Load data for .30 Fl. N.E. Purdey + .308 | 110gr | Winchester Hollow Point

.30 Fl. N.E. Purdey cartridge drawing
Winchester logo

Load Specifications

Bullet Manufacturer:Winchester
Bullet Weight:110 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.313"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:58 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.5

Load data in caliber .30 Fl. N.E. Purdey with .308 | 110gr | Winchester Hollow Point bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%40,814 psi88%2989 fps98.5%
Accurate 2460<<locked>>92%41,945 psi90%3025 fps95.9%
Accurate 2495ᴾ<<locked>>100%37,376 psi81%2992 fps98.2%
Accurate LT-30<<locked>>84%39,682 psi86%2864 fps96.8%
ADI AR 2207<<locked>>84%41,133 psi89%2982 fps100%
ADI AR 2219<<locked>>88%41,872 psi90%3051 fps97.2%
Alliant AR-Comp<<locked>>96%40,147 psi87%3071 fps99.9%
Alliant Reloder-10x<<locked>>90%41,452 psi89%3025 fps99.3%
Alliant Reloder-7<<locked>>82%40,219 psi87%2930 fps99.4%
Baschieri & Pellagri 106<<locked>>86%40,190 psi87%2894 fps97.3%
Hodgdon H322<<locked>>90%40,741 psi88%3025 fps96.9%
Hodgdon H335<<locked>>90%41,307 psi89%3035 fps95.9%
Hodgdon H4198<<locked>>82%41,176 psi89%2913 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%31,662 psi68%1942 fps100%
IMR 3031<<locked>>98%40,509 psi87%3087 fps97.7%
IMR 4198<<locked>>88%40,973 psi88%2966 fps99.7%
Norma 200<<locked>>86%41,713 psi90%3012 fps99.7%
Norma 202<<locked>>98%41,278 psi89%3038 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%31,459 psi68%1988 fps100%
SNPE Vectan SP 3<<locked>>88%39,682 psi86%2972 fps97.5%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%38,537 psi83%2884 fps96.2%
Somchem S335<<locked>>96%41,060 psi88%2953 fps96.8%
Vihtavuori N120<<locked>>84%41,292 psi89%2940 fps100%
Vihtavuori N130<<locked>>90%39,871 psi86%2920 fps98.9%
Vihtavuori N133<<locked>>96%41,611 psi90%2966 fps98.5%
Vihtavuori N135ᴾ<<locked>>100%39,073 psi84%3012 fps98.4%
Vihtavuori N140ᴾ<<locked>>100%41,887 psi90%3018 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%29,689 psi64%2713 fps95.1%
Accurate 2460<<locked>>90%39,073 psi84%2963 fps95%
Accurate 2495<<locked>>92%28,340 psi61%2759 fps95.2%
Accurate LT-30<<locked>>80%34,867 psi75%2749 fps95.3%
ADI AR 2207<<locked>>80%36,376 psi78%2881 fps100%
ADI AR 2219<<locked>>84%36,709 psi79%2930 fps95.6%
Alliant AR-Comp37.2 gr82%25,759 psi56%2661 fps95.8%
Alliant Reloder-10x<<locked>>80%30,327 psi65%2749 fps96.7%
Alliant Reloder-7<<locked>>80%37,811 psi81%2877 fps99%
Baschieri & Pellagri 106<<locked>>80%33,156 psi71%2726 fps95%
Hodgdon H32240.3 gr86%35,737 psi77%2904 fps95.3%
Hodgdon H335<<locked>>88%38,653 psi83%2972 fps95.1%
Hodgdon H4198<<locked>>80%38,421 psi83%2851 fps95.7%
Hodgdon TrailBoss<<locked>>80%23,177 psi50%1736 fps100%
IMR 303141.7 gr92%33,605 psi72%2913 fps95.5%
IMR 4198<<locked>>80%32,532 psi70%2762 fps98.2%
Norma 200<<locked>>80%34,345 psi74%2841 fps98.6%
Norma 202<<locked>>96%38,798 psi84%2982 fps95.3%
ReloadSwiss RS 14<<locked>>80%23,148 psi50%1778 fps100%
SNPE Vectan SP 3<<locked>>82%33,025 psi71%2805 fps95.4%
SNPE Vectan Tubal 5000<<locked>>98%36,245 psi78%2831 fps95.4%
Somchem S335<<locked>>92%36,158 psi78%2844 fps95.4%
Vihtavuori N120<<locked>>80%36,564 psi79%2841 fps100%
Vihtavuori N130<<locked>>80%29,370 psi63%2657 fps96%
Vihtavuori N133<<locked>>86%30,792 psi66%2707 fps95.3%
Vihtavuori N135<<locked>>92%30,371 psi65%2789 fps95.6%
Vihtavuori N140<<locked>>96%37,086 psi80%2910 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .30 Fl. N.E. Purdey loaded with the .308 | 110gr | Winchester Hollow Point. IMR 3031 delivers the highest muzzle velocity at 3,087 fps; across all powders the maximum-charge window runs from 1,942 fps to 3,087 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 68–90 %, leaving at least 10 % headroom. The 110.0 gr projectile in 0.308" calls for a 1:14.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for .30 Fl. N.E. Purdey with the .308 | 110gr | Winchester Hollow Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data