Load data for .30 PICRA + .308 | 139gr | IBEX TRD

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 139gr \| IBEX TRD
Manufacturer SKU:	T9006
Bullet Weight:	139gr \| 9.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.142" \| 29.0mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.261" \| 6.6mm
Shank Seated Depth:	0.174" \| 4.4mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7016_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 50 loads in caliber .30 PICRA with .308 | 139gr | IBEX TRD bullet and 25 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	35679	88%	**12	100%
ADI APS 450	<<locked>>	64%	36390	90%	**86	100%
[Accurate 4100]*	<<locked>>	73%	35462	87%	**85	89%
Accurate No. 9	<<locked>>	63%	35853	88%	**81	95%
Accurate TCM	<<locked>>	63%	36056	89%	**78	96%
Alliant 2400	<<locked>>	70%	35940	89%	**94	92%
Alliant BLUE DOT	<<locked>>	74%	36506	90%	**71	98%
[Hodgdon H110]*	<<locked>>	78%	36405	90%	**27	86%
Hodgdon LilGun	<<locked>>	79%	34853	86%	**34	92%
Hodgdon TrailBoss	<<locked>>	97%	26107	64%	**1	100%
Lovex D037.2	<<locked>>	62%	35853	88%	**81	95%
Maxam CSB 1	<<locked>>	64%	35041	86%	**55	100%
Ramshot Enforcer	<<locked>>	70%	34983	86%	**78	93%
ReloadSwiss RS 14	<<locked>>	95%	24685	61%	**1	100%
[ReloadSwiss RS 30]*	<<locked>>	96%	36390	90%	**57	89%
SNPE Vectan A0	<<locked>>	64%	35679	88%	**01	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	34983	86%	**88	95%
SNPE Vectan BA7 1/2	<<locked>>	68%	36085	89%	**63	100%
Shooters World Heavy Pistol	<<locked>>	62%	35853	88%	**81	95%
[Somchem S265]*	<<locked>>	85%	35302	87%	**52	84%
Vihtavuori 3N38	<<locked>>	69%	35911	88%	**45	100%
Vihtavuori N105	<<locked>>	72%	35563	88%	**55	100%
Vihtavuori N110	<<locked>>	87%	34679	85%	**01	92%
Vihtavuori N32C Tin Star	<<locked>>	79%	36158	89%	**70	100%
Vihtavuori N350	<<locked>>	63%	35969	89%	**70	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26049	64%	**55	100%
ADI APS 450	<<locked>>	61%	33765	83%	**53	100%
[Accurate 4100]*	<<locked>>	61%	24685	61%	**84	82%
Accurate No. 9	<<locked>>	61%	33982	84%	**52	94%
Accurate TCM	<<locked>>	61%	34156	84%	**48	95%
[Alliant 2400]*	<<locked>>	61%	27644	68%	**40	87%
Alliant BLUE DOT	<<locked>>	61%	26150	64%	**98	94%
[Hodgdon H110]*	<<locked>>	69%	27108	67%	**60	80%
[Hodgdon LilGun]*	<<locked>>	61%	20175	50%	**48	81%
Hodgdon TrailBoss	<<locked>>	61%	14605	36%	**5	100%
Lovex D037.2	<<locked>>	61%	33982	84%	**52	94%
Maxam CSB 1	<<locked>>	61%	32721	81%	**25	100%
[Ramshot Enforcer]*	<<locked>>	61%	26919	66%	**37	88%
ReloadSwiss RS 14	<<locked>>	60%	13967	34%	**1	100%
[ReloadSwiss RS 30]*	<<locked>>	83%	26005	64%	**50	81%
SNPE Vectan A0	<<locked>>	61%	33301	82%	**68	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	63%	15795	39%	**1	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30255	75%	**88	100%
Shooters World Heavy Pistol	<<locked>>	61%	33982	84%	**52	94%
[Somchem S265]*	<<locked>>	77%	29153	72%	**50	81%
Vihtavuori 3N38	<<locked>>	61%	28442	70%	**27	98%
Vihtavuori N105	<<locked>>	61%	26208	65%	**04	99%
[Vihtavuori N110]*	<<locked>>	63%	18449	45%	**66	80%
Vihtavuori N32C Tin Star	<<locked>>	62%	25860	64%	**8	100%
Vihtavuori N350	<<locked>>	61%	33417	82%	**30	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.