
Load Specifications
Load data in caliber .30 Fl. N.E. Purdey with .308 | 147gr | CamPro FMJ BT bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Hodgdon BL-C2 and Lovex D073.6.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 88% | 41,220 psi | 89% | 2595 fps | 99.9% |
| Accurate 2460 | <<locked>> | 86% | 41,945 psi | 90% | 2635 fps | 98.6% |
| Accurate 2495 | <<locked>> | 96% | 41,669 psi | 90% | 2674 fps | 100% |
| Accurate 2520 | <<locked>> | 88% | 39,334 psi | 85% | 2628 fps | 97.8% |
| Accurate 4064 | <<locked>> | 98% | 41,524 psi | 89% | 2697 fps | 99.2% |
| ADI AR 2219 | <<locked>> | 82% | 41,249 psi | 89% | 2644 fps | 99.3% |
| ADI Benchmark 8208 | <<locked>> | 88% | 40,248 psi | 87% | 2602 fps | 96.1% |
| Alliant AR-Comp | <<locked>> | 90% | 40,524 psi | 87% | 2667 fps | 100% |
| Alliant Reloder- TS 15.5 | <<locked>> | 98% | 41,814 psi | 90% | 2690 fps | 96.3% |
| Alliant Reloder-10x | <<locked>> | 84% | 41,698 psi | 90% | 2615 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 41,698 psi | 90% | 2546 fps | 99.6% |
| Bofors RP3 | <<locked>> | 98% | 40,944 psi | 88% | 2687 fps | 96.2% |
| Hodgdon Benchmark | <<locked>> | 86% | 40,393 psi | 87% | 2556 fps | 96.8% |
| Hodgdon BL-C2 | <<locked>> | 90% | 40,118 psi | 86% | 2661 fps | 96.9% |
| Hodgdon H322 | <<locked>> | 84% | 40,364 psi | 87% | 2628 fps | 99.2% |
| Hodgdon H335 | <<locked>> | 84% | 40,901 psi | 88% | 2641 fps | 98.6% |
| Hodgdon LEVERevolution | <<locked>> | 94% | 41,437 psi | 89% | 2703 fps | 96.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 33,069 psi | 71% | 1673 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 41,089 psi | 89% | 2703 fps | 99.8% |
| IMR 4198 | <<locked>> | 82% | 40,698 psi | 88% | 2552 fps | 100% |
| IMR 8208 XBR | <<locked>> | 88% | 40,248 psi | 87% | 2602 fps | 96.1% |
| Lovex D073.5 | <<locked>> | 86% | 41,829 psi | 90% | 2635 fps | 97.6% |
| Lovex D073.6 | <<locked>> | 92% | 40,205 psi | 87% | 2657 fps | 98% |
| Lovex S062 | <<locked>> | 94% | 39,595 psi | 85% | 2608 fps | 96.1% |
| Norma 201 | <<locked>> | 92% | 41,974 psi | 90% | 2638 fps | 96.7% |
| Norma 202 | <<locked>> | 92% | 41,727 psi | 90% | 2657 fps | 98.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,141 psi | 71% | 1713 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 84% | 40,219 psi | 87% | 2602 fps | 97.6% |
| ReloadSwiss RS 60 | <<locked>> | 98% | 40,089 psi | 86% | 2713 fps | 97.1% |
| Rottweil R 901 | <<locked>> | 88% | 40,973 psi | 88% | 2602 fps | 98.4% |
| Rottweil R 902 | <<locked>> | 92% | 39,639 psi | 85% | 2582 fps | 96% |
| Rottweil R 903ᴾ | <<locked>> | 100% | 40,828 psi | 88% | 2674 fps | 95.8% |
| Shooters World Match Rifle | <<locked>> | 92% | 40,205 psi | 87% | 2657 fps | 98% |
| Shooters World Precision | <<locked>> | 94% | 39,595 psi | 85% | 2608 fps | 96.1% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 41,771 psi | 90% | 2648 fps | 98.7% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 39,943 psi | 86% | 2579 fps | 99.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 88% | 39,624 psi | 85% | 2523 fps | 98.3% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 40,915 psi | 88% | 2566 fps | 99.3% |
| Somchem S321 | <<locked>> | 86% | 40,234 psi | 87% | 2628 fps | 96.5% |
| Somchem S335 | <<locked>> | 90% | 40,872 psi | 88% | 2569 fps | 99.1% |
| Vihtavuori N130 | <<locked>> | 84% | 39,755 psi | 86% | 2526 fps | 100% |
| Vihtavuori N133 | <<locked>> | 90% | 41,611 psi | 90% | 2572 fps | 99.9% |
| Vihtavuori N135 | <<locked>> | 94% | 40,074 psi | 86% | 2631 fps | 99.9% |
| Vihtavuori N140 | <<locked>> | 92% | 39,668 psi | 85% | 2595 fps | 98.7% |
| Vihtavuori N150ᴾ | <<locked>> | 100% | 40,828 psi | 88% | 2628 fps | 96.9% |
| Vihtavuori N530 | <<locked>> | 88% | 40,118 psi | 86% | 2595 fps | 96.2% |
| Vihtavuori N540 | <<locked>> | 94% | 40,596 psi | 87% | 2628 fps | 98.5% |
| Winchester 748 | <<locked>> | 90% | 41,292 psi | 89% | 2684 fps | 97.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 32,097 psi | 69% | 2408 fps | 98.8% |
| Accurate 2460 | <<locked>> | 80% | 34,272 psi | 74% | 2480 fps | 96.8% |
| Accurate 2495 | <<locked>> | 80% | 24,613 psi | 53% | 2287 fps | 96.8% |
