Load data for .30 Picra + .307 | 150gr | Rhino Solid Shank

.30 Picra cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:150 gr
Bullet Diameter:0.307"
Bullet Length:<<locked>>
Case Length (l3):1.291"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:24.23 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:5"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:16.5

Load data in caliber .30 Picra with .307 | 150gr | Rhino Solid Shank bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate 4100*²<<locked>>72%35,085 psi86%1296 fps88.9%
ADI AP 100²<<locked>>72%35,447 psi87%1230 fps100%
Alliant 2400*²<<locked>>68%34,592 psi85%1289 fps91.6%
Alliant BLUE DOT²<<locked>>72%35,940 psi89%1286 fps97.8%
Alliant Herco²<<locked>>72%36,172 psi89%1165 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>72%33,736 psi83%1050 fps100%
Hodgdon Clays²<<locked>>68%34,156 psi84%1004 fps100%
Hodgdon LilGun*²<<locked>>76%33,895 psi83%1325 fps91.2%
Hodgdon TrailBossᴾ<<locked>>100%26,818 psi66%928 fps100%
Maxam CSB 1²<<locked>>64%35,955 psi89%1106 fps100%
Ramshot Enforcer*²<<locked>>68%34,476 psi85%1289 fps92.5%
ReloadSwiss RS 14ᴾ<<locked>>100%26,484 psi65%951 fps100%
ReloadSwiss RS 30*<<locked>>92%34,519 psi85%1335 fps88%
SNPE Vectan A0²<<locked>>64%36,274 psi89%1145 fps100%
SNPE Vectan BA6 1/2<<locked>>96%36,738 psi90%1322 fps95.7%
SNPE Vectan BA7 1/2²<<locked>>64%33,605 psi83%1168 fps100%
Vihtavuori 3N38²<<locked>>68%33,953 psi84%1240 fps99.5%
Vihtavuori N105²<<locked>>72%36,230 psi89%1283 fps100%
Vihtavuori N110*<<locked>>84%33,576 psi83%1289 fps91.5%
Vihtavuori N32C Tin Star<<locked>>84%35,085 psi86%1010 fps100%
Vihtavuori N350²<<locked>>64%35,737 psi88%1194 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate 4100*²<<locked>>68%30,835 psi76%1230 fps86.4%
ADI AP 100²<<locked>>60%25,860 psi64%1089 fps99.8%
Alliant 2400*²<<locked>>60%26,861 psi66%1158 fps87%
Alliant BLUE DOT*²<<locked>>60%25,686 psi63%1119 fps93.5%
Alliant Herco²<<locked>>60%26,948 psi66%1043 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>60%25,237 psi62%945 fps100%
Hodgdon Clays²<<locked>>60%28,471 psi70%935 fps100%
Hodgdon LilGun*²<<locked>>68%25,425 psi63%1178 fps85.2%
Hodgdon TrailBoss²4 gr60%13,300 psi33%702 fps100%
Maxam CSB 1²<<locked>>60%32,285 psi80%1063 fps100%
Ramshot Enforcer*²<<locked>>60%26,005 psi64%1148 fps87.4%
ReloadSwiss RS 14²4.1 gr60%13,039 psi32%715 fps100%
ReloadSwiss RS 30*<<locked>>88%30,937 psi76%1273 fps85.4%
SNPE Vectan A0²<<locked>>60%32,692 psi81%1102 fps100%
SNPE Vectan BA6 1/2*²<<locked>>76%21,857 psi54%1073 fps86.5%
SNPE Vectan BA7 1/2²<<locked>>60%29,936 psi74%1119 fps100%
Vihtavuori 3N38²<<locked>>60%26,614 psi66%1122 fps97.5%
Vihtavuori N105²<<locked>>60%25,266 psi62%1119 fps99.1%
Vihtavuori N110*²<<locked>>76%26,382 psi65%1168 fps86.8%
Vihtavuori N32C Tin Star²5.5 gr60%21,669 psi53%840 fps100%
Vihtavuori N350²<<locked>>60%31,618 psi78%1142 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 21 powders for .30 Picra loaded with the .307 | 150gr | Rhino Solid Shank. ReloadSwiss RS 30 delivers the highest muzzle velocity at 1,335 fps; across all powders the maximum-charge window runs from 928 fps to 1,335 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 21 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.307" calls for a 1:16.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .30 Picra with the .307 | 150gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4100, Alliant 2400, Hodgdon LilGun burn incompletely and react more sensitively to barrel length and temperature. ADI AP 100, Alliant BLUE DOT, Alliant Herco stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data