
Load Specifications
Load data in caliber .30 Fl. N.E. Purdey with .307 | 150gr | Rhino Penetrator bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Winchester 748 and Hodgdon BL-C2.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 88% | 40,959 psi | 88% | 2552 fps | 99.9% |
| Accurate 2460 | <<locked>> | 86% | 41,568 psi | 90% | 2592 fps | 98.6% |
| Accurate 2495 | <<locked>> | 96% | 41,278 psi | 89% | 2631 fps | 100% |
| Accurate 2520 | <<locked>> | 90% | 41,756 psi | 90% | 2638 fps | 98.4% |
| Accurate 4064 | <<locked>> | 98% | 40,988 psi | 88% | 2648 fps | 99.1% |
| ADI AR 2219 | <<locked>> | 82% | 41,017 psi | 88% | 2602 fps | 99.3% |
| ADI Benchmark 8208 | <<locked>> | 88% | 39,856 psi | 86% | 2556 fps | 96% |
| Alliant AR-Comp | <<locked>> | 90% | 40,016 psi | 86% | 2621 fps | 100% |
| Alliant Reloder- TS 15.5 | <<locked>> | 98% | 41,379 psi | 89% | 2644 fps | 96.2% |
| Alliant Reloder-10x | <<locked>> | 84% | 41,292 psi | 89% | 2569 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 41,336 psi | 89% | 2503 fps | 99.6% |
| Bofors RP3 | <<locked>> | 98% | 40,524 psi | 87% | 2641 fps | 96.1% |
| Hodgdon Benchmark | <<locked>> | 86% | 40,190 psi | 87% | 2516 fps | 96.8% |
| Hodgdon BL-C2 | <<locked>> | 90% | 39,581 psi | 85% | 2615 fps | 96.8% |
| Hodgdon H322 | <<locked>> | 84% | 39,784 psi | 86% | 2579 fps | 99.2% |
| Hodgdon H335 | <<locked>> | 84% | 40,553 psi | 87% | 2598 fps | 98.6% |
| Hodgdon LEVERevolution | <<locked>> | 94% | 40,756 psi | 88% | 2654 fps | 95.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,967 psi | 71% | 1644 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 40,669 psi | 88% | 2657 fps | 99.8% |
| IMR 4198 | <<locked>> | 82% | 40,161 psi | 87% | 2507 fps | 100% |
| IMR 8208 XBR | <<locked>> | 88% | 39,856 psi | 86% | 2556 fps | 96% |
| Lovex D073.5 | <<locked>> | 86% | 41,553 psi | 90% | 2592 fps | 97.5% |
| Lovex D073.6 | <<locked>> | 92% | 39,972 psi | 86% | 2615 fps | 98% |
| Lovex S062 | <<locked>> | 96% | 41,945 psi | 90% | 2615 fps | 96.8% |
| Norma 201 | <<locked>> | 92% | 41,597 psi | 90% | 2595 fps | 96.6% |
| Norma 202 | <<locked>> | 92% | 41,408 psi | 89% | 2612 fps | 98.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,040 psi | 71% | 1683 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 84% | 39,740 psi | 86% | 2556 fps | 97.5% |
| ReloadSwiss RS 60 | <<locked>> | 98% | 39,537 psi | 85% | 2664 fps | 96.9% |
| Rottweil R 901 | <<locked>> | 88% | 40,495 psi | 87% | 2556 fps | 98.4% |
| Rottweil R 902 | <<locked>> | 94% | 41,930 psi | 90% | 2592 fps | 96.7% |
| Shooters World Match Rifle | <<locked>> | 92% | 39,972 psi | 86% | 2615 fps | 98% |
| Shooters World Precision | <<locked>> | 96% | 41,945 psi | 90% | 2615 fps | 96.8% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 41,611 psi | 90% | 2608 fps | 98.7% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 39,523 psi | 85% | 2533 fps | 99.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 90% | 41,814 psi | 90% | 2526 fps | 98.7% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 40,335 psi | 87% | 2520 fps | 99.2% |
| Somchem S321 | <<locked>> | 86% | 39,958 psi | 86% | 2585 fps | 96.5% |
| Somchem S335 | <<locked>> | 90% | 40,495 psi | 87% | 2526 fps | 99.1% |
| Somchem S355ᴾ | <<locked>> | 100% | 41,916 psi | 90% | 2638 fps | 95.8% |
| Vihtavuori N130 | <<locked>> | 86% | 41,829 psi | 90% | 2526 fps | 100% |
| Vihtavuori N133 | <<locked>> | 90% | 41,408 psi | 89% | 2533 fps | 99.9% |
| Vihtavuori N135 | <<locked>> | 94% | 39,639 psi | 85% | 2585 fps | 99.9% |
| Vihtavuori N140 | <<locked>> | 94% | 41,771 psi | 90% | 2595 fps | 99.1% |
| Vihtavuori N150ᴾ | <<locked>> | 100% | 40,451 psi | 87% | 2585 fps | 96.9% |
| Vihtavuori N530 | <<locked>> | 88% | 39,755 psi | 86% | 2552 fps | 96.1% |
| Vihtavuori N540 | <<locked>> | 94% | 40,089 psi | 86% | 2582 fps | 98.4% |
| Winchester 748 | <<locked>> | 90% | 40,756 psi | 88% | 2638 fps | 97.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 31,676 psi | 68% | 2365 fps | 98.7% |
| Accurate 2460 | <<locked>> | 80% | 34,040 psi | 73% | 2441 fps | 96.8% |