| Accurate 2520 | <<locked>> | 82% | 32,010 psi | 69% | 2467 fps | 95.6% |
| Accurate 4064 | <<locked>> | 86% | 28,326 psi | 61% | 2402 fps | 95.6% |
| ADI AR 2219 | <<locked>> | 80% | 38,595 psi | 83% | 2592 fps | 99% |
| ADI Benchmark 8208 | <<locked>> | 86% | 37,753 psi | 81% | 2549 fps | 95.4% |
| Alliant AR-Comp | <<locked>> | 80% | 29,399 psi | 63% | 2428 fps | 99.8% |
| Alliant Reloder- TS 15.5 | <<locked>> | 96% | 39,233 psi | 85% | 2638 fps | 95.6% |
| Alliant Reloder-10x | <<locked>> | 80% | 36,724 psi | 79% | 2520 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 39,262 psi | 85% | 2500 fps | 99.3% |
| Bofors RP3 | <<locked>> | 96% | 38,276 psi | 82% | 2635 fps | 95.4% |
| Hodgdon Benchmark | <<locked>> | 82% | 35,911 psi | 77% | 2464 fps | 95.4% |
| Hodgdon BL-C2 | 40.8 gr | 86% | 34,998 psi | 75% | 2552 fps | 95.3% |
| Hodgdon H322 | <<locked>> | 80% | 35,331 psi | 76% | 2520 fps | 98.3% |
| Hodgdon H335 | <<locked>> | 80% | 35,752 psi | 77% | 2536 fps | 97.5% |
| Hodgdon LEVERevolution | <<locked>> | 92% | 38,711 psi | 83% | 2644 fps | 95.2% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,439 psi | 53% | 1496 fps | 100% |
| IMR 3031 | 34.4 gr | 80% | 28,007 psi | 60% | 2395 fps | 96.8% |
| IMR 4198 | <<locked>> | 80% | 38,334 psi | 83% | 2507 fps | 100% |
| IMR 8208 XBR | <<locked>> | 86% | 37,753 psi | 81% | 2549 fps | 95.4% |
| Lovex D073.5 | <<locked>> | 80% | 34,026 psi | 73% | 2474 fps | 95.3% |
| Lovex D073.6 | 38.6 gr | 84% | 30,792 psi | 66% | 2451 fps | 95.1% |
| Lovex S062 | <<locked>> | 92% | 37,434 psi | 81% | 2562 fps | 95.5% |
| Norma 201 | <<locked>> | 88% | 37,188 psi | 80% | 2539 fps | 95.3% |
| Norma 202 | <<locked>> | 80% | 28,616 psi | 62% | 2362 fps | 95% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,352 psi | 52% | 1529 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 80% | 35,099 psi | 76% | 2493 fps | 96.2% |
| ReloadSwiss RS 60 | <<locked>> | 94% | 35,157 psi | 76% | 2595 fps | 95.1% |
| Rottweil R 901 | <<locked>> | 80% | 32,285 psi | 70% | 2411 fps | 96.1% |
| Rottweil R 902 | <<locked>> | 90% | 37,478 psi | 81% | 2539 fps | 95.4% |
| Rottweil R 903 | <<locked>> | 98% | 38,174 psi | 82% | 2621 fps | 95% |
| Shooters World Match Rifle | <<locked>> | 84% | 30,792 psi | 66% | 2451 fps | 95.1% |
| Shooters World Precision | <<locked>> | 92% | 37,434 psi | 81% | 2562 fps | 95.5% |
| SNPE Vectan SP 10 | <<locked>> | 80% | 39,175 psi | 84% | 2598 fps | 98.2% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 37,318 psi | 80% | 2526 fps | 99.2% |
| SNPE Vectan Tubal 3000 | <<locked>> | 80% | 30,879 psi | 67% | 2333 fps | 95.8% |
| SNPE Vectan Tubal 5000 | <<locked>> | 82% | 26,687 psi | 57% | 2244 fps | 95.2% |
| Somchem S321 | <<locked>> | 84% | 37,768 psi | 81% | 2575 fps | 95.8% |
| Somchem S335 | <<locked>> | 80% | 30,269 psi | 65% | 2339 fps | 96.6% |
| Vihtavuori N130 | <<locked>> | 80% | 35,186 psi | 76% | 2434 fps | 99.7% |
| Vihtavuori N133 | <<locked>> | 80% | 30,647 psi | 66% | 2346 fps | 98.3% |
| Vihtavuori N135 | <<locked>> | 80% | 25,715 psi | 55% | 2297 fps | 97% |
| Vihtavuori N140 | <<locked>> | 82% | 28,776 psi | 62% | 2346 fps | 95.4% |
| Vihtavuori N150 | <<locked>> | 96% | 35,853 psi | 77% | 2526 fps | 95.5% |
| Vihtavuori N530 | <<locked>> | 86% | 37,579 psi | 81% | 2543 fps | 95.4% |
| Vihtavuori N540 | <<locked>> | 84% | 29,399 psi | 63% | 2375 fps | 95.1% |
| Winchester 748 | <<locked>> | 84% | 33,895 psi | 73% | 2523 fps | 95.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .30 Fl. N.E. Purdey loaded with the .308 | 147gr | CamPro FMJ BT. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,713 fps; across all powders the maximum-charge window runs from 1,673 fps to 2,713 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 147.0 gr projectile in 0.308" calls for a 1:13.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Rottweil R 903 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Hodgdon BL-C2, Lovex D073.6 rank at the top here: for .30 Fl. N.E. Purdey with the .308 | 147gr | CamPro FMJ BT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.