
Load Specifications
Load data in caliber .30 Fl. N.E. Purdey with .308 | 123gr | Reichenberg HDB Universal bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Accurate 2520 and Alliant AR-Comp.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 92% | 40,393 psi | 87% | 2838 fps | 99.2% |
| Accurate 2460 | <<locked>> | 90% | 41,350 psi | 89% | 2874 fps | 97% |
| Accurate 2495ᴾ | <<locked>> | 100% | 39,624 psi | 85% | 2900 fps | 99.4% |
| Accurate 2520 | <<locked>> | 94% | 41,321 psi | 89% | 2917 fps | 96.6% |
| Accurate 4064ᴾ | <<locked>> | 100% | 36,854 psi | 79% | 2854 fps | 96.8% |
| Accurate LT-30 | <<locked>> | 84% | 41,321 psi | 89% | 2762 fps | 98.3% |
| Accurate LT-32 | <<locked>> | 84% | 41,698 psi | 90% | 2769 fps | 96.5% |
| ADI AR 2207 | <<locked>> | 82% | 40,596 psi | 87% | 2818 fps | 100% |
| ADI AR 2219 | <<locked>> | 86% | 41,437 psi | 89% | 2900 fps | 98.2% |
| Alliant AR-Comp | <<locked>> | 94% | 39,595 psi | 85% | 2913 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 88% | 41,147 psi | 89% | 2871 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 39,552 psi | 85% | 2746 fps | 98.2% |
| Hodgdon H322 | <<locked>> | 88% | 40,016 psi | 86% | 2871 fps | 97.9% |
| Hodgdon H335 | <<locked>> | 88% | 40,857 psi | 88% | 2887 fps | 97.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,894 psi | 69% | 1837 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 40,335 psi | 87% | 2943 fps | 98.8% |
| IMR 4198 | <<locked>> | 86% | 40,422 psi | 87% | 2808 fps | 100% |
| Lovex D073.4 | <<locked>> | 84% | 41,698 psi | 90% | 2887 fps | 96.4% |
| Lovex D073.6 | <<locked>> | 96% | 39,030 psi | 84% | 2881 fps | 96% |
| Norma 200 | <<locked>> | 84% | 40,901 psi | 88% | 2848 fps | 99.9% |
| Norma 202 | <<locked>> | 96% | 41,176 psi | 89% | 2897 fps | 97.3% |
| Rottweil R 901 | <<locked>> | 92% | 39,711 psi | 86% | 2828 fps | 96.6% |
| Shooters World AR Plus | <<locked>> | 84% | 41,698 psi | 90% | 2887 fps | 96.4% |
| Shooters World Match Rifle | <<locked>> | 96% | 39,030 psi | 84% | 2881 fps | 96% |
| SNPE Vectan SP 10 | <<locked>> | 86% | 41,858 psi | 90% | 2900 fps | 97.3% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 39,436 psi | 85% | 2825 fps | 98.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 94% | 41,858 psi | 90% | 2808 fps | 97.2% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 40,350 psi | 87% | 2795 fps | 97.9% |
| Somchem S335 | <<locked>> | 94% | 40,379 psi | 87% | 2805 fps | 97.8% |
| Vihtavuori N120 | <<locked>> | 82% | 40,799 psi | 88% | 2772 fps | 100% |
| Vihtavuori N130 | <<locked>> | 90% | 41,814 psi | 90% | 2818 fps | 99.7% |
| Vihtavuori N133 | <<locked>> | 94% | 41,278 psi | 89% | 2818 fps | 99.2% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 41,379 psi | 89% | 2913 fps | 99.5% |
| Vihtavuori N140 | <<locked>> | 98% | 41,452 psi | 89% | 2874 fps | 97.6% |
| Vihtavuori N540 | <<locked>> | 98% | 40,045 psi | 86% | 2861 fps | 96.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 27,340 psi | 59% | 2520 fps | 95.5% |
| Accurate 2460 | <<locked>> | 86% | 35,810 psi | 77% | 2756 fps | 95.4% |
| Accurate 2495 | <<locked>> | 88% | 26,020 psi | 56% | 2566 fps | 95.6% |
