
Load Specifications
Load data in caliber .30 Fl. N.E. Purdey with .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 94% | 40,074 psi | 86% | 2848 fps | 98.8% |
| Accurate 2460 | <<locked>> | 92% | 41,263 psi | 89% | 2890 fps | 96.4% |
| Accurate 2495ᴾ | <<locked>> | 100% | 36,492 psi | 79% | 2854 fps | 98.5% |
| Accurate 2520 | <<locked>> | 96% | 41,249 psi | 89% | 2930 fps | 96% |
| Accurate LT-30 | <<locked>> | 86% | 41,829 psi | 90% | 2785 fps | 97.9% |
| ADI AR 2207 | <<locked>> | 84% | 41,002 psi | 88% | 2848 fps | 100% |
| ADI AR 2219 | <<locked>> | 88% | 41,727 psi | 90% | 2920 fps | 97.8% |
| Alliant AR-Comp | <<locked>> | 96% | 39,769 psi | 86% | 2936 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 90% | 41,060 psi | 88% | 2887 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 82% | 39,755 psi | 86% | 2795 fps | 99.6% |
| Baschieri & Pellagri 106 | <<locked>> | 86% | 39,856 psi | 86% | 2766 fps | 97.8% |
| Hodgdon H322 | <<locked>> | 90% | 40,190 psi | 87% | 2890 fps | 97.4% |
| Hodgdon H335 | <<locked>> | 90% | 40,930 psi | 88% | 2904 fps | 96.5% |
| Hodgdon H4198 | <<locked>> | 82% | 40,886 psi | 88% | 2782 fps | 97.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,372 psi | 68% | 1837 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 40,248 psi | 87% | 2956 fps | 98.3% |
| IMR 4198 | <<locked>> | 88% | 40,698 psi | 88% | 2831 fps | 99.9% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 41,771 psi | 90% | 2953 fps | 96.1% |
| Norma 200 | <<locked>> | 86% | 41,031 psi | 88% | 2871 fps | 99.8% |
| Norma 202 | <<locked>> | 98% | 40,857 psi | 88% | 2907 fps | 96.6% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,140 psi | 67% | 1880 fps | 100% |
| Rottweil R 901 | <<locked>> | 94% | 39,726 psi | 86% | 2844 fps | 96% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 41,771 psi | 90% | 2953 fps | 96.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 82% | 41,553 psi | 90% | 2598 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 86% | 39,160 psi | 84% | 2861 fps | 96% |
| SNPE Vectan SP 3 | <<locked>> | 88% | 39,653 psi | 85% | 2844 fps | 98.1% |
| SNPE Vectan Tubal 3000 | <<locked>> | 96% | 41,930 psi | 90% | 2825 fps | 96.6% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 38,014 psi | 82% | 2756 fps | 96.7% |
| Somchem S335 | <<locked>> | 96% | 40,364 psi | 87% | 2818 fps | 97.3% |
| Vihtavuori N120 | <<locked>> | 84% | 41,176 psi | 89% | 2805 fps | 100% |
| Vihtavuori N130 | <<locked>> | 92% | 41,945 psi | 90% | 2841 fps | 99.5% |
| Vihtavuori N133 | <<locked>> | 96% | 41,176 psi | 89% | 2831 fps | 98.9% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 38,493 psi | 83% | 2877 fps | 98.8% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 41,582 psi | 90% | 2890 fps | 97.1% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 39,972 psi | 86% | 2871 fps | 96.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 84% | 29,124 psi | 63% | 2589 fps | 95.7% |
| Accurate 2460 | <<locked>> | 90% | 38,551 psi | 83% | 2831 fps | 95.7% |
| Accurate 2495 | <<locked>> | 92% | 27,456 psi | 59% | 2628 fps | 95.7% |
| Accurate 2520 | <<locked>> | 94% | 38,522 psi | 83% | 2874 fps | 95.2% |
| Accurate LT-30 | <<locked>> | 80% | 34,635 psi | 75% | 2628 fps | 95.9% |
| ADI AR 2207 | <<locked>> | 80% | 35,969 psi | 78% | 2746 fps | 100% |
| ADI AR 2219 | <<locked>> | 82% | 33,910 psi | 73% | 2740 fps | 95.4% |
| Alliant AR-Comp | 34.6 gr | 80% | 23,772 psi | 51% | 2487 fps | 95.6% |
| Alliant Reloder-10x | <<locked>> | 80% | 29,820 psi | 64% | 2621 fps | 97.2% |
| Alliant Reloder-7 | <<locked>> | 80% | 37,492 psi | 81% | 2746 fps | 99.3% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 32,692 psi | 70% | 2602 fps | 95.7% |
| Hodgdon H322 | 37.5 gr | 84% | 33,185 psi | 72% | 2723 fps | 95.1% |
| Hodgdon H335 | <<locked>> | 88% | 38,319 psi | 83% | 2848 fps | 95.8% |
| Hodgdon H4198 | <<locked>> | 80% | 38,276 psi | 82% | 2726 fps | 96.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,960 psi | 49% | 1640 fps | 100% |
| IMR 3031 | 38.8 gr | 90% | 31,067 psi | 67% | 2726 fps | 95.2% |
| IMR 4198 | <<locked>> | 80% | 32,039 psi | 69% | 2631 fps | 98.6% |
| Lovex D073.6 | <<locked>> | 98% | 38,928 psi | 84% | 2894 fps | 95.3% |
| Norma 200 | <<locked>> | 80% | 33,504 psi | 72% | 2707 fps | 98.9% |
| Norma 202 | <<locked>> | 94% | 35,998 psi | 78% | 2799 fps | 95.2% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,902 psi | 49% | 1683 fps | 100% |
| Rottweil R 901 | <<locked>> | 92% | 37,217 psi | 80% | 2789 fps | 95.2% |
| Shooters World Match Rifle | <<locked>> | 98% | 38,928 psi | 84% | 2894 fps | 95.3% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 39,421 psi | 85% | 2562 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 36,695 psi | 79% | 2805 fps | 95.2% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 30,647 psi | 66% | 2625 fps | 95.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 36,912 psi | 80% | 2717 fps | 95.2% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 33,533 psi | 72% | 2654 fps | 95.3% |
| Somchem S335 | <<locked>> | 90% | 33,475 psi | 72% | 2664 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 36,172 psi | 78% | 2707 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 28,906 psi | 62% | 2536 fps | 96.6% |
| Vihtavuori N133 | <<locked>> | 84% | 28,500 psi | 61% | 2533 fps | 95.1% |
| Vihtavuori N135 | <<locked>> | 90% | 28,021 psi | 60% | 2608 fps | 95.4% |
| Vihtavuori N140 | <<locked>> | 96% | 36,492 psi | 79% | 2779 fps | 95.6% |
| Vihtavuori N540 | <<locked>> | 98% | 37,478 psi | 81% | 2818 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .30 Fl. N.E. Purdey loaded with the .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP. IMR 3031 delivers the highest muzzle velocity at 2,956 fps; across all powders the maximum-charge window runs from 1,837 fps to 2,956 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, Lovex D073.6 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for .30 Fl. N.E. Purdey with the .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.