
Load Specifications
Load data in caliber .30 Fl. N.E. Purdey with .311 | 150gr | Frontier PH HPFB bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Winchester 748 and Hodgdon BL-C2.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 88% | 40,654 psi | 88% | 2549 fps | 99.9% |
| Accurate 2460 | <<locked>> | 86% | 41,626 psi | 90% | 2592 fps | 98.6% |
| Accurate 2495 | <<locked>> | 96% | 41,365 psi | 89% | 2631 fps | 100% |
| Accurate 2520 | <<locked>> | 90% | 41,814 psi | 90% | 2638 fps | 98.4% |
| Accurate 4064 | <<locked>> | 98% | 40,959 psi | 88% | 2648 fps | 99.1% |
| ADI AR 2219 | <<locked>> | 82% | 41,031 psi | 88% | 2602 fps | 99.3% |
| ADI Benchmark 8208 | <<locked>> | 88% | 39,900 psi | 86% | 2556 fps | 96% |
| Alliant AR-Comp | <<locked>> | 90% | 40,059 psi | 86% | 2621 fps | 100% |
| Alliant Reloder- TS 15.5 | <<locked>> | 98% | 41,365 psi | 89% | 2641 fps | 96.2% |
| Alliant Reloder-10x | <<locked>> | 84% | 41,278 psi | 89% | 2569 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 41,379 psi | 89% | 2503 fps | 99.5% |
| Bofors RP3 | <<locked>> | 98% | 40,509 psi | 87% | 2641 fps | 96.1% |
| Hodgdon Benchmark | <<locked>> | 86% | 40,234 psi | 87% | 2516 fps | 96.8% |
| Hodgdon BL-C2 | <<locked>> | 90% | 39,639 psi | 85% | 2615 fps | 96.8% |
| Hodgdon H322 | <<locked>> | 84% | 39,827 psi | 86% | 2579 fps | 99.2% |
| Hodgdon H335 | <<locked>> | 84% | 40,567 psi | 87% | 2598 fps | 98.6% |
| Hodgdon LEVERevolution | <<locked>> | 94% | 40,814 psi | 88% | 2654 fps | 95.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,996 psi | 71% | 1644 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 40,683 psi | 88% | 2657 fps | 99.8% |
| IMR 4198 | <<locked>> | 82% | 40,205 psi | 87% | 2503 fps | 100% |
| IMR 8208 XBR | <<locked>> | 88% | 39,900 psi | 86% | 2556 fps | 96% |
| Lovex D073.5 | <<locked>> | 86% | 41,582 psi | 90% | 2592 fps | 97.5% |
| Lovex D073.6 | <<locked>> | 92% | 39,943 psi | 86% | 2615 fps | 98% |
| Lovex S062 | <<locked>> | 96% | 41,669 psi | 90% | 2612 fps | 96.7% |
| Norma 201 | <<locked>> | 92% | 41,655 psi | 90% | 2595 fps | 96.6% |
| Norma 202 | <<locked>> | 92% | 41,379 psi | 89% | 2612 fps | 98.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,069 psi | 71% | 1683 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 84% | 39,755 psi | 86% | 2556 fps | 97.5% |
| ReloadSwiss RS 60 | <<locked>> | 98% | 39,595 psi | 85% | 2664 fps | 96.9% |
| Rottweil R 901 | <<locked>> | 88% | 40,480 psi | 87% | 2556 fps | 98.4% |
| Rottweil R 902 | <<locked>> | 94% | 41,640 psi | 90% | 2585 fps | 96.6% |
| Shooters World Match Rifle | <<locked>> | 92% | 39,943 psi | 86% | 2615 fps | 98% |
| Shooters World Precision | <<locked>> | 96% | 41,669 psi | 90% | 2612 fps | 96.7% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 41,379 psi | 89% | 2602 fps | 98.6% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 39,552 psi | 85% | 2533 fps | 99.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 90% | 41,887 psi | 90% | 2530 fps | 98.7% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 40,321 psi | 87% | 2516 fps | 99.2% |
| Somchem S321 | <<locked>> | 86% | 39,972 psi | 86% | 2585 fps | 96.5% |
| Somchem S335 | <<locked>> | 90% | 40,509 psi | 87% | 2526 fps | 99.1% |
| Somchem S355ᴾ | <<locked>> | 100% | 41,974 psi | 90% | 2641 fps | 95.8% |
| Vihtavuori N130 | <<locked>> | 86% | 41,843 psi | 90% | 2526 fps | 100% |
| Vihtavuori N133 | <<locked>> | 90% | 41,452 psi | 89% | 2533 fps | 99.9% |
| Vihtavuori N135 | <<locked>> | 94% | 39,653 psi | 85% | 2585 fps | 99.9% |
| Vihtavuori N140 | <<locked>> | 94% | 41,742 psi | 90% | 2595 fps | 99.1% |
| Vihtavuori N150ᴾ | <<locked>> | 100% | 40,147 psi | 87% | 2579 fps | 96.8% |
| Vihtavuori N530 | <<locked>> | 88% | 39,798 psi | 86% | 2552 fps | 96.1% |
| Vihtavuori N540 | <<locked>> | 94% | 40,147 psi | 87% | 2585 fps | 98.4% |
| Winchester 748 | <<locked>> | 90% | 40,799 psi | 88% | 2638 fps | 97.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 31,720 psi | 68% | 2365 fps | 98.7% |
| Accurate 2460 | <<locked>> | 80% | 34,055 psi | 73% | 2441 fps | 96.8% |