| Accurate 2520 | 44 gr | 90% | 35,911 psi | 77% | 2799 fps | 95% |
| Accurate 4064 | <<locked>> | 96% | 32,256 psi | 70% | 2746 fps | 95.2% |
| Accurate LT-30 | <<locked>> | 80% | 36,419 psi | 78% | 2657 fps | 97.1% |
| Accurate LT-32 | <<locked>> | 80% | 36,796 psi | 79% | 2661 fps | 95% |
| ADI AR 2207 | <<locked>> | 80% | 38,261 psi | 82% | 2772 fps | 100% |
| ADI AR 2219 | <<locked>> | 80% | 33,663 psi | 73% | 2720 fps | 96% |
| Alliant AR-Comp | 35.9 gr | 80% | 25,237 psi | 54% | 2530 fps | 97.2% |
| Alliant Reloder-10x | <<locked>> | 80% | 31,807 psi | 69% | 2657 fps | 98.3% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 34,621 psi | 75% | 2638 fps | 96.9% |
| Hodgdon H322 | <<locked>> | 82% | 32,967 psi | 71% | 2703 fps | 95.8% |
| Hodgdon H335 | <<locked>> | 84% | 35,549 psi | 77% | 2769 fps | 95.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,424 psi | 50% | 1644 fps | 100% |
| IMR 3031 | 38.5 gr | 86% | 29,167 psi | 63% | 2657 fps | 95.1% |
| IMR 4198 | <<locked>> | 80% | 33,707 psi | 73% | 2657 fps | 99.3% |
| Lovex D073.4 | <<locked>> | 82% | 38,740 psi | 83% | 2825 fps | 95.5% |
| Lovex D073.6 | <<locked>> | 94% | 36,550 psi | 79% | 2825 fps | 95.2% |
| Norma 200 | <<locked>> | 80% | 35,926 psi | 77% | 2743 fps | 99.5% |
| Norma 202 | <<locked>> | 90% | 33,678 psi | 73% | 2726 fps | 95% |
| Rottweil R 901 | <<locked>> | 88% | 35,056 psi | 76% | 2720 fps | 95.1% |
| Shooters World AR Plus | <<locked>> | 82% | 38,740 psi | 83% | 2825 fps | 95.5% |
| Shooters World Match Rifle | <<locked>> | 94% | 36,550 psi | 79% | 2825 fps | 95.2% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 36,390 psi | 78% | 2782 fps | 95.7% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 32,576 psi | 70% | 2664 fps | 96.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 88% | 34,664 psi | 75% | 2654 fps | 95.1% |
| SNPE Vectan Tubal 5000 | <<locked>> | 92% | 31,415 psi | 68% | 2589 fps | 95.1% |
| Somchem S335 | <<locked>> | 86% | 31,444 psi | 68% | 2598 fps | 95.1% |
| Vihtavuori N120 | <<locked>> | 80% | 38,435 psi | 83% | 2730 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 30,719 psi | 66% | 2569 fps | 97.7% |
| Vihtavuori N133 | <<locked>> | 82% | 28,239 psi | 61% | 2510 fps | 95.7% |
| Vihtavuori N135 | <<locked>> | 86% | 26,411 psi | 57% | 2546 fps | 95.3% |
| Vihtavuori N140 | <<locked>> | 92% | 34,301 psi | 74% | 2713 fps | 95.6% |
| Vihtavuori N540 | <<locked>> | 94% | 35,099 psi | 76% | 2749 fps | 95.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .30 Fl. N.E. Purdey loaded with the .308 | 123gr | Reichenberg HDB Universal. IMR 3031 delivers the highest muzzle velocity at 2,943 fps; across all powders the maximum-charge window runs from 1,837 fps to 2,943 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 69–90 %, leaving at least 10 % headroom. The 123.0 gr projectile in 0.308" calls for a 1:16.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Accurate 2520, Alliant AR-Comp rank at the top here: for .30 Fl. N.E. Purdey with the .308 | 123gr | Reichenberg HDB Universal they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.