavuori 3N38	<<locked>>	61%	26600	65%	**75	98%
Vihtavuori N105	<<locked>>	61%	22800	56%	**35	99%
[Vihtavuori N110]*	<<locked>>	67%	18043	44%	**56	80%
Vihtavuori N32C Tin Star	<<locked>>	62%	24134	59%	**9	100%
Vihtavuori N350	<<locked>>	62%	32097	79%	**98	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.