Load data for .30 Fl. N.E. Purdey + .308 | 90gr | Hornady XTP

Recommended Powder(s): IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 90gr \| Hornady XTP
Manufacturer SKU:	31000
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.516" \| 13.1mm
Caliber:	.30 Fl. N.E. Purdey load data
Case Length (l3):	2.313" \| 58.8mm
Cartridge Length (C.O.L.):	2.707" \| 68.8mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	58.0 Grains of Water \| 3.77 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B2651_C301
Last updated:	2025-01-01

Load data for 48 loads in caliber .30 Fl. N.E. Purdey with .308 | 90gr | Hornady XTP bullet and 24 powders such as IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	41176	89%	**68	100%
ADI AR 2219	<<locked>>	91%	41756	90%	**97	95%
Accurate 2015	<<locked>>	97%	41350	89%	**61	97%
[Accurate 2495]*	<<locked>>	96%	31328	68%	**07	93%
Alliant AR-Comp	<<locked>>	97%	36419	78%	**28	98%
Alliant Reloder-10x	<<locked>>	94%	41539	89%	**91	98%
Alliant Reloder-7	<<locked>>	86%	41191	89%	**19	98%
Baschieri & Pellagri 106	<<locked>>	89%	41147	89%	**56	95%
Hodgdon H322	<<locked>>	97%	41756	90%	**97	95%
[Hodgdon H335]*	<<locked>>	91%	41249	89%	**74	93%
[Hodgdon H4198]*	<<locked>>	87%	41582	90%	**76	94%
Hodgdon TrailBoss	<<locked>>	95%	28369	61%	**03	100%
IMR 4198 👍	<<locked>>	91%	41133	89%	**35	99%
Norma 200 👍	<<locked>>	90%	41147	89%	**71	98%
ReloadSwiss RS 14	<<locked>>	95%	27818	60%	**46	100%
[ReloadSwiss RS 40]*	<<locked>>	94%	41669	90%	**55	92%
[Rottweil R 901]*	<<locked>>	97%	38464	83%	**86	92%
SNPE Vectan BA6 1/2	<<locked>>	85%	41336	89%	**18	100%
[SNPE Vectan SP 10]*	<<locked>>	91%	41640	90%	**81	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	39392	85%	**33	93%
[Somchem S335]*	<<locked>>	96%	37072	80%	**94	93%
Vihtavuori N120	<<locked>>	90%	41104	89%	**19	100%
Vihtavuori N130	<<locked>>	95%	41307	89%	**15	98%
Vihtavuori N133	<<locked>>	97%	35534	77%	**71	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33127	71%	**61	99%
[ADI AR 2219]*	<<locked>>	83%	31343	68%	**09	90%
[Accurate 2015]*	<<locked>>	83%	25686	55%	**15	90%
[Accurate 2495]*	<<locked>>	92%	25904	56%	**23	90%
[Alliant AR-Comp]*	<<locked>>	84%	23627	51%	**69	90%
[Alliant Reloder-10x]*	<<locked>>	81%	27006	58%	**87	92%
Alliant Reloder-7	<<locked>>	81%	34882	75%	**64	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30763	66%	**81	91%
[Hodgdon H322]*	<<locked>>	88%	31343	68%	**09	90%
[Hodgdon H335]*	<<locked>>	86%	34432	74%	**94	90%
[Hodgdon H4198]*	<<locked>>	81%	33866	73%	**79	91%
Hodgdon TrailBoss	<<locked>>	81%	22452	48%	**39	100%
IMR 4198	<<locked>>	81%	30081	65%	**36	95%
Norma 200	<<locked>>	81%	30574	66%	**92	95%
ReloadSwiss RS 14	<<locked>>	81%	22075	48%	**82	100%
[ReloadSwiss RS 40]*	<<locked>>	91%	37710	81%	**56	90%
[Rottweil R 901]*	<<locked>>	93%	34098	73%	**61	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37159	80%	**33	100%
[SNPE Vectan SP 10]*	<<locked>>	85%	34127	74%	**81	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	92%	33982	73%	**95	90%
[Somchem S335]*	<<locked>>	91%	30850	66%	**30	90%
Vihtavuori N120	<<locked>>	81%	31009	67%	**69	99%
[Vihtavuori N130]*	<<locked>>	81%	25889	56%	**82	91%
[Vihtavuori N133]*	<<locked>>	88%	27079	58%	**12	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.