
Load Specifications
Load data in caliber .30 Fl. N.E. Purdey with .310 | 150gr | Rhino Penetrator bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Winchester 748 and Hodgdon BL-C2.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 88% | 40,785 psi | 88% | 2549 fps | 99.9% |
| Accurate 2460 | <<locked>> | 86% | 41,423 psi | 89% | 2589 fps | 98.5% |
| Accurate 2495 | <<locked>> | 96% | 41,176 psi | 89% | 2628 fps | 100% |
| Accurate 2520 | <<locked>> | 90% | 41,582 psi | 90% | 2631 fps | 98.3% |
| Accurate 4064 | <<locked>> | 98% | 41,104 psi | 89% | 2651 fps | 99.1% |
| ADI AR 2219 | <<locked>> | 82% | 40,901 psi | 88% | 2598 fps | 99.3% |
| ADI Benchmark 8208 | <<locked>> | 88% | 39,711 psi | 86% | 2552 fps | 96% |
| Alliant AR-Comp | <<locked>> | 90% | 39,900 psi | 86% | 2618 fps | 100% |
| Alliant Reloder- TS 15.5 | <<locked>> | 98% | 41,220 psi | 89% | 2638 fps | 96.2% |
| Alliant Reloder-10x | <<locked>> | 84% | 41,104 psi | 89% | 2566 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 41,162 psi | 89% | 2500 fps | 99.5% |
| Bofors RP3 | <<locked>> | 98% | 40,364 psi | 87% | 2638 fps | 96% |
| Hodgdon Benchmark | <<locked>> | 86% | 40,089 psi | 86% | 2513 fps | 96.7% |
| Hodgdon BL-C2 | <<locked>> | 90% | 39,784 psi | 86% | 2618 fps | 96.8% |
| Hodgdon H322 | <<locked>> | 84% | 39,943 psi | 86% | 2582 fps | 99.2% |
| Hodgdon H335 | <<locked>> | 84% | 40,379 psi | 87% | 2592 fps | 98.5% |
| Hodgdon LEVERevolution | <<locked>> | 94% | 40,915 psi | 88% | 2654 fps | 95.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 33,054 psi | 71% | 1644 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 40,480 psi | 87% | 2654 fps | 99.7% |
| IMR 4198 | <<locked>> | 82% | 40,306 psi | 87% | 2507 fps | 100% |
| IMR 8208 XBR | <<locked>> | 88% | 39,711 psi | 86% | 2552 fps | 96% |
| Lovex D073.5 | <<locked>> | 86% | 41,423 psi | 89% | 2589 fps | 97.5% |
| Lovex D073.6 | <<locked>> | 92% | 39,798 psi | 86% | 2612 fps | 97.9% |
| Lovex S062 | <<locked>> | 96% | 41,785 psi | 90% | 2612 fps | 96.7% |
| Norma 201 | <<locked>> | 92% | 41,452 psi | 89% | 2589 fps | 96.6% |
| Norma 202 | <<locked>> | 92% | 41,220 psi | 89% | 2608 fps | 98.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,127 psi | 71% | 1683 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 84% | 39,552 psi | 85% | 2549 fps | 97.4% |
| ReloadSwiss RS 60 | <<locked>> | 98% | 39,726 psi | 86% | 2664 fps | 96.9% |
| Rottweil R 901 | <<locked>> | 88% | 40,321 psi | 87% | 2552 fps | 98.3% |
| Rottweil R 902 | <<locked>> | 94% | 41,756 psi | 90% | 2585 fps | 96.6% |
| Shooters World Match Rifle | <<locked>> | 92% | 39,798 psi | 86% | 2612 fps | 97.9% |
| Shooters World Precision | <<locked>> | 96% | 41,785 psi | 90% | 2612 fps | 96.7% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 41,495 psi | 89% | 2605 fps | 98.7% |
| SNPE Vectan SP 3 | <<locked>> | 84% | 41,843 psi | 90% | 2575 fps | 99.8% |
| SNPE Vectan Tubal 3000 | <<locked>> | 90% | 41,669 psi | 90% | 2523 fps | 98.6% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 40,176 psi | 87% | 2513 fps | 99.2% |
| Somchem S321 | <<locked>> | 86% | 39,798 psi | 86% | 2582 fps | 96.4% |
| Somchem S335 | <<locked>> | 90% | 40,640 psi | 88% | 2526 fps | 99.1% |
| Somchem S355ᴾ | <<locked>> | 100% | 41,756 psi | 90% | 2635 fps | 95.7% |
| Vihtavuori N130 | <<locked>> | 86% | 41,669 psi | 90% | 2523 fps | 100% |
| Vihtavuori N133 | <<locked>> | 90% | 41,249 psi | 89% | 2530 fps | 99.9% |
| Vihtavuori N135 | <<locked>> | 96% | 41,989 psi | 90% | 2625 fps | 100% |
| Vihtavuori N140 | <<locked>> | 94% | 41,597 psi | 90% | 2592 fps | 99% |
| Vihtavuori N150ᴾ | <<locked>> | 100% | 40,306 psi | 87% | 2579 fps | 96.8% |
| Vihtavuori N530 | <<locked>> | 88% | 39,929 psi | 86% | 2552 fps | 96.1% |
| Vihtavuori N540 | <<locked>> | 94% | 40,016 psi | 86% | 2582 fps | 98.4% |
| Winchester 748 | <<locked>> | 90% | 40,596 psi | 87% | 2631 fps | 97.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 31,792 psi | 69% | 2365 fps | 98.8% |
| Accurate 2460 | <<locked>> | 80% | 33,924 psi | 73% | 2434 fps | 96.7% |
| Accurate 2495 | <<locked>> | 80% | 24,178 psi | 52% | 2241 fps | 96.7% |
| Accurate 2520 | <<locked>> | 82% | 31,720 psi | 68% | 2425 fps | 95.6% |
| Accurate 4064 | <<locked>> | 86% | 28,007 psi | 60% | 2359 fps | 95.5% |
| ADI AR 2219 | <<locked>> | 80% | 38,203 psi | 82% | 2546 fps | 98.9% |
| ADI Benchmark 8208 | <<locked>> | 86% | 37,507 psi | 81% | 2507 fps | 95.3% |
| Alliant AR-Comp | <<locked>> | 80% | 28,921 psi | 62% | 2379 fps | 99.8% |
| Alliant Reloder- TS 15.5 | <<locked>> | 96% | 38,624 psi | 83% | 2589 fps | 95.4% |
| Alliant Reloder-10x | <<locked>> | 80% | 36,419 psi | 78% | 2477 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 38,725 psi | 83% | 2454 fps | 99.2% |
| Bofors RP3 | <<locked>> | 96% | 37,956 psi | 82% | 2589 fps | 95.3% |
| Hodgdon Benchmark | <<locked>> | 82% | 35,534 psi | 77% | 2418 fps | 95.3% |
| Hodgdon BL-C2 | 39.7 gr | 86% | 34,577 psi | 75% | 2507 fps | 95.2% |
| Hodgdon H322 | <<locked>> | 80% | 34,896 psi | 75% | 2474 fps | 98.2% |
| Hodgdon H335 | <<locked>> | 80% | 35,186 psi | 76% | 2487 fps | 97.3% |
| Hodgdon LEVERevolution | <<locked>> | 92% | 38,406 psi | 83% | 2602 fps | 95.1% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,468 psi | 53% | 1470 fps | 100% |
| IMR 3031 | 33.5 gr | 80% | 27,760 psi | 60% | 2352 fps | 96.7% |
| IMR 4198 | <<locked>> | 80% | 37,898 psi | 82% | 2461 fps | 100% |
| IMR 8208 XBR | <<locked>> | 86% | 37,507 psi | 81% | 2507 fps | 95.3% |
| Lovex D073.5 | <<locked>> | 80% | 33,707 psi | 73% | 2431 fps | 95.2% |
| Lovex D073.6 | <<locked>> | 86% | 32,401 psi | 70% | 2454 fps | 95.8% |
| Lovex S062 | <<locked>> | 92% | 36,927 psi | 80% | 2516 fps | 95.3% |
| Norma 201 | <<locked>> | 88% | 36,622 psi | 79% | 2490 fps | 95.2% |
| Norma 202 | <<locked>> | 82% | 30,153 psi | 65% | 2369 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,395 psi | 53% | 1503 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 80% | 34,940 psi | 75% | 2451 fps | 96.1% |
| ReloadSwiss RS 60 | <<locked>> | 96% | 37,057 psi | 80% | 2605 fps | 95.9% |
| Rottweil R 901 | <<locked>> | 80% | 31,778 psi | 68% | 2362 fps | 95.9% |
| Rottweil R 902 | <<locked>> | 90% | 36,883 psi | 79% | 2490 fps | 95.2% |
| Shooters World Match Rifle | <<locked>> | 86% | 32,401 psi | 70% | 2454 fps | 95.8% |
| Shooters World Precision | <<locked>> | 92% | 36,927 psi | 80% | 2516 fps | 95.3% |
| SNPE Vectan SP 10 | <<locked>> | 80% | 38,580 psi | 83% | 2546 fps | 98.1% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 37,014 psi | 80% | 2484 fps | 99.2% |
| SNPE Vectan Tubal 3000 | <<locked>> | 80% | 30,632 psi | 66% | 2290 fps | 95.7% |
| SNPE Vectan Tubal 5000 | <<locked>> | 82% | 26,310 psi | 57% | 2198 fps | 95.1% |
| Somchem S321 | <<locked>> | 84% | 37,318 psi | 80% | 2530 fps | 95.7% |
| Somchem S335 | <<locked>> | 80% | 29,849 psi | 64% | 2293 fps | 96.5% |
| Somchem S355 | <<locked>> | 98% | 39,378 psi | 85% | 2589 fps | 95% |
| Vihtavuori N130 | <<locked>> | 80% | 34,867 psi | 75% | 2392 fps | 99.7% |
| Vihtavuori N133 | <<locked>> | 80% | 30,356 psi | 65% | 2306 fps | 98.3% |
| Vihtavuori N135 | <<locked>> | 80% | 25,469 psi | 55% | 2257 fps | 96.9% |
| Vihtavuori N140 | <<locked>> | 82% | 28,645 psi | 62% | 2306 fps | 95.4% |
| Vihtavuori N150 | <<locked>> | 96% | 35,534 psi | 77% | 2484 fps | 95.3% |
| Vihtavuori N530 | <<locked>> | 86% | 37,304 psi | 80% | 2500 fps | 95.3% |
| Vihtavuori N540 | <<locked>> | 84% | 29,167 psi | 63% | 2336 fps | 95% |
| Winchester 748 | 39 gr | 86% | 35,694 psi | 77% | 2530 fps | 95.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .30 Fl. N.E. Purdey loaded with the .310 | 150gr | Rhino Penetrator. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,664 fps; across all powders the maximum-charge window runs from 1,644 fps to 2,664 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.31" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S355 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Winchester 748, Hodgdon BL-C2 rank at the top here: for .30 Fl. N.E. Purdey with the .310 | 150gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.