top of page

Load data for .30 Fl. N.E. Purdey + .308 | 86gr | Hornady InterLock RN

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 Fl. N.E. Purdey + .308 | 86gr | Hornady InterLock RN

Load Specifications

Bullet:
.308 | 86gr | Hornady InterLock RN
Manufacturer SKU:
3100
Bullet Weight:
86gr | 5.6g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.500" | 12.7mm
Caliber:
.30 Fl. N.E. Purdey
Case Length (l3):
2.313" | 58.8mm
Cartridge Length (C.O.L.):
2.691" | 68.3mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
58.0 Grains of Water | 3.77 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B2650_C301

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .30 Fl. N.E. Purdey with .308 | 86gr | Hornady InterLock RN bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
89%
41539
89%
**37
100%
[ADI AR 2219]*
<<locked>>
91%
41234
89%
**37
94%
Accurate 2015
<<locked>>
97%
39697
86%
**84
96%
[Accurate 2495]*
<<locked>>
96%
29660
64%
**00
92%
Alliant AR-Comp
<<locked>>
97%
35041
76%
**32
97%
Alliant Reloder-10x
<<locked>>
94%
40930
88%
**37
97%
Alliant Reloder-7
<<locked>>
87%
41495
89%
**81
98%
Baschieri & Pellagri 106
<<locked>>
90%
41292
89%
**05
95%
[Hodgdon H322]*
<<locked>>
97%
40277
87%
**07
93%
[Hodgdon H335]*
<<locked>>
92%
41336
89%
**30
93%
[Hodgdon H4198]*
<<locked>>
88%
41104
89%
**22
93%
Hodgdon TrailBoss
<<locked>>
95%
28050
60%
**46
100%
IMR 4198
<<locked>>
92%
41408
89%
**07
98%
Norma 200
<<locked>>
91%
41220
89%
**27
98%
ReloadSwiss RS 14
<<locked>>
95%
27470
59%
**88
100%
SNPE Vectan BA6 1/2
<<locked>>
86%
41713
90%
**91
100%
[SNPE Vectan SP 10]*
<<locked>>
91%
41017
88%
**17
92%
[Somchem S335]*
<<locked>>
96%
35679
77%
**17
92%
Vihtavuori N120 👍
<<locked>>
91%
41321
89%
**84
100%
Vihtavuori N130
<<locked>>
96%
41336
89%
**68
97%
[Vihtavuori N133]*
<<locked>>
97%
34287
74%
**94
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31865
69%
**94
98%
[ADI AR 2219]*
<<locked>>
85%
32880
71%
**07
90%
[Accurate 2015]*
<<locked>>
85%
26890
58%
**13
90%
[Accurate 2495]*
<<locked>>
94%
26934
58%
**18
90%
[Alliant AR-Comp]*
<<locked>>
86%
24671
53%
**71
90%
[Alliant Reloder-10x]*
<<locked>>
81%
25904
56%
**97
91%
Alliant Reloder-7
<<locked>>
81%
33663
73%
**84
96%
[Baschieri & Pellagri 106]*
<<locked>>
82%
30443
66%
**23
90%
[Hodgdon H322]*
<<locked>>
90%
32880
71%
**07
90%
[Hodgdon H335]*
<<locked>>
88%
35940
77%
**79
90%
[Hodgdon H4198]*
<<locked>>
82%
33504
72%
**15
90%
Hodgdon TrailBoss
<<locked>>
81%
22176
48%
**78
100%
[IMR 4198]*
<<locked>>
81%
29124
63%
**53
94%
[Norma 200]*
<<locked>>
81%
29312
63%
**02
94%
ReloadSwiss RS 14
<<locked>>
81%
21770
47%
**21
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
36056
78%
**76
100%
[SNPE Vectan SP 10]*
<<locked>>
87%
35607
77%
**79
90%
[Somchem S335]*
<<locked>>
93%
32242
69%
**25
90%
Vihtavuori N120
<<locked>>
81%
29834
64%
**92
99%
[Vihtavuori N130]*
<<locked>>
82%
25425
55%
**12
90%
[Vihtavuori N133]*
<<locked>>
91%
28413
61%
**10
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page