| Accurate 2495 | <<locked>> | 80% | 24,337 psi | 52% | 2247 fps | 96.8% |
| Accurate 2520 | <<locked>> | 82% | 31,589 psi | 68% | 2425 fps | 95.5% |
| Accurate 4064 | <<locked>> | 86% | 27,905 psi | 60% | 2359 fps | 95.5% |
| ADI AR 2219 | <<locked>> | 80% | 38,363 psi | 83% | 2549 fps | 98.9% |
| ADI Benchmark 8208 | <<locked>> | 86% | 37,391 psi | 81% | 2503 fps | 95.3% |
| Alliant AR-Comp | <<locked>> | 80% | 29,066 psi | 63% | 2385 fps | 99.8% |
| Alliant Reloder- TS 15.5 | <<locked>> | 96% | 38,754 psi | 84% | 2592 fps | 95.5% |
| Alliant Reloder-10x | <<locked>> | 80% | 36,579 psi | 79% | 2480 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 38,856 psi | 84% | 2457 fps | 99.2% |
| Bofors RP3 | <<locked>> | 96% | 37,826 psi | 82% | 2589 fps | 95.3% |
| Hodgdon Benchmark | <<locked>> | 82% | 35,708 psi | 77% | 2421 fps | 95.4% |
| Hodgdon BL-C2 | 39.8 gr | 86% | 34,708 psi | 75% | 2510 fps | 95.2% |
| Hodgdon H322 | <<locked>> | 80% | 35,056 psi | 76% | 2480 fps | 98.2% |
| Hodgdon H335 | <<locked>> | 80% | 35,331 psi | 76% | 2490 fps | 97.4% |
| Hodgdon LEVERevolution | <<locked>> | 92% | 38,305 psi | 83% | 2602 fps | 95.1% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,424 psi | 53% | 1467 fps | 100% |
| IMR 3031 | 33.6 gr | 80% | 27,891 psi | 60% | 2359 fps | 96.8% |
| IMR 4198 | <<locked>> | 80% | 37,811 psi | 81% | 2461 fps | 100% |
| IMR 8208 XBR | <<locked>> | 86% | 37,391 psi | 81% | 2503 fps | 95.3% |
| Lovex D073.5 | <<locked>> | 80% | 33,837 psi | 73% | 2434 fps | 95.3% |
| Lovex D073.6 | <<locked>> | 84% | 30,385 psi | 65% | 2408 fps | 95% |
| Lovex S062 | <<locked>> | 92% | 37,072 psi | 80% | 2520 fps | 95.4% |
| Norma 201 | <<locked>> | 88% | 36,782 psi | 79% | 2493 fps | 95.2% |
| Norma 202 | <<locked>> | 82% | 30,110 psi | 65% | 2369 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,352 psi | 52% | 1503 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 80% | 34,867 psi | 75% | 2451 fps | 96.1% |
| ReloadSwiss RS 60 | <<locked>> | 94% | 34,882 psi | 75% | 2549 fps | 95% |
| Rottweil R 901 | <<locked>> | 80% | 31,937 psi | 69% | 2369 fps | 96% |
| Rottweil R 902 | <<locked>> | 90% | 37,072 psi | 80% | 2493 fps | 95.3% |
| Shooters World Match Rifle | <<locked>> | 84% | 30,385 psi | 65% | 2408 fps | 95% |
| Shooters World Precision | <<locked>> | 92% | 37,072 psi | 80% | 2520 fps | 95.4% |
| SNPE Vectan SP 10 | <<locked>> | 80% | 38,769 psi | 84% | 2552 fps | 98.1% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 36,927 psi | 80% | 2480 fps | 99.2% |
| SNPE Vectan Tubal 3000 | <<locked>> | 80% | 30,530 psi | 66% | 2290 fps | 95.7% |
| SNPE Vectan Tubal 5000 | <<locked>> | 82% | 26,426 psi | 57% | 2201 fps | 95.1% |
| Somchem S321 | <<locked>> | 84% | 37,188 psi | 80% | 2526 fps | 95.6% |
| Somchem S335 | <<locked>> | 80% | 29,979 psi | 65% | 2297 fps | 96.5% |
| Somchem S355 | <<locked>> | 98% | 39,262 psi | 85% | 2585 fps | 95% |
| Vihtavuori N130 | <<locked>> | 80% | 34,766 psi | 75% | 2388 fps | 99.7% |
| Vihtavuori N133 | <<locked>> | 80% | 30,269 psi | 65% | 2303 fps | 98.2% |
| Vihtavuori N135 | <<locked>> | 80% | 25,396 psi | 55% | 2254 fps | 96.9% |
| Vihtavuori N140 | <<locked>> | 82% | 28,543 psi | 62% | 2306 fps | 95.4% |
| Vihtavuori N150 | <<locked>> | 96% | 35,389 psi | 76% | 2480 fps | 95.3% |
| Vihtavuori N530 | <<locked>> | 86% | 37,188 psi | 80% | 2497 fps | 95.3% |
| Vihtavuori N540 | <<locked>> | 84% | 29,254 psi | 63% | 2339 fps | 95% |
| Winchester 748 | 38.2 gr | 84% | 33,576 psi | 72% | 2477 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .30 Fl. N.E. Purdey loaded with the .311 | 150gr | Frontier PH HPFB. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,664 fps; across all powders the maximum-charge window runs from 1,644 fps to 2,664 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.311" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S355 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Winchester 748, Hodgdon BL-C2 rank at the top here: for .30 Fl. N.E. Purdey with the .311 | 150gr | Frontier PH HPFB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.