| Accurate 2495 | <<locked>> | 80% | 24,294 psi | 52% | 2247 fps | 96.8% |
| Accurate 2520 | <<locked>> | 82% | 31,821 psi | 69% | 2431 fps | 95.6% |
| Accurate 4064 | <<locked>> | 86% | 27,920 psi | 60% | 2359 fps | 95.5% |
| ADI AR 2219 | <<locked>> | 80% | 38,319 psi | 83% | 2549 fps | 98.9% |
| ADI Benchmark 8208 | <<locked>> | 86% | 37,608 psi | 81% | 2510 fps | 95.3% |
| Alliant AR-Comp | <<locked>> | 80% | 29,080 psi | 63% | 2385 fps | 99.8% |
| Alliant Reloder- TS 15.5 | <<locked>> | 96% | 38,696 psi | 83% | 2592 fps | 95.4% |
| Alliant Reloder-10x | <<locked>> | 80% | 36,535 psi | 79% | 2480 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 38,885 psi | 84% | 2457 fps | 99.2% |
| Bofors RP3 | <<locked>> | 96% | 37,768 psi | 81% | 2589 fps | 95.3% |
| Hodgdon Benchmark | <<locked>> | 82% | 35,665 psi | 77% | 2421 fps | 95.4% |
| Hodgdon BL-C2 | 39.8 gr | 86% | 34,722 psi | 75% | 2513 fps | 95.3% |
| Hodgdon H322 | <<locked>> | 80% | 35,012 psi | 75% | 2480 fps | 98.2% |
| Hodgdon H335 | <<locked>> | 80% | 35,288 psi | 76% | 2490 fps | 97.4% |
| Hodgdon LEVERevolution | <<locked>> | 92% | 38,261 psi | 82% | 2598 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,410 psi | 53% | 1467 fps | 100% |
| IMR 3031 | 33.6 gr | 80% | 27,905 psi | 60% | 2359 fps | 96.8% |
| IMR 4198 | <<locked>> | 80% | 38,087 psi | 82% | 2464 fps | 100% |
| IMR 8208 XBR | <<locked>> | 86% | 37,608 psi | 81% | 2510 fps | 95.3% |
| Lovex D073.5 | <<locked>> | 80% | 33,823 psi | 73% | 2434 fps | 95.3% |
| Lovex D073.6 | <<locked>> | 84% | 30,400 psi | 66% | 2408 fps | 95% |
| Lovex S062 | <<locked>> | 92% | 37,028 psi | 80% | 2520 fps | 95.4% |
| Norma 201 | <<locked>> | 88% | 36,738 psi | 79% | 2493 fps | 95.2% |
| Norma 202 | <<locked>> | 82% | 30,066 psi | 65% | 2369 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,337 psi | 52% | 1503 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 80% | 34,824 psi | 75% | 2451 fps | 96.1% |
| ReloadSwiss RS 60 | <<locked>> | 96% | 37,101 psi | 80% | 2605 fps | 96% |
| Rottweil R 901 | <<locked>> | 80% | 31,923 psi | 69% | 2369 fps | 96% |
| Rottweil R 902 | <<locked>> | 90% | 37,028 psi | 80% | 2493 fps | 95.3% |
| Shooters World Match Rifle | <<locked>> | 84% | 30,400 psi | 66% | 2408 fps | 95% |
| Shooters World Precision | <<locked>> | 92% | 37,028 psi | 80% | 2520 fps | 95.4% |
| SNPE Vectan SP 10 | <<locked>> | 80% | 38,725 psi | 83% | 2552 fps | 98.1% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 37,173 psi | 80% | 2487 fps | 99.2% |
| SNPE Vectan Tubal 3000 | <<locked>> | 80% | 30,734 psi | 66% | 2293 fps | 95.7% |
| SNPE Vectan Tubal 5000 | <<locked>> | 82% | 26,440 psi | 57% | 2205 fps | 95.1% |
| Somchem S321 | <<locked>> | 84% | 37,449 psi | 81% | 2533 fps | 95.7% |
| Somchem S335 | <<locked>> | 80% | 29,950 psi | 65% | 2297 fps | 96.5% |
| Somchem S355 | <<locked>> | 98% | 39,204 psi | 84% | 2585 fps | 95% |
| Vihtavuori N130 | <<locked>> | 80% | 35,027 psi | 75% | 2395 fps | 99.7% |
| Vihtavuori N133 | <<locked>> | 80% | 30,516 psi | 66% | 2310 fps | 98.3% |
| Vihtavuori N135 | <<locked>> | 80% | 25,585 psi | 55% | 2260 fps | 97% |
| Vihtavuori N140 | <<locked>> | 82% | 28,558 psi | 62% | 2306 fps | 95.4% |
| Vihtavuori N150 | <<locked>> | 96% | 35,375 psi | 76% | 2480 fps | 95.3% |
| Vihtavuori N530 | <<locked>> | 86% | 37,449 psi | 81% | 2503 fps | 95.4% |
| Vihtavuori N540 | <<locked>> | 84% | 29,283 psi | 63% | 2343 fps | 95.1% |
| Winchester 748 | 38.2 gr | 84% | 33,605 psi | 72% | 2480 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .30 Fl. N.E. Purdey loaded with the .307 | 150gr | Rhino Penetrator. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,664 fps; across all powders the maximum-charge window runs from 1,644 fps to 2,664 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.307" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S355 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Winchester 748, Hodgdon BL-C2 rank at the top here: for .30 Fl. N.E. Purdey with the .307 | 150gